[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1521785487-29866-1-git-send-email-mgautam@codeaurora.org>
Date: Fri, 23 Mar 2018 11:41:21 +0530
From: Manu Gautam <mgautam@...eaurora.org>
To: Kishon Vijay Abraham I <kishon@...com>
Cc: linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
Rob Herring <robh+dt@...nel.org>,
linux-arm-msm@...r.kernel.org, Manu Gautam <mgautam@...eaurora.org>
Subject: [PATCH v3 0/6] phy: qcom: Updates for USB PHYs on SDM845
SDM845 has two USB instances each with QUSB2 and QMP PHYs.
One of the QMP PHY is USB-DP (DisplayPort) combo PHY where
as other one is single lane UNI-PHY (without DP support).
Changes are related to PHY configuration for electrical
parameters tuning to improve eye-diagram and some fixes.
Changes since v2:
- Use separate phy_ops for USB to not register power_on op.
- And other minor changes as per review comments from Stephen.
Changes since v1:
- Updated qusb2 compatibility name as per comment from Vivek.
Manu Gautam (6):
phy: qcom-qmp: Enable pipe_clk before checking USB3 PHY_STATUS
phy: qcom-qusb2: Fix crash if nvmem cell not specified
dt-bindings: phy-qcom-qmp: Update bindings for sdm845
phy: qcom-qmp: Add QMP V3 USB3 UNI PHY support for sdm845
dt-bindings: phy-qcom-usb2: Update bindings for sdm845
phy: qcom-qusb2: Add QUSB2 PHYs support for sdm845
.../devicetree/bindings/phy/qcom-qmp-phy.txt | 4 +-
.../devicetree/bindings/phy/qcom-qusb2-phy.txt | 4 +-
drivers/phy/qualcomm/phy-qcom-qmp.c | 181 ++++++++++++++++++++-
drivers/phy/qualcomm/phy-qcom-qmp.h | 5 +
drivers/phy/qualcomm/phy-qcom-qusb2.c | 43 +++++
5 files changed, 234 insertions(+), 3 deletions(-)
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
Powered by blists - more mailing lists