[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAMuHMdUbSfQAf9cRAiLg3ZuVwdSoAGOFwiqyv-28SW5d0fOr3w@mail.gmail.com>
Date: Thu, 22 Mar 2018 13:48:14 +0100
From: Geert Uytterhoeven <geert@...ux-m68k.org>
To: Michel Pollet <michel.pollet@...renesas.com>
Cc: Linux-Renesas <linux-renesas-soc@...r.kernel.org>,
Simon Horman <horms@...ge.net.au>,
Phil Edworthy <phil.edworthy@...esas.com>,
Magnus Damm <magnus.damm@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Lee Jones <lee.jones@...aro.org>,
Russell King <linux@...linux.org.uk>,
Sebastian Reichel <sre@...nel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Linux ARM <linux-arm-kernel@...ts.infradead.org>,
Linux PM list <linux-pm@...r.kernel.org>
Subject: Re: [PATCH v2 4/8] reset: Renesas RZ/N1 reboot driver
Hi Michel,
On Thu, Mar 22, 2018 at 12:44 PM, Michel Pollet
<michel.pollet@...renesas.com> wrote:
> The Renesas RZ/N1 Family (Part #R9A06G0xx) needs a small driver
> to reboot the Cortex-A7 cores. This driver is a sub driver of
> the sysctrl MFD.
>
> Signed-off-by: Michel Pollet <michel.pollet@...renesas.com>
Thanks for your patch!
> --- /dev/null
> +++ b/drivers/power/reset/rzn1-reboot.c
> @@ -0,0 +1,109 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * RZ/N1 reboot driver
> + *
> + * Copyright (C) 2018 Renesas Electronics Europe Limited
> + *
> + * Michel Pollet <michel.pollet@...renesas.com>, <buserror@...il.com>
> + * Derived from zx-reboot.c
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/notifier.h>
> +#include <linux/of_address.h>
I don't think you need <linux/of_address.h>.
> +#include <linux/platform_device.h>
> +#include <linux/reboot.h>
> +#include <linux/regmap.h>
> +
> +/* Definitions from the SDK rzn1-sysctrl.h autogenerated file */
> +#define RZN1_SYSCTRL_REG_RSTEN 0x120
> +#define RZN1_SYSCTRL_REG_RSTEN_MRESET_EN 0
> +#define RZN1_SYSCTRL_REG_RSTEN_WDA7RST_EN 1
> +#define RZN1_SYSCTRL_REG_RSTEN_WDA7RST_EN_MASK 0x6
> +#define RZN1_SYSCTRL_REG_RSTEN_WDM3RST_EN 3
> +#define RZN1_SYSCTRL_REG_RSTEN_CM3LOCKUPRST_EN 4
> +#define RZN1_SYSCTRL_REG_RSTEN_CM3SYSRESET_EN 5
> +#define RZN1_SYSCTRL_REG_RSTEN_SWRST_EN 6
> +#define RZN1_SYSCTRL_REG_RSTCTRL 0x198
> +#define RZN1_SYSCTRL_REG_RSTCTRL_WDA7RST_REQ 1
> +#define RZN1_SYSCTRL_REG_RSTCTRL_WDA7RST_REQ_MASK 0x6
> +#define RZN1_SYSCTRL_REG_RSTCTRL_WDM3RST_REQ 3
> +#define RZN1_SYSCTRL_REG_RSTCTRL_CM3LOCKUPRST_REQ 4
> +#define RZN1_SYSCTRL_REG_RSTCTRL_CM3SYSRESET_REQ 5
> +#define RZN1_SYSCTRL_REG_RSTCTRL_SWRST_REQ 6
> +
> +
> +static struct regmap *_sysctrl;
Variable names starting with an underscore are frowned upon.
> +static int rzn1_reboot_probe(struct platform_device *pdev)
> +{
> + int err;
> + struct device *parent;
> +
> + parent = pdev->dev.parent;
> + if (parent && parent->of_node) {
> + _sysctrl = syscon_node_to_regmap(parent->of_node);
> + } else {
> + dev_err(&pdev->dev, "couldn't find sysctrl node\n");
> + return -ENODEV;
> + }
if (!parent || !parent->of_node) {
dev_err(&pdev->dev, "couldn't find sysctrl node\n");
return -ENODEV;
}
_sysctrl = syscon_node_to_regmap(parent->of_node);
> + if (IS_ERR(_sysctrl)) {
> + dev_err(&pdev->dev, "couldn't find find regmap\n");
> + return PTR_ERR(_sysctrl);
> + }
> + err = register_restart_handler(&rzn1_reboot_nb);
> + if (err) {
> + dev_err(&pdev->dev, "register restart handler failed(err=%d)\n",
> + err);
> + }
> +
> + return err;
> +}
> +
> +static const struct of_device_id rzn1_reboot_of_match[] = {
> + { .compatible = "renesas,r9a06g032-reboot" },
> + { .compatible = "renesas,rzn1-reboot" },
Matching against the second (family-specific) compatible value should
be sufficient.
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, rzn1_reboot_of_match);
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@...ux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Powered by blists - more mailing lists