[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5e34fe67466d09ad5ce15e913dbe371eeb0a250f.1521794177.git.sean.wang@mediatek.com>
Date: Fri, 23 Mar 2018 17:15:04 +0800
From: <sean.wang@...iatek.com>
To: <robh+dt@...nel.org>, <mark.rutland@....com>, <sre@...nel.org>,
<lee.jones@...aro.org>, <a.zummo@...ertech.it>,
<alexandre.belloni@...e-electrons.com>, <eddie.huang@...iatek.com>
CC: <devicetree@...r.kernel.org>, <linux-rtc@...r.kernel.org>,
<linux-pm@...r.kernel.org>, <linux-mediatek@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, Sean Wang <sean.wang@...iatek.com>
Subject: [PATCH v1 07/16] rtc: mediatek: replace a poll with regmap_read_poll_timeout
From: Sean Wang <sean.wang@...iatek.com>
Reuse the helper regmap_read_poll_timeout instead to simpify the logic.
Furthermore, the time for a wait in each iteration changed from cpu_relax
to 20us is for matching the usage of the helper, but it wouldn't acctually
break any the existent functionality according to a good test on MT6323
PMIC.
Signed-off-by: Sean Wang <sean.wang@...iatek.com>
---
drivers/rtc/rtc-mt6397.c | 25 +++++++++++--------------
1 file changed, 11 insertions(+), 14 deletions(-)
diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
index 4411c08..b62eaa8 100644
--- a/drivers/rtc/rtc-mt6397.c
+++ b/drivers/rtc/rtc-mt6397.c
@@ -18,6 +18,7 @@
#include <linux/regmap.h>
#include <linux/rtc.h>
#include <linux/irqdomain.h>
+#include <linux/jiffies.h>
#include <linux/platform_device.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
@@ -63,6 +64,9 @@
#define RTC_NUM_YEARS 128
#define RTC_MIN_YEAR_OFFSET (RTC_MIN_YEAR - RTC_BASE_YEAR)
+#define MTK_RTC_POLL_DELAY_US 10
+#define MTK_RTC_POLL_TIMEOUT (jiffies_to_usecs(HZ))
+
struct mt6397_rtc {
struct device *dev;
struct rtc_device *rtc_dev;
@@ -74,7 +78,6 @@ struct mt6397_rtc {
static int mtk_rtc_write_trigger(struct mt6397_rtc *rtc)
{
- unsigned long timeout = jiffies + HZ;
int ret;
u32 data;
@@ -82,19 +85,13 @@ static int mtk_rtc_write_trigger(struct mt6397_rtc *rtc)
if (ret < 0)
return ret;
- while (1) {
- ret = regmap_read(rtc->regmap, rtc->addr_base + RTC_BBPU,
- &data);
- if (ret < 0)
- break;
- if (!(data & RTC_BBPU_CBUSY))
- break;
- if (time_after(jiffies, timeout)) {
- ret = -ETIMEDOUT;
- break;
- }
- cpu_relax();
- }
+ ret = regmap_read_poll_timeout(rtc->regmap,
+ rtc->addr_base + RTC_BBPU, data,
+ !(data & RTC_BBPU_CBUSY),
+ MTK_RTC_POLL_DELAY_US,
+ MTK_RTC_POLL_TIMEOUT);
+ if (ret)
+ dev_err(rtc->dev, "failed to write WRTGE: %d\n", ret);
return ret;
}
--
2.7.4
Powered by blists - more mailing lists