| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1521716075-807-4-git-send-email-shilpa.bhat@linux.vnet.ibm.com>
Date: Thu, 22 Mar 2018 16:24:35 +0530
From: Shilpasri G Bhat <shilpa.bhat@...ux.vnet.ibm.com>
To: mpe@...erman.id.au, linux@...ck-us.net
Cc: linuxppc-dev@...ts.ozlabs.org, linux-hwmon@...r.kernel.org,
linux-kernel@...r.kernel.org, stewart@...ux.vnet.ibm.com,
Shilpasri G Bhat <shilpa.bhat@...ux.vnet.ibm.com>
Subject: [PATCH 3/3] powernv: opal-sensor-groups: Add attributes to disable/enable sensors
This patch provides support to disable and enable plaform specific
sensor groups like performance, utilization and frequency.
Signed-off-by: Shilpasri G Bhat <shilpa.bhat@...ux.vnet.ibm.com>
---
.../ABI/testing/sysfs-firmware-opal-sensor-groups | 34 +++++++++
.../powerpc/platforms/powernv/opal-sensor-groups.c | 80 +++++++++++++---------
2 files changed, 83 insertions(+), 31 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-firmware-opal-sensor-groups
diff --git a/Documentation/ABI/testing/sysfs-firmware-opal-sensor-groups b/Documentation/ABI/testing/sysfs-firmware-opal-sensor-groups
new file mode 100644
index 0000000..484ff1c
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-firmware-opal-sensor-groups
@@ -0,0 +1,34 @@
+What: /sys/firmware/opal/sensor_groups
+Date: March 2018
+Contact: Linux for PowerPC mailing list <linuxppc-dev@...abs.org>
+Description: Sensor groups directory for POWER9 powernv servers
+
+ Each folder in this directory contains a sensor group
+ which are classified based on type of the sensor
+ like power, temperature, frequency, current, etc. They
+ can also indicate the group of sensors belonging to
+ different owners like CSM, Profiler, Job-Scheduler
+
+What: /sys/firmware/opal/sensor_groups/<sensor_group_name>/clear
+Date: March 2018
+Contact: Linux for PowerPC mailing list <linuxppc-dev@...abs.org>
+Description: Sysfs file to clear the min-max of all the sensors
+ belonging to the group.
+
+ Writing 1 to this file will clear the minimum and
+ maximum values of all the sensors in the group. The
+ min-max of a sensor is the historical minimum and
+ maximum value of the sensor cached by OCC.
+
+What: /sys/firmware/opal/sensor_groups/<sensor_group_name>/enable
+Date: March 2018
+Contact: Linux for PowerPC mailing list <linuxppc-dev@...abs.org>
+Description: Sysfs file to enable/disable the sensor-group
+
+ Writing 0 value to this file will disable the copying
+ of the sensor-group to main memory by OCC. And writing
+ 1 to this file will enable the sensor-group copying.
+ By default all the sensor-groups are enabled and will
+ be copied to main memory. This file can be used to
+ increase the update frequency of selective
+ sensor-groups.
diff --git a/arch/powerpc/platforms/powernv/opal-sensor-groups.c b/arch/powerpc/platforms/powernv/opal-sensor-groups.c
index 5b53f58..67f28b2 100644
--- a/arch/powerpc/platforms/powernv/opal-sensor-groups.c
+++ b/arch/powerpc/platforms/powernv/opal-sensor-groups.c
@@ -24,6 +24,7 @@
struct sg_attr {
u32 handle;
struct kobj_attribute attr;
+ u32 opal_no;
};
static struct sensor_group {
@@ -60,34 +61,17 @@ int sensor_group_enable(u32 handle, bool enable)
}
EXPORT_SYMBOL_GPL(sensor_group_enable);
-static ssize_t sg_store(struct kobject *kobj, struct kobj_attribute *attr,
- const char *buf, size_t count)
+static int sensor_group_clear(u32 handle)
{
- struct sg_attr *sattr = container_of(attr, struct sg_attr, attr);
struct opal_msg msg;
- u32 data;
- int ret, token;
-
- ret = kstrtoint(buf, 0, &data);
- if (ret)
- return ret;
-
- if (data != 1)
- return -EINVAL;
+ int token, ret;
token = opal_async_get_token_interruptible();
- if (token < 0) {
- pr_devel("Failed to get token\n");
+ if (token < 0)
return token;
- }
- ret = mutex_lock_interruptible(&sg_mutex);
- if (ret)
- goto out_token;
-
- ret = opal_sensor_group_clear(sattr->handle, token);
- switch (ret) {
- case OPAL_ASYNC_COMPLETION:
+ ret = opal_sensor_group_clear(handle, token);
+ if (ret == OPAL_ASYNC_COMPLETION) {
ret = opal_async_wait_response(token, &msg);
if (ret) {
pr_devel("Failed to wait for the async response\n");
@@ -95,20 +79,48 @@ static ssize_t sg_store(struct kobject *kobj, struct kobj_attribute *attr,
goto out;
}
ret = opal_error_code(opal_get_async_rc(msg));
- if (!ret)
- ret = count;
+ } else {
+ ret = opal_error_code(ret);
+ }
+
+out:
+ opal_async_release_token(token);
+ return ret;
+}
+
+static ssize_t sg_store(struct kobject *kobj, struct kobj_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sg_attr *sattr = container_of(attr, struct sg_attr, attr);
+ u32 data;
+ int ret;
+
+ ret = kstrtoint(buf, 0, &data);
+ if (ret)
+ return ret;
+
+ ret = mutex_lock_interruptible(&sg_mutex);
+ if (ret)
+ return ret;
+
+ ret = -EINVAL;
+ switch (sattr->opal_no) {
+ case OPAL_SENSOR_GROUP_CLEAR:
+ if (data == 1)
+ ret = sensor_group_clear(sattr->handle);
break;
- case OPAL_SUCCESS:
- ret = count;
+ case OPAL_SENSOR_GROUP_ENABLE:
+ if (data == 0 || data == 1)
+ ret = sensor_group_enable(sattr->handle, data);
break;
default:
- ret = opal_error_code(ret);
+ break;
}
-out:
+ if (!ret)
+ ret = count;
+
mutex_unlock(&sg_mutex);
-out_token:
- opal_async_release_token(token);
return ret;
}
@@ -118,12 +130,14 @@ static ssize_t sg_store(struct kobject *kobj, struct kobj_attribute *attr,
ssize_t (*store)(struct kobject *kobj, struct kobj_attribute *attr,
const char *buf, size_t count);
} ops_info[] = {
- { OPAL_SENSOR_GROUP_CLEAR, "clear", sg_store },
+ { OPAL_SENSOR_GROUP_CLEAR, "clear", sg_store},
+ { OPAL_SENSOR_GROUP_ENABLE, "enable", sg_store},
};
static void add_attr(int handle, struct sg_attr *attr, int index)
{
attr->handle = handle;
+ attr->opal_no = ops_info[index].opal_no;
sysfs_attr_init(&attr->attr.attr);
attr->attr.attr.name = ops_info[index].attr_name;
attr->attr.attr.mode = 0220;
@@ -186,6 +200,10 @@ void __init opal_sensor_groups_init(void)
const __be32 *ops;
u32 sgid, len, nr_attrs, chipid;
+ /* Skip sensor groups that are handled in HWMON */
+ if (of_device_is_compatible(node, "ibm,opal-sensor"))
+ continue;
+
ops = of_get_property(node, "ops", &len);
if (!ops)
continue;
--
1.8.3.1
Powered by blists - more mailing lists