| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1522094884-22718-4-git-send-email-tianyang.chen@oracle.com>
Date: Mon, 26 Mar 2018 13:08:03 -0700
From: Tim Tianyang Chen <tianyang.chen@...cle.com>
To: rostedt@...dmis.org
Cc: linux-kernel@...r.kernel.org, dhaval.giani@...cle.com
Subject: [PATCH v3 3/4] Ktest: use dodie for critical falures
Users should get emails when the script dies because of a critical failure. Critical
failures are defined as any errors that could abnormally terminate the script.
In order to add email support, this patch converts all die() to dodie() except:
* when '-v' is used as an option to get the version of the script.
* in Sig-Int handeler because it's not a fatal error to cancel the script.
* errors happen during parsing config
Suggested-by: Dhaval Giani <dhaval.giani@...cle.com>
Signed-off-by: Tim Tianyang Chen <tianyang.chen@...cle.com>
---
Changes since v2:
revert a change for opening and appending the config file
Changes since v1:
revert changes for errors happen during config parsing
---
ktest.pl | 54 +++++++++++++++++++++++++++---------------------------
1 file changed, 27 insertions(+), 27 deletions(-)
diff --git a/ktest.pl b/ktest.pl
index 8be12ee27d34..03514a06844c 100755
--- a/ktest.pl
+++ b/ktest.pl
@@ -1502,7 +1502,7 @@ sub exec_console {
close($pts);
exec $console or
- die "Can't open console $console";
+ dodie "Can't open console $console";
}
sub open_console {
@@ -1650,7 +1650,7 @@ sub save_logs {
if (!-d $dir) {
mkpath($dir) or
- die "can't create $dir";
+ dodie "can't create $dir";
}
my %files = (
@@ -1663,7 +1663,7 @@ sub save_logs {
while (my ($name, $source) = each(%files)) {
if (-f "$source") {
cp "$source", "$dir/$name" or
- die "failed to copy $source";
+ dodie "failed to copy $source";
}
}
@@ -1837,7 +1837,7 @@ sub get_grub2_index {
$ssh_grub =~ s,\$SSH_COMMAND,cat $grub_file,g;
open(IN, "$ssh_grub |")
- or die "unable to get $grub_file";
+ or dodie "unable to get $grub_file";
my $found = 0;
@@ -1852,7 +1852,7 @@ sub get_grub2_index {
}
close(IN);
- die "Could not find '$grub_menu' in $grub_file on $machine"
+ dodie "Could not find '$grub_menu' in $grub_file on $machine"
if (!$found);
doprint "$grub_number\n";
$last_grub_menu = $grub_menu;
@@ -1880,7 +1880,7 @@ sub get_grub_index {
$ssh_grub =~ s,\$SSH_COMMAND,cat /boot/grub/menu.lst,g;
open(IN, "$ssh_grub |")
- or die "unable to get menu.lst";
+ or dodie "unable to get menu.lst";
my $found = 0;
@@ -1895,7 +1895,7 @@ sub get_grub_index {
}
close(IN);
- die "Could not find '$grub_menu' in /boot/grub/menu on $machine"
+ dodie "Could not find '$grub_menu' in /boot/grub/menu on $machine"
if (!$found);
doprint "$grub_number\n";
$last_grub_menu = $grub_menu;
@@ -2008,7 +2008,7 @@ sub monitor {
my $full_line = "";
open(DMESG, "> $dmesg") or
- die "unable to write to $dmesg";
+ dodie "unable to write to $dmesg";
reboot_to;
@@ -2887,7 +2887,7 @@ sub run_bisect {
sub update_bisect_replay {
my $tmp_log = "$tmpdir/ktest_bisect_log";
run_command "git bisect log > $tmp_log" or
- die "can't create bisect log";
+ dodie "can't create bisect log";
return $tmp_log;
}
@@ -2896,9 +2896,9 @@ sub bisect {
my $result;
- die "BISECT_GOOD[$i] not defined\n" if (!defined($bisect_good));
- die "BISECT_BAD[$i] not defined\n" if (!defined($bisect_bad));
- die "BISECT_TYPE[$i] not defined\n" if (!defined($bisect_type));
+ dodie "BISECT_GOOD[$i] not defined\n" if (!defined($bisect_good));
+ dodie "BISECT_BAD[$i] not defined\n" if (!defined($bisect_bad));
