| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <2e10d950dacfe1a079d69ec0ad5276b2@codeaurora.org>
Date: Tue, 20 Mar 2018 19:18:20 +0800
From: cang@...eaurora.org
To: Vivek Gautam <vivek.gautam@...eaurora.org>
Cc: subhashj@...eaurora.org, asutoshd@...eaurora.org,
mgautam@...eaurora.org, kishon@...com, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v1] phy: Add QMP phy based UFS phy support for sdm845.
On 2018-03-20 18:07, Vivek Gautam wrote:
> Hi Can,
>
>
> On 3/20/2018 1:13 PM, Can Guo wrote:
>> Add UFS PHY support to make SDM845 UFS work with common PHY framework.
>>
>> Signed-off-by: Can Guo <cang@...eaurora.org>
>> ---
>
> Thanks for the patch.
> Can you please include the dt binding documentation in this patch
> series and may be base it on Manu's patch for dt binding doc [1].
> Please create a separate patch for binding documentation.
>
> [1]
> http://lists-archives.com/linux-kernel/29071659-dt-bindings-phy-qcom-qmp-update-bindings-for-sdm845.html
>
> Thanks
> Vivek
>
Thank you Vivek, shall re-send the patch with the dt bindings change as
a patch series for you to review.
>> drivers/phy/qualcomm/phy-qcom-qmp.c | 120
>> +++++++++++++++++++++++++++++++++++-
>> drivers/phy/qualcomm/phy-qcom-qmp.h | 8 +++
>> 2 files changed, 126 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c
>> b/drivers/phy/qualcomm/phy-qcom-qmp.c
>> index 6470c5d..aeb2377 100644
>> --- a/drivers/phy/qualcomm/phy-qcom-qmp.c
>> +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
>> @@ -156,6 +156,11 @@ enum qphy_reg_layout {
>> [QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x170,
>> };
>> +static const unsigned int sdm845_ufsphy_regs_layout[] = {
>> + [QPHY_START_CTRL] = 0x00,
>> + [QPHY_PCS_READY_STATUS] = 0x168,
>> +};
>> +
>> static const struct qmp_phy_init_tbl msm8996_pcie_serdes_tbl[] = {
>> QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x1c),
>> QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
>> @@ -490,6 +495,74 @@ enum qphy_reg_layout {
>> QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
>> };
>> +static const struct qmp_phy_init_tbl sdm845_ufsphy_serdes_tbl[] = {
>> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x0f),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0xd5),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_CTRL, 0x00),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x04),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x05),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL1, 0xff),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL2, 0x00),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xda),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0xff),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0c),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE1, 0x98),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE1, 0x06),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE1, 0x16),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE1, 0x36),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE1, 0x3f),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE1, 0xc1),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE1, 0x00),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE1, 0x32),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE1, 0x0f),
>> +
>> + /* Rate B */
>> + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x44),
>> +};
>> +
>> +static const struct qmp_phy_init_tbl sdm845_ufsphy_tx_tbl[] = {
>> + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06),
>> +};
>> +
>> +static const struct qmp_phy_init_tbl sdm845_ufsphy_rx_tbl[] = {
>> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_LVL, 0x24),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x0f),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_TERM_BW, 0x5b),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1d),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF, 0x04),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_QUARTER, 0x04),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN, 0x04),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x81),
>> + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
>> +};
>> +
>> +static const struct qmp_phy_init_tbl sdm845_ufsphy_pcs_tbl[] = {
>> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_DOWN_CONTROL, 0x01),
>> + QMP_PHY_INIT_CFG(QPHY_V3_PCS_MULTI_LANE_CTRL1, 0x02),
>> +};
>> +
>> /* struct qmp_phy_cfg - per-PHY initialization config */
>> struct qmp_phy_cfg {
>> /* phy-type - PCIE/UFS/USB */
>> @@ -540,6 +613,9 @@ struct qmp_phy_cfg {
>> /* Register offset of secondary tx/rx lanes for USB DP combo PHY */
>> unsigned int tx_b_lane_offset;
>> unsigned int rx_b_lane_offset;
>> +
>> + /* true, if PCS block has a separate SW_RESET register */
>> + bool has_sw_rst;
>> };
>> /**
>> @@ -636,6 +712,10 @@ static inline void qphy_clrbits(void __iomem
>> *base, u32 offset, u32 val)
>> "aux", "cfg_ahb", "ref", "com_aux",
>> };
>> +static const char * const sdm845_ufs_phy_clk_l[] = {
>> + "ref_clk", "ref_aux_clk",
>> +};
>> +
>> /* list of resets */
>> static const char * const msm8996_pciephy_reset_l[] = {
>> "phy", "common", "cfg",
>> @@ -650,6 +730,10 @@ static inline void qphy_clrbits(void __iomem
>> *base, u32 offset, u32 val)
>> "vdda-phy", "vdda-pll",
>> };
>> +static const char * const sdm845_phy_vreg_l[] = {
>> + "vdda-phy", "vdda-pll",
>> +};
>> +
>> static const struct qmp_phy_cfg msm8996_pciephy_cfg = {
>> .type = PHY_TYPE_PCIE,
>> .nlanes = 3,
>> @@ -679,6 +763,7 @@ static inline void qphy_clrbits(void __iomem
>> *base, u32 offset, u32 val)
>> .has_pwrdn_delay = true,
>> .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
>> .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
>> + .has_sw_rst = true,
>> };
>> static const struct qmp_phy_cfg msm8996_usb3phy_cfg = {
>> @@ -704,6 +789,7 @@ static inline void qphy_clrbits(void __iomem
>> *base, u32 offset, u32 val)
>> .start_ctrl = SERDES_START | PCS_START,
>> .pwrdn_ctrl = SW_PWRDN,
>> .mask_pcs_ready = PHYSTATUS,
>> + .has_sw_rst = true,
>> };
>> /* list of resets */
>> @@ -740,6 +826,7 @@ static inline void qphy_clrbits(void __iomem
>> *base, u32 offset, u32 val)
>> .has_pwrdn_delay = true,
>> .pwrdn_delay_min = 995, /* us */
>> .pwrdn_delay_max = 1005, /* us */
>> + .has_sw_rst = true,
>> };
>> static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = {
>> @@ -772,6 +859,30 @@ static inline void qphy_clrbits(void __iomem
>> *base, u32 offset, u32 val)
>> .has_phy_dp_com_ctrl = true,
>> .tx_b_lane_offset = 0x400,
>> .rx_b_lane_offset = 0x400,
>> + .has_sw_rst = true,
>> +};
>> +
>> +static const struct qmp_phy_cfg sdm845_ufsphy_cfg = {
>> + .type = PHY_TYPE_UFS,
>> + .nlanes = 2,
>> +
>> + .serdes_tbl = sdm845_ufsphy_serdes_tbl,
>> + .serdes_tbl_num = ARRAY_SIZE(sdm845_ufsphy_serdes_tbl),
>> + .tx_tbl = sdm845_ufsphy_tx_tbl,
>> + .tx_tbl_num = ARRAY_SIZE(sdm845_ufsphy_tx_tbl),
