[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <09152d5f-5b49-9b8b-5ac3-829a2c9aab2e@roeck-us.net>
Date: Tue, 27 Mar 2018 14:04:06 -0700
From: Guenter Roeck <linux@...ck-us.net>
To: Eddie James <eajames@...ux.vnet.ibm.com>,
linux-watchdog@...r.kernel.org
Cc: openbmc@...ts.ozlabs.org, linux-kernel@...r.kernel.org,
wim@...ux-watchdog.org, joel@....id.au
Subject: Re: [PATCH v2] aspeed: watchdog: Set bootstatus during probe
On 03/27/2018 01:09 PM, Eddie James wrote:
> Check the aspeed timeout status register to see if the system has booted
> from the secondary boot source. If so, set the watchdog device
> bootstatus flag for "Card previously reset the CPU."
>
> Signed-off-by: Eddie James <eajames@...ux.vnet.ibm.com>
Reviewed-by: Guenter Roeck <linux@...ck-us.net>
> ---
> Changes since v1:
> - use bootstatus instead of status
> - use WDIOF_CARDRESET instead of raw register contents
>
> drivers/watchdog/aspeed_wdt.c | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/drivers/watchdog/aspeed_wdt.c b/drivers/watchdog/aspeed_wdt.c
> index a5b8eb2..1abe4d0 100644
> --- a/drivers/watchdog/aspeed_wdt.c
> +++ b/drivers/watchdog/aspeed_wdt.c
> @@ -55,6 +55,8 @@ struct aspeed_wdt_config {
> #define WDT_CTRL_WDT_INTR BIT(2)
> #define WDT_CTRL_RESET_SYSTEM BIT(1)
> #define WDT_CTRL_ENABLE BIT(0)
> +#define WDT_TIMEOUT_STATUS 0x10
> +#define WDT_TIMEOUT_STATUS_BOOT_SECONDARY BIT(1)
>
> /*
> * WDT_RESET_WIDTH controls the characteristics of the external pulse (if
> @@ -192,6 +194,7 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
> struct device_node *np;
> const char *reset_type;
> u32 duration;
> + u32 status;
> int ret;
>
> wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
> @@ -307,6 +310,10 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
> writel(duration - 1, wdt->base + WDT_RESET_WIDTH);
> }
>
> + status = readl(wdt->base + WDT_TIMEOUT_STATUS);
> + if (status & WDT_TIMEOUT_STATUS_BOOT_SECONDARY)
> + wdt->wdd.bootstatus = WDIOF_CARDRESET;
> +
> ret = devm_watchdog_register_device(&pdev->dev, &wdt->wdd);
> if (ret) {
> dev_err(&pdev->dev, "failed to register\n");
>
Powered by blists - more mailing lists