| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1522396485-10248-2-git-send-email-nipun.gupta@nxp.com>
Date: Fri, 30 Mar 2018 13:24:45 +0530
From: Nipun Gupta <nipun.gupta@....com>
To: robin.murphy@....com, hch@....de, linux@...linux.org.uk,
gregkh@...uxfoundation.org, m.szyprowski@...sung.com
Cc: bhelgaas@...gle.com, zajec5@...il.com, andy.gross@...aro.org,
david.brown@...aro.org, dan.j.williams@...el.com,
vinod.koul@...el.com, thierry.reding@...il.com, robh+dt@...nel.org,
frowand.list@...il.com, jarkko.sakkinen@...ux.intel.com,
rafael.j.wysocki@...el.com, dmitry.torokhov@...il.com,
johan@...nel.org, msuchanek@...e.de, linux-kernel@...r.kernel.org,
iommu@...ts.linux-foundation.org, linux-wireless@...r.kernel.org,
linux-arm-msm@...r.kernel.org, linux-soc@...r.kernel.org,
dmaengine@...r.kernel.org, dri-devel@...ts.freedesktop.org,
linux-tegra@...r.kernel.org, devicetree@...r.kernel.org,
linux-pci@...r.kernel.org, bharat.bhushan@....com,
leoyang.li@....com, Nipun Gupta <nipun.gupta@....com>
Subject: [PATCH v3 2/2] drivers: remove force dma flag from buses
With each bus implementing its own DMA configuration callback,
there is no need for bus to explicitly have force_dma in its
global structure. This patch modifies of_dma_configure API to
accept an input parameter which specifies if implicit DMA
configuration is required even when it is not described by the
firmware.
Signed-off-by: Nipun Gupta <nipun.gupta@....com>
---
Changes in v2:
- This is a new change suggested by Robin and Christoph
and is added to the series.
Changes in v3:
- Rebase and changes corresponding to the changes in patch 1/2
drivers/amba/bus.c | 1 -
drivers/base/platform.c | 3 +--
drivers/bcma/main.c | 2 +-
drivers/dma/qcom/hidma_mgmt.c | 2 +-
drivers/gpu/host1x/bus.c | 5 ++---
drivers/of/device.c | 6 ++++--
drivers/of/of_reserved_mem.c | 2 +-
drivers/pci/pci-driver.c | 3 +--
include/linux/device.h | 4 ----
include/linux/of_device.h | 8 ++++++--
10 files changed, 17 insertions(+), 19 deletions(-)
diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
index 867dc2b..abe73c4 100644
--- a/drivers/amba/bus.c
+++ b/drivers/amba/bus.c
@@ -199,7 +199,6 @@ struct bus_type amba_bustype = {
.uevent = amba_uevent,
.dma_configure = platform_dma_configure,
.pm = &amba_pm,
- .force_dma = true,
};
static int __init amba_init(void)
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index 72fdbf6..cfbc569 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -1136,7 +1136,7 @@ int platform_dma_configure(struct device *dev)
int ret = 0;
if (dev->of_node) {
- ret = of_dma_configure(dev, dev->of_node);
+ ret = of_dma_configure(dev, dev->of_node, true);
} else if (has_acpi_companion(dev)) {
attr = acpi_get_dma_attr(to_acpi_device_node(dev->fwnode));
if (attr != DEV_DMA_NOT_SUPPORTED)
@@ -1159,7 +1159,6 @@ struct bus_type platform_bus_type = {
.uevent = platform_uevent,
.dma_configure = platform_dma_configure,
.pm = &platform_dev_pm_ops,
- .force_dma = true,
};
EXPORT_SYMBOL_GPL(platform_bus_type);
diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c
index e6986c7..fc1f4ac 100644
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
@@ -207,7 +207,7 @@ static void bcma_of_fill_device(struct device *parent,
core->irq = bcma_of_get_irq(parent, core, 0);
- of_dma_configure(&core->dev, node);
+ of_dma_configure(&core->dev, node, false);
}
unsigned int bcma_core_irq(struct bcma_device *core, int num)
diff --git a/drivers/dma/qcom/hidma_mgmt.c b/drivers/dma/qcom/hidma_mgmt.c
index 000c7019..d64edeb 100644
--- a/drivers/dma/qcom/hidma_mgmt.c
+++ b/drivers/dma/qcom/hidma_mgmt.c
@@ -398,7 +398,7 @@ static int __init hidma_mgmt_of_populate_channels(struct device_node *np)
}
of_node_get(child);
new_pdev->dev.of_node = child;
- of_dma_configure(&new_pdev->dev, child);
+ of_dma_configure(&new_pdev->dev, child, true);
/*
* It is assumed that calling of_msi_configure is safe on
* platforms with or without MSI support.