>> + .rx_tbl = sdm845_ufsphy_rx_tbl,
>> + .rx_tbl_num = ARRAY_SIZE(sdm845_ufsphy_rx_tbl),
>> + .pcs_tbl = sdm845_ufsphy_pcs_tbl,
>> + .pcs_tbl_num = ARRAY_SIZE(sdm845_ufsphy_pcs_tbl),
>> + .clk_list = sdm845_ufs_phy_clk_l,
>> + .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
>> + .vreg_list = sdm845_phy_vreg_l,
>> + .num_vregs = ARRAY_SIZE(sdm845_phy_vreg_l),
>> + .regs = sdm845_ufsphy_regs_layout,
>> +
>> + .start_ctrl = SERDES_START,
>> + .pwrdn_ctrl = SW_PWRDN,
>> + .mask_pcs_ready = PCS_READY,
>> };
>> static void qcom_qmp_phy_configure(void __iomem *base,
>> @@ -998,7 +1109,8 @@ static int qcom_qmp_phy_init(struct phy *phy)
>> usleep_range(cfg->pwrdn_delay_min, cfg->pwrdn_delay_max);
>> /* Pull PHY out of reset state */
>> - qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
>> + if (cfg->has_sw_rst)
>> + qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
>> if (cfg->has_phy_dp_com_ctrl)
>> qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET);
>> @@ -1036,7 +1148,8 @@ static int qcom_qmp_phy_exit(struct phy *phy)
>> clk_disable_unprepare(qphy->pipe_clk);
>> /* PHY reset */
>> - qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
>> + if (cfg->has_sw_rst)
>> + qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
>> /* stop SerDes and Phy-Coding-Sublayer */
>> qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL],
>> cfg->start_ctrl);
>> @@ -1383,6 +1496,9 @@ int qcom_qmp_phy_create(struct device *dev,
>> struct device_node *np, int id)
>> }, {
>> .compatible = "qcom,qmp-v3-usb3-phy",
>> .data = &qmp_v3_usb3phy_cfg,
>> + }, {
>> + .compatible = "qcom,sdm845-qmp-ufs-phy",
>> + .data = &sdm845_ufsphy_cfg,
>> },
>> { },
>> };
>> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h
>> b/drivers/phy/qualcomm/phy-qcom-qmp.h
>> index d1c6905..ea4b4dc 100644
>> --- a/drivers/phy/qualcomm/phy-qcom-qmp.h
>> +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
>> @@ -184,6 +184,8 @@
>> #define QSERDES_V3_COM_VCO_TUNE2_MODE0 0x0f8
>> #define QSERDES_V3_COM_VCO_TUNE1_MODE1 0x0fc
>> #define QSERDES_V3_COM_VCO_TUNE2_MODE1 0x100
>> +#define QSERDES_V3_COM_VCO_TUNE_INITVAL1 0x104
>> +#define QSERDES_V3_COM_VCO_TUNE_INITVAL2 0x108
>> #define QSERDES_V3_COM_VCO_TUNE_TIMER1 0x11c
>> #define QSERDES_V3_COM_VCO_TUNE_TIMER2 0x120
>> #define QSERDES_V3_COM_CLK_SELECT 0x138
>> @@ -211,8 +213,13 @@
>> /* Only for QMP V3 PHY - RX registers */
>> #define QSERDES_V3_RX_UCDR_SO_GAIN_HALF 0x00c
>> #define QSERDES_V3_RX_UCDR_SO_GAIN 0x014
>> +#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF 0x024
>> +#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN_QUARTER 0x028
>> +#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN 0x02c
>> #define QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN 0x030
>> #define QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE 0x034
>> +#define QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW 0x03c
>> +#define QSERDES_V3_RX_UCDR_PI_CONTROLS 0x044
>> #define QSERDES_V3_RX_RX_TERM_BW 0x07c
>> #define QSERDES_V3_RX_RX_EQ_GAIN2_LSB 0x0c8
>> #define QSERDES_V3_RX_RX_EQ_GAIN2_MSB 0x0cc
>> @@ -272,6 +279,7 @@
>> #define QPHY_V3_PCS_FLL_CNT_VAL_L 0x0cc
>> #define QPHY_V3_PCS_FLL_CNT_VAL_H_TOL 0x0d0
>> #define QPHY_V3_PCS_FLL_MAN_CODE 0x0d4
>> +#define QPHY_V3_PCS_MULTI_LANE_CTRL1 0x1c4
>> #define QPHY_V3_PCS_RX_SIGDET_LVL 0x1d8
>> /* Only for QMP V3 PHY - PCS_MISC registers */
Powered by blists - more mailing lists