linux-kernel - Re: omap4-droid4: voice call support was Re: [PATCHv5,5/5] ARM: dts: omap4-droid4: add soundcard

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20180329154600.qhels5fqzzg364gj@earth.universe>
Date:   Thu, 29 Mar 2018 17:46:00 +0200
From:   Sebastian Reichel <sebastian.reichel@...labora.co.uk>
To:     Tony Lindgren <tony@...mide.com>
Cc:     Mark Brown <broonie@...nel.org>, Pavel Machek <pavel@....cz>,
        Liam Girdwood <lgirdwood@...il.com>,
        Rob Herring <robh+dt@...nel.org>,
        Lee Jones <lee.jones@...aro.org>,
        Jaroslav Kysela <perex@...ex.cz>,
        Takashi Iwai <tiwai@...e.com>, alsa-devel@...a-project.org,
        linux-omap@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, kernel@...labora.com,
        Dan Williams <dcbw@...hat.com>
Subject: Re: omap4-droid4: voice call support was Re: [PATCHv5,5/5] ARM: dts:
 omap4-droid4: add soundcard

Hi,

On Thu, Mar 29, 2018 at 06:59:04AM -0700, Tony Lindgren wrote:
> > I think cpcap is always the clock and frame master, but I think
> > mdm6600 is the remote side and OMAP is not involved at all.
> 
> OK. So could it be just an alsamixer on/off toggle then for
> "Modem" or something similar?

I think so. We might want to have an "Mode" enum instead, though.
That can be extended, once we unlock the other modes (bluetooth,
bluetooth call).

> > > Then using the n_gsm ts 27.010 uart mux, I dial:
> > > 
> > > ./ngsm-rw 1 "AT+CFUN=1"		# connect to network
> > > U0001+CFUN:OK
> > > ./ngsm-rw 2 "AT+CMUT=0"		# unmute speaker over ch2, do this over qmi?
> > > U0001+CMUT:OK
> > > ./ngsm-rw 1 "ATD#123"		# dial number
> > > U0001D:OK
> 
> There's a typo above, it should be just ATD123 where 123 is the
> number.
> 
> I was just doing few test calls to robots. Payback time for all
> the robocalls, you know! :)
>
> > > And I do hear a voice talking over the speakerphone :) Sorry have not tested the
> > > mic yet..
> 
> And calling a person I can hear the other end but the mic is
> not working. So maybe I need to tweak the alsamixer settings
> too for mic?

Your override kills most settings from alsamixer. You can try to
just override CPCAP_REG_VAUDIOC, CPCAP_REG_CC and CPCAP_REG_CDI
and setup everything else with alsamixer.

-- Sebastian

Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)