| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 21 Mar 2018 06:29:06 -0400
From: Brian Masney <masneyb@...tation.org>
To: jic23@...nel.org, linux-iio@...r.kernel.org
Cc: gregkh@...uxfoundation.org, devel@...verdev.osuosl.org,
knaack.h@....de, lars@...afoo.de, pmeerw@...erw.net,
linux-kernel@...r.kernel.org, Jon.Brenner@....com
Subject: [PATCH 05/11] staging: iio: tsl2x7x: split out als and prox interrupt settings
The struct tsl2x7x_settings contained an interrupts_en member that was
a bitmask for which interrupts are enabled. This required having
bitmasks in several parts of the code. This patch splits this field
out into two booleans to remove most of the bitmasks in the code.
This patch also fixes a bug where if an interrupt pin was configured,
but proximity interrupts were disabled, then the proximity value could
not be polled.
This patch also removes an unnecessary second call to writing the
control register in tsl2x7x_chip_on().
Driver tested using a TSL2772 hooked up to a Raspberry Pi 2.
Signed-off-by: Brian Masney <masneyb@...tation.org>
---
drivers/staging/iio/light/tsl2x7x.c | 64 ++++++++++++-------------------------
drivers/staging/iio/light/tsl2x7x.h | 7 ++--
2 files changed, 24 insertions(+), 47 deletions(-)
diff --git a/drivers/staging/iio/light/tsl2x7x.c b/drivers/staging/iio/light/tsl2x7x.c
index 99230d9313e1..f7e7fcc17059 100644
--- a/drivers/staging/iio/light/tsl2x7x.c
+++ b/drivers/staging/iio/light/tsl2x7x.c
@@ -226,10 +226,11 @@ static const struct tsl2x7x_settings tsl2x7x_default_settings = {
.prox_config = 0,
.als_gain_trim = 1000,
.als_cal_target = 150,
+ .als_interrupt_en = false,
.als_thresh_low = 200,
.als_thresh_high = 256,
.persistence = 255,
- .interrupts_en = 0,
+ .prox_interrupt_en = false,
.prox_thres_low = 0,
.prox_thres_high = 512,
.prox_max_samples_cal = 30,
@@ -686,37 +687,22 @@ static int tsl2x7x_chip_on(struct iio_dev *indio_dev)
/* Power-on settling time */
usleep_range(3000, 3500);
- /*
- * NOW enable the ADC
- * initialize the desired mode of operation
- */
- ret = tsl2x7x_write_control_reg(chip,
- TSL2X7X_CNTL_PWR_ON |
- TSL2X7X_CNTL_ADC_ENBL |
- TSL2X7X_CNTL_PROX_DET_ENBL);
+ reg_val = TSL2X7X_CNTL_PWR_ON | TSL2X7X_CNTL_ADC_ENBL |
+ TSL2X7X_CNTL_PROX_DET_ENBL;
+ if (chip->settings.als_interrupt_en)
+ reg_val |= TSL2X7X_CNTL_ALS_INT_ENBL;
+ if (chip->settings.prox_interrupt_en)
+ reg_val |= TSL2X7X_CNTL_PROX_INT_ENBL;
+
+ ret = tsl2x7x_write_control_reg(chip, reg_val);
if (ret < 0)
return ret;
- chip->tsl2x7x_chip_status = TSL2X7X_CHIP_WORKING;
-
- if (chip->settings.interrupts_en != 0) {
- dev_info(&chip->client->dev, "Setting Up Interrupt(s)\n");
-
- reg_val = TSL2X7X_CNTL_PWR_ON | TSL2X7X_CNTL_ADC_ENBL;
- if (chip->settings.interrupts_en == 0x20 ||
- chip->settings.interrupts_en == 0x30)
- reg_val |= TSL2X7X_CNTL_PROX_DET_ENBL;
-
- reg_val |= chip->settings.interrupts_en;
- ret = tsl2x7x_write_control_reg(chip, reg_val);
- if (ret < 0)
- return ret;
+ ret = tsl2x7x_clear_interrupts(chip, TSL2X7X_CMD_PROXALS_INT_CLR);
+ if (ret < 0)
+ return ret;
- ret = tsl2x7x_clear_interrupts(chip,
- TSL2X7X_CMD_PROXALS_INT_CLR);
- if (ret < 0)
- return ret;
- }
+ chip->tsl2x7x_chip_status = TSL2X7X_CHIP_WORKING;
return ret;
}
@@ -978,14 +964,11 @@ static int tsl2x7x_read_interrupt_config(struct iio_dev *indio_dev,
enum iio_event_direction dir)
{
struct tsl2X7X_chip *chip = iio_priv(indio_dev);
- int ret;
if (chan->type == IIO_INTENSITY)
- ret = !!(chip->settings.interrupts_en & 0x10);
+ return chip->settings.als_interrupt_en;
else
- ret = !!(chip->settings.interrupts_en & 0x20);
-
- return ret;
+ return chip->settings.prox_interrupt_en;
}
static int tsl2x7x_write_interrupt_config(struct iio_dev *indio_dev,
@@ -997,17 +980,10 @@ static int tsl2x7x_write_interrupt_config(struct iio_dev *indio_dev,
struct tsl2X7X_chip *chip = iio_priv(indio_dev);
int ret;
- if (chan->type == IIO_INTENSITY) {
- if (val)
- chip->settings.interrupts_en |= 0x10;
- else
- chip->settings.interrupts_en &= 0x20;
- } else {
- if (val)
- chip->settings.interrupts_en |= 0x20;
- else
- chip->settings.interrupts_en &= 0x10;
- }
+ if (chan->type == IIO_INTENSITY)
+ chip->settings.als_interrupt_en = val ? true : false;
+ else
+ chip->settings.prox_interrupt_en = val ? true : false;
ret = tsl2x7x_invoke_change(indio_dev);
if (ret < 0)
diff --git a/drivers/staging/iio/light/tsl2x7x.h b/drivers/staging/iio/light/tsl2x7x.h
index 28b0e7fdc9b8..b2aa642299b3 100644
--- a/drivers/staging/iio/light/tsl2x7x.h
+++ b/drivers/staging/iio/light/tsl2x7x.h
@@ -50,12 +50,12 @@ struct tsl2x7x_lux {
* @prox_config: Prox configuration filters.
* @als_cal_target: Known external ALS reading for
* calibration.
- * @interrupts_en: Enable/Disable - 0x00 = none, 0x10 = als,
- * 0x20 = prx, 0x30 = bth
* @persistence: H/W Filters, Number of 'out of limits'
* ADC readings PRX/ALS.
+ * @als_interrupt_en: Enable/Disable ALS interrupts
* @als_thresh_low: CH0 'low' count to trigger interrupt.
* @als_thresh_high: CH0 'high' count to trigger interrupt.
+ * @prox_interrupt_en: Enable/Disable proximity interrupts
* @prox_thres_low: Low threshold proximity detection.
* @prox_thres_high: High threshold proximity detection
* @prox_pulse_count: Number if proximity emitter pulses
@@ -70,10 +70,11 @@ struct tsl2x7x_settings {
int prox_gain;
int prox_config;
int als_cal_target;
- u8 interrupts_en;
u8 persistence;
+ bool als_interrupt_en;
int als_thresh_low;
int als_thresh_high;
+ bool prox_interrupt_en;
int prox_thres_low;
int prox_thres_high;
int prox_pulse_count;
--
2.14.3
Powered by blists - more mailing lists