| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20180327174621.GO1403@tuxbook-pro>
Date: Tue, 27 Mar 2018 10:46:21 -0700
From: Bjorn Andersson <bjorn.andersson@...aro.org>
To: Sricharan R <sricharan@...eaurora.org>
Cc: robh+dt@...nel.org, robh@...nel.org, mark.rutland@....com,
linux@...linux.org.uk, andy.gross@...aro.org,
david.brown@...aro.org, catalin.marinas@....com,
will.deacon@....com, sboyd@...eaurora.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-arm-msm@...r.kernel.org, linux-soc@...r.kernel.org,
absahu@...eaurora.org, marc.zyngier@....com,
richardcochran@...il.com
Subject: Re: [PATCH v5 12/13] ARM: dts: ipq8074: Add pcie nodes
On Fri 23 Mar 03:18 PDT 2018, Sricharan R wrote:
> The driver/phy support for ipq8074 is available now.
> So enabling the nodes in DT.
>
Acked-by: Bjorn Andersson <bjorn.andersson@...aro.org>
Regards,
Bjorn
> Reviewed-by: Abhishek Sahu <absahu@...eaurora.org>
> Signed-off-by: Sricharan R <sricharan@...eaurora.org>
> ---
> arch/arm64/boot/dts/qcom/ipq8074.dtsi | 157 +++++++++++++++++++++++++++++++++-
> 1 file changed, 156 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> index a8dbbf0..caf3485 100644
> --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> @@ -24,7 +24,7 @@
> ranges = <0 0 0 0xffffffff>;
> compatible = "simple-bus";
>
> - pinctrl@...0000 {
> + tlmm: pinctrl@...0000 {
> compatible = "qcom,ipq8074-pinctrl";
> reg = <0x1000000 0x300000>;
> interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> @@ -229,6 +229,161 @@
> dma-names = "tx", "rx", "cmd";
> status = "disabled";
> };
> +
> + pcie_phy0: phy@...00 {
> + compatible = "qcom,ipq8074-qmp-pcie-phy";
> + reg = <0x86000 0x1000>;
> + #phy-cells = <0>;
> + clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
> + clock-names = "pipe_clk";
> + clock-output-names = "pcie20_phy0_pipe_clk";
> +
> + resets = <&gcc GCC_PCIE0_PHY_BCR>,
> + <&gcc GCC_PCIE0PHY_PHY_BCR>;
> + reset-names = "phy",
> + "common";
> + status = "disabled";
> + };
> +
> + pcie0: pci@...00000 {
> + compatible = "qcom,pcie-ipq8074";
> + reg = <0x20000000 0xf1d
> + 0x20000f20 0xa8
> + 0x80000 0x2000
> + 0x20100000 0x1000>;
> + reg-names = "dbi", "elbi", "parf", "config";
> + device_type = "pci";
> + linux,pci-domain = <0>;
> + bus-range = <0x00 0xff>;
> + num-lanes = <1>;
> + #address-cells = <3>;
> + #size-cells = <2>;
> +
> + phys = <&pcie_phy0>;
> + phy-names = "pciephy";
> +
> + ranges = <0x81000000 0 0x20200000 0x20200000
> + 0 0x100000 /* downstream I/O */
> + 0x82000000 0 0x20300000 0x20300000
> + 0 0xd00000>; /* non-prefetchable memory */
> +
> + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "msi";
> + #interrupt-cells = <1>;
> + interrupt-map-mask = <0 0 0 0x7>;
> + interrupt-map = <0 0 0 1 &intc 0 75
> + IRQ_TYPE_LEVEL_HIGH>, /* int_a */
> + <0 0 0 2 &intc 0 78
> + IRQ_TYPE_LEVEL_HIGH>, /* int_b */
> + <0 0 0 3 &intc 0 79
> + IRQ_TYPE_LEVEL_HIGH>, /* int_c */