+ dodie "BISECT_TYPE[$i] not defined\n" if (!defined($bisect_type));
my $good = $bisect_good;
my $bad = $bisect_bad;
@@ -2961,7 +2961,7 @@ sub bisect {
if ($check ne "good") {
doprint "TESTING BISECT BAD [$bad]\n";
run_command "git checkout $bad" or
- die "Failed to checkout $bad";
+ dodie "Failed to checkout $bad";
$result = run_bisect $type;
@@ -2973,7 +2973,7 @@ sub bisect {
if ($check ne "bad") {
doprint "TESTING BISECT GOOD [$good]\n";
run_command "git checkout $good" or
- die "Failed to checkout $good";
+ dodie "Failed to checkout $good";
$result = run_bisect $type;
@@ -2984,7 +2984,7 @@ sub bisect {
# checkout where we started
run_command "git checkout $head" or
- die "Failed to checkout $head";
+ dodie "Failed to checkout $head";
}
run_command "git bisect start$start_files" or
@@ -3441,9 +3441,9 @@ sub patchcheck_reboot {
sub patchcheck {
my ($i) = @_;
- die "PATCHCHECK_START[$i] not defined\n"
+ dodie "PATCHCHECK_START[$i] not defined\n"
if (!defined($patchcheck_start));
- die "PATCHCHECK_TYPE[$i] not defined\n"
+ dodie "PATCHCHECK_TYPE[$i] not defined\n"
if (!defined($patchcheck_type));
my $start = $patchcheck_start;
@@ -3457,7 +3457,7 @@ sub patchcheck {
if (defined($patchcheck_end)) {
$end = $patchcheck_end;
} elsif ($cherry) {
- die "PATCHCHECK_END must be defined with PATCHCHECK_CHERRY\n";
+ dodie "PATCHCHECK_END must be defined with PATCHCHECK_CHERRY\n";
}
# Get the true sha1's since we can use things like HEAD~3
@@ -3521,7 +3521,7 @@ sub patchcheck {
doprint "\nProcessing commit \"$item\"\n\n";
run_command "git checkout $sha1" or
- die "Failed to checkout $sha1";
+ dodie "Failed to checkout $sha1";
# only clean on the first and last patch
if ($item eq $list[0] ||
@@ -3612,7 +3612,7 @@ sub read_kconfig {
}
open(KIN, "$kconfig")
- or die "Can't open $kconfig";
+ or dodie "Can't open $kconfig";
while (<KIN>) {
chomp;
@@ -3773,7 +3773,7 @@ sub get_depends {
$dep =~ s/^[^$valid]*[$valid]+//;
} else {
- die "this should never happen";
+ dodie "this should never happen";
}
}
@@ -4034,7 +4034,7 @@ sub make_min_config {
# update new ignore configs
if (defined($ignore_config)) {
open (OUT, ">$temp_config")
- or die "Can't write to $temp_config";
+ or dodie "Can't write to $temp_config";
foreach my $config (keys %save_configs) {
print OUT "$save_configs{$config}\n";
}
@@ -4062,7 +4062,7 @@ sub make_min_config {
# Save off all the current mandatory configs
open (OUT, ">$temp_config")
- or die "Can't write to $temp_config";
+ or dodie "Can't write to $temp_config";
foreach my $config (keys %keep_configs) {
print OUT "$keep_configs{$config}\n";
}
@@ -4302,11 +4302,11 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
$outputdir = set_test_option("OUTPUT_DIR", $i);
$builddir = set_test_option("BUILD_DIR", $i);
- chdir $builddir || die "can't change directory to $builddir";
+ chdir $builddir || dodie "can't change directory to $builddir";
if (!-d $outputdir) {
mkpath($outputdir) or
- die "can't create $outputdir";
+ dodie "can't create $outputdir";
}
$make = "$makecmd O=$outputdir";
@@ -4343,7 +4343,7 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
if (!-d $tmpdir) {
mkpath($tmpdir) or
- die "can't create $tmpdir";
+ dodie "can't create $tmpdir";
}
$ENV{"SSH_USER"} = $ssh_user;
@@ -4416,7 +4416,7 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
if (defined($checkout)) {
run_command "git checkout $checkout" or
- die "failed to checkout $checkout";
+ dodie "failed to checkout $checkout";
}
$no_reboot = 0;
--
2.15.1
Powered by blists - more mailing lists