linux-kernel - [PATCH] cpufreq: cppc: Use transition_delay_us depending on the transition

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1521801031-158659-1-git-send-email-george.cherian@cavium.com>
Date:   Fri, 23 Mar 2018 03:30:31 -0700
From:   George Cherian <george.cherian@...ium.com>
To:     linux-pm@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:     viresh.kumar@...aro.org, rjw@...ysocki.net,
        George Cherian <george.cherian@...ium.com>
Subject: [PATCH] cpufreq: cppc: Use transition_delay_us depending on the transition_latency

With commit e948bc8fbee0 ("cpufreq: Cap the default transition delay
value to 10 ms")  the cpufreq was not honouring the delay passed via
ACPI (PCCT). Due to which on ARM based platforms using CPPC the cpufreq
governor tries to change the frequency of CPU faster than expeted.

This leads to continuous error messages like the following.
" ACPI CPPC: PCC check channel failed. Status=0 "

Earlier (without above commit) the default transition delay was
taken form the value passed from PCCT. Use the same value provided by PCCT
to set the transition_delay_us.

Fixes: e948bc8fbee0 (cpufreq: Cap the default transition delay value to 10 ms)
Signed-off-by: George Cherian <george.cherian@...ium.com>
---
 drivers/cpufreq/cppc_cpufreq.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/cpufreq/cppc_cpufreq.c b/drivers/cpufreq/cppc_cpufreq.c
index a1c3025..dcb1cb9 100644
--- a/drivers/cpufreq/cppc_cpufreq.c
+++ b/drivers/cpufreq/cppc_cpufreq.c
@@ -20,6 +20,7 @@
 #include <linux/cpu.h>
 #include <linux/cpufreq.h>
 #include <linux/dmi.h>
+#include <linux/time.h>
 #include <linux/vmalloc.h>
 
 #include <asm/unaligned.h>
@@ -162,6 +163,8 @@ static int cppc_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	policy->cpuinfo.max_freq = cppc_dmi_max_khz;
 
 	policy->cpuinfo.transition_latency = cppc_get_transition_latency(cpu_num);
+	policy->transition_delay_us = cppc_get_transition_latency(cpu_num) /
+		NSEC_PER_USEC;
 	policy->shared_type = cpu->shared_type;
 
 	if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY)
-- 
1.8.3.1