> + <0 0 0 4 &intc 0 83
> + IRQ_TYPE_LEVEL_HIGH>; /* int_d */
> +
> + clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
> + <&gcc GCC_PCIE0_AXI_M_CLK>,
> + <&gcc GCC_PCIE0_AXI_S_CLK>,
> + <&gcc GCC_PCIE0_AHB_CLK>,
> + <&gcc GCC_PCIE0_AUX_CLK>;
> +
> + clock-names = "iface",
> + "axi_m",
> + "axi_s",
> + "ahb",
> + "aux";
> + resets = <&gcc GCC_PCIE0_PIPE_ARES>,
> + <&gcc GCC_PCIE0_SLEEP_ARES>,
> + <&gcc GCC_PCIE0_CORE_STICKY_ARES>,
> + <&gcc GCC_PCIE0_AXI_MASTER_ARES>,
> + <&gcc GCC_PCIE0_AXI_SLAVE_ARES>,
> + <&gcc GCC_PCIE0_AHB_ARES>,
> + <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>;
> + reset-names = "pipe",
> + "sleep",
> + "sticky",
> + "axi_m",
> + "axi_s",
> + "ahb",
> + "axi_m_sticky";
> + status = "disabled";
> + };
> +
> + pcie_phy1: phy@...00 {
> + compatible = "qcom,ipq8074-qmp-pcie-phy";
> + reg = <0x8e000 0x1000>;
> + #phy-cells = <0>;
> + clocks = <&gcc GCC_PCIE1_PIPE_CLK>;
> + clock-names = "pipe_clk";
> + clock-output-names = "pcie20_phy1_pipe_clk";
> +
> + resets = <&gcc GCC_PCIE1_PHY_BCR>,
> + <&gcc GCC_PCIE1PHY_PHY_BCR>;
> + reset-names = "phy",
> + "common";
> + status = "disabled";
> + };
> +
> + pcie1: pci@...00000 {
> + compatible = "qcom,pcie-ipq8074";
> + reg = <0x10000000 0xf1d
> + 0x10000f20 0xa8
> + 0x88000 0x2000
> + 0x10100000 0x1000>;
> + reg-names = "dbi", "elbi", "parf", "config";
> + device_type = "pci";
> + linux,pci-domain = <1>;
> + bus-range = <0x00 0xff>;
> + num-lanes = <1>;
> + #address-cells = <3>;
> + #size-cells = <2>;
> +
> + phys = <&pcie_phy1>;
> + phy-names = "pciephy";
> +
> + ranges = <0x81000000 0 0x10200000 0x10200000
> + 0 0x100000 /* downstream I/O */
> + 0x82000000 0 0x10300000 0x10300000
> + 0 0xd00000>; /* non-prefetchable memory */
> +
> + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "msi";
> + #interrupt-cells = <1>;
> + interrupt-map-mask = <0 0 0 0x7>;
> + interrupt-map = <0 0 0 1 &intc 0 142
> + IRQ_TYPE_LEVEL_HIGH>, /* int_a */
> + <0 0 0 2 &intc 0 143
> + IRQ_TYPE_LEVEL_HIGH>, /* int_b */
> + <0 0 0 3 &intc 0 144
> + IRQ_TYPE_LEVEL_HIGH>, /* int_c */
> + <0 0 0 4 &intc 0 145
> + IRQ_TYPE_LEVEL_HIGH>; /* int_d */
> +
> + clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>,
> + <&gcc GCC_PCIE1_AXI_M_CLK>,
> + <&gcc GCC_PCIE1_AXI_S_CLK>,
> + <&gcc GCC_PCIE1_AHB_CLK>,
> + <&gcc GCC_PCIE1_AUX_CLK>;
> + clock-names = "iface",
> + "axi_m",
> + "axi_s",
> + "ahb",
> + "aux";
> + resets = <&gcc GCC_PCIE1_PIPE_ARES>,
> + <&gcc GCC_PCIE1_SLEEP_ARES>,
> + <&gcc GCC_PCIE1_CORE_STICKY_ARES>,
> + <&gcc GCC_PCIE1_AXI_MASTER_ARES>,
> + <&gcc GCC_PCIE1_AXI_SLAVE_ARES>,
> + <&gcc GCC_PCIE1_AHB_ARES>,
> + <&gcc GCC_PCIE1_AXI_MASTER_STICKY_ARES>;
> + reset-names = "pipe",
> + "sleep",
> + "sticky",
> + "axi_m",
> + "axi_s",
> + "ahb",
> + "axi_m_sticky";
> + status = "disabled";
> + };
> };
>
> cpus {
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
>
Powered by blists - more mailing lists