linux-kernel - Re: [PATCH v4 0/8] ARM: davinci: complete the conversion to using the reset framework

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <5576cb08-6a95-53fb-e905-96371c3b8465@ti.com>
Date:   Wed, 28 Mar 2018 17:44:10 -0500
From:   Suman Anna <s-anna@...com>
To:     Sekhar Nori <nsekhar@...com>, Bartosz Golaszewski <brgl@...ev.pl>,
        Stephen Boyd <sboyd@...nel.org>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        Ohad Ben-Cohen <ohad@...ery.com>
CC:     David Lechner <david@...hnology.com>,
        Kevin Hilman <khilman@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Michael Turquette <mturquette@...libre.com>,
        Philipp Zabel <p.zabel@...gutronix.de>,
        Rob Herring <robh+dt@...nel.org>,
        Russell King <linux@...linux.org.uk>,
        devicetree <devicetree@...r.kernel.org>,
        <linux-remoteproc@...r.kernel.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        Bartosz Golaszewski <bgolaszewski@...libre.com>,
        <linux-clk@...r.kernel.org>,
        Linux ARM <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH v4 0/8] ARM: davinci: complete the conversion to using the
 reset framework

On 03/27/2018 12:24 AM, Sekhar Nori wrote:
> Hi Suman,
> 
> On Tuesday 27 March 2018 06:12 AM, Suman Anna wrote:
>> I tried booting your tree [3] on the OMAPL138-LCDK board. I am using
>> NFS, and I am unable to get to the console. I don't have any issues
>> booting latest -next branch (next-20180326) which only has the reset and
>> clock driver related changes.
>>
>> Here's the log towards the end of the boot..
>> ---
>> pinctrl-single 1c14120.pinmux: 160 pins, size 80
>> Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
>> console [ttyS2] disabled
>> 1d0d000.serial: ttyS2 at MMIO 0x1d0d000 (irq = 61, base_baud = 8250000)
>> is a TI DA8xx/66AK2x
>> console [ttyS2] enabled
>> brd: module loaded
>> libphy: Fixed MDIO Bus: probed
>> davinci_mdio 1e24000.mdio: davinci mdio revision 1.5, bus freq 2200000
>> davinci_mdio 1e24000.mdio: no live phy, scanning all
>> davinci_mdio: probe of 1e24000.mdio failed with error -5
>> i2c /dev entries driver
>> <nothing after this>
> 
> This is because of a bug in bootloader PLL configuration which got
> uncovered only with CCF conversion. The bootloader that comes
> pre-flashed with the board or the latest U-Boot master should work fine.
> 
> Here is the log with latest U-Boot master:
> https://pastebin.ubuntu.com/p/HkwY9g4YDc/

Thanks Sekhar, able to boot and test after using the latest u-boot.

regards
Suman