| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 19 Mar 2018 17:42:59 -0700
From: Stephen Boyd <sboyd@...nel.org>
To: Amit Nischal <anischal@...eaurora.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...eaurora.org>
Cc: Andy Gross <andy.gross@...aro.org>,
David Brown <david.brown@...aro.org>,
Rajendra Nayak <rnayak@...eaurora.org>,
Odelu Kukatla <okukatla@...eaurora.org>,
Taniya Das <tdas@...eaurora.org>,
linux-arm-msm@...r.kernel.org, linux-soc@...r.kernel.org,
linux-clk@...r.kernel.org, linux-kernel@...r.kernel.org,
Amit Nischal <anischal@...eaurora.org>
Subject: Re: [PATCH v2 4/4] clk: qcom: Add Global Clock controller (GCC) driver for
SDM845
Quoting Amit Nischal (2018-03-07 23:18:15)
> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> index fbf4532..54d0545 100644
> --- a/drivers/clk/qcom/Kconfig
> +++ b/drivers/clk/qcom/Kconfig
> @@ -218,6 +218,16 @@ config MSM_MMCC_8996
> Say Y if you want to support multimedia devices such as display,
> graphics, video encode/decode, camera, etc.
>
> +config SDM_GCC_845
> + tristate "SDM845 Global Clock Controller"
> + depends on COMMON_CLK_QCOM
> + help
> + Support for the global clock controller on Qualcomm Technologies, Inc
> + sdm845 devices.
> + Say Y if you want to use peripheral devices such as UART, SPI,
> + i2c, USB, UFS, SD/eMMC, PCIe, etc.
> +
> +
Drop the double newline here please.
> config SPMI_PMIC_CLKDIV
> tristate "SPMI PMIC clkdiv Support"
> depends on (COMMON_CLK_QCOM && SPMI) || COMPILE_TEST
> @@ -226,3 +236,4 @@ config SPMI_PMIC_CLKDIV
> Technologies, Inc. SPMI PMIC. It configures the frequency of
> clkdiv outputs of the PMIC. These clocks are typically wired
> through alternate functions on GPIO pins.
> +
Noise?
> diff --git a/drivers/clk/qcom/gcc-sdm845.c b/drivers/clk/qcom/gcc-sdm845.c
> new file mode 100644
> index 0000000..3ffa098
> --- /dev/null
> +++ b/drivers/clk/qcom/gcc-sdm845.c
> @@ -0,0 +1,3619 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2018, The Linux Foundation. All rights reserved.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/bitops.h>
> +#include <linux/err.h>
> +#include <linux/platform_device.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/regmap.h>
> +#include <linux/reset-controller.h>
> +
> +#include <dt-bindings/clock/qcom,gcc-sdm845.h>
> +
> +#include "common.h"
> +#include "clk-regmap.h"
> +#include "clk-pll.h"
> +#include "clk-rcg.h"
> +#include "clk-branch.h"
> +#include "clk-alpha-pll.h"
> +#include "gdsc.h"
> +#include "reset.h"
> +
> +#define F(f, s, h, m, n) { (f), (s), (2 * (h) - 1), (m), (n) }
> +
> +static struct freq_tbl cxo_safe_src_f = {
> + .pre_div = 1,
> +};
Still hoping this goes away.
> +
> +enum {
> + P_BI_TCXO,
> + P_AUD_REF_CLK,
> + P_CORE_BI_PLL_TEST_SE,
> + P_GPLL0_OUT_EVEN,
> + P_GPLL0_OUT_MAIN,
> + P_GPLL4_OUT_MAIN,
> + P_SLEEP_CLK,
> +};
[...]
> + F(400000, P_BI_TCXO, 12, 1, 4),
> + F(9600000, P_BI_TCXO, 2, 0, 0),
> + F(19200000, P_BI_TCXO, 1, 0, 0),
> + F(25000000, P_GPLL0_OUT_MAIN, 12, 1, 2),
> + F(50000000, P_GPLL0_OUT_MAIN, 12, 0, 0),
> + F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0),
> + { }
> +};
> +
> +static struct clk_rcg2 gcc_sdcc4_apps_clk_src = {
> + .cmd_rcgr = 0x1600c,
> + .mnd_width = 8,
> + .hid_width = 5,
> + .parent_map = gcc_parent_map_0,
> + .freq_tbl = ftbl_gcc_sdcc4_apps_clk_src,
> + .safe_src_freq_tbl = &cxo_safe_src_f,
Why does sdcc have safe src stuff? Is something turning on the sdcc clk
outside of our control?
> + .clkr.hw.init = &(struct clk_init_data){
> + .name = "gcc_sdcc4_apps_clk_src",
> + .parent_names = gcc_parent_names_0,
> + .num_parents = 4,
> + .flags = CLK_SET_RATE_PARENT,
> + .ops = &clk_rcg2_shared_ops,
> + },
> +};
> +
[...]
> +
> +static struct clk_branch gcc_video_xo_clk = {
> + .halt_reg = 0xb028,
> + .halt_check = BRANCH_HALT,
> + .clkr = {
> + .enable_reg = 0xb028,
> + .enable_mask = BIT(0),
> + .hw.init = &(struct clk_init_data){
> + .name = "gcc_video_xo_clk",
> + .flags = CLK_IS_CRITICAL,
> + .ops = &clk_branch2_ops,
> +
These things have no parents and we mark them critical. Why are we
even exposing them to the kernel? Are they not on by default? Are we
going to change these to non-critical at some point in the future?
> +static const struct regmap_config gcc_sdm845_regmap_config = {
> + .reg_bits = 32,
> + .reg_stride = 4,
> + .val_bits = 32,
> + .max_register = 0x182090,
Huge! :P
> + .fast_io = true,
> +};
> +
> +static const struct qcom_cc_desc gcc_sdm845_desc = {
> + .config = &gcc_sdm845_regmap_config,
> + .clks = gcc_sdm845_clocks,
> + .num_clks = ARRAY_SIZE(gcc_sdm845_clocks),
> + .resets = gcc_sdm845_resets,
> + .num_resets = ARRAY_SIZE(gcc_sdm845_resets),
> + .gdscs = gcc_sdm845_gdscs,
> + .num_gdscs = ARRAY_SIZE(gcc_sdm845_gdscs),
> +};
> +
> +static const struct of_device_id gcc_sdm845_match_table[] = {
> + { .compatible = "qcom,gcc-sdm845" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, gcc_sdm845_match_table);
> +
> +static int gcc_sdm845_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct regmap *regmap;
> + int i, ret;
> +
> + regmap = qcom_cc_map(pdev, &gcc_sdm845_desc);
> + if (IS_ERR(regmap))
> + return PTR_ERR(regmap);
> +
> + for (i = 0; i < ARRAY_SIZE(gcc_sdm845_hws); i++) {
> + ret = devm_clk_hw_register(dev, gcc_sdm845_hws[i]);
> + if (ret)
> + return ret;
> + }
> +
> + /* Get the rate for safe source */
> + cxo_safe_src_f.freq = clk_get_rate(bi_tcxo.hw.clk);
Hopefully this can be dropped too.
> +
> + /* Disable the GPLL0 active input to MMSS and GPU via MISC registers */
> + regmap_update_bits(regmap, 0x09FFC, 0x3, 0x3);
> + regmap_update_bits(regmap, 0x71028, 0x3, 0x3);
Lowercase hex please.
> +
> + return qcom_cc_really_probe(pdev, &gcc_sdm845_desc, regmap);
> +}
Powered by blists - more mailing lists