diff --git a/drivers/gpu/host1x/bus.c b/drivers/gpu/host1x/bus.c
index a9ec99d..b39c1e9 100644
--- a/drivers/gpu/host1x/bus.c
+++ b/drivers/gpu/host1x/bus.c
@@ -317,7 +317,7 @@ static int host1x_device_match(struct device *dev, struct device_driver *drv)
static int host1x_dma_configure(struct device *dev)
{
if (dev->of_node)
- return of_dma_configure(dev, dev->of_node);
+ return of_dma_configure(dev, dev->of_node, true);
return 0;
}
@@ -335,7 +335,6 @@ struct bus_type host1x_bus_type = {
.match = host1x_device_match,
.dma_configure = host1x_dma_configure,
.pm = &host1x_device_pm_ops,
- .force_dma = true,
};
static void __host1x_device_del(struct host1x_device *device)
@@ -424,7 +423,7 @@ static int host1x_device_add(struct host1x *host1x,
device->dev.bus = &host1x_bus_type;
device->dev.parent = host1x->dev;
- of_dma_configure(&device->dev, host1x->dev->of_node);
+ of_dma_configure(&device->dev, host1x->dev->of_node, true);
err = host1x_device_parse_dt(device, driver);
if (err < 0) {
diff --git a/drivers/of/device.c b/drivers/of/device.c
index 064c818..33d8551 100644
--- a/drivers/of/device.c
+++ b/drivers/of/device.c
@@ -76,6 +76,8 @@ int of_device_add(struct platform_device *ofdev)
* of_dma_configure - Setup DMA configuration
* @dev: Device to apply DMA configuration
* @np: Pointer to OF node having DMA configuration
+ * @force_dma: Whether device is to be set up by of_dma_configure() even if
+ * DMA capability is not explicitly described by firmware.
*
* Try to get devices's DMA configuration from DT and update it
* accordingly.
@@ -84,7 +86,7 @@ int of_device_add(struct platform_device *ofdev)
* can use a platform bus notifier and handle BUS_NOTIFY_ADD_DEVICE events
* to fix up DMA configuration.
*/
-int of_dma_configure(struct device *dev, struct device_node *np)
+int of_dma_configure(struct device *dev, struct device_node *np, bool force_dma)
{
u64 dma_addr, paddr, size = 0;
int ret;
@@ -100,7 +102,7 @@ int of_dma_configure(struct device *dev, struct device_node *np)
* DMA configuration regardless of whether "dma-ranges" is
* correctly specified or not.
*/
- if (!dev->bus->force_dma)
+ if (!force_dma)
return ret == -ENODEV ? 0 : ret;
dma_addr = offset = 0;
diff --git a/drivers/of/of_reserved_mem.c b/drivers/of/of_reserved_mem.c
index 9a4f4246..895c83e 100644
--- a/drivers/of/of_reserved_mem.c
+++ b/drivers/of/of_reserved_mem.c
@@ -353,7 +353,7 @@ int of_reserved_mem_device_init_by_idx(struct device *dev,
/* ensure that dma_ops is set for virtual devices
* using reserved memory
*/
- of_dma_configure(dev, np);
+ of_dma_configure(dev, np, true);
dev_info(dev, "assigned reserved memory node %s\n", rmem->name);
} else {
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 78e507f..27c832f 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -1540,7 +1540,7 @@ static int pci_dma_configure(struct device *dev)
if (IS_ENABLED(CONFIG_OF) && bridge->parent &&
bridge->parent->of_node) {
- ret = of_dma_configure(dev, bridge->parent->of_node);
+ ret = of_dma_configure(dev, bridge->parent->of_node, true);
} else if (has_acpi_companion(bridge)) {
struct acpi_device *adev = to_acpi_device_node(bridge->fwnode);
enum dev_dma_attr attr = acpi_get_dma_attr(adev);
@@ -1566,7 +1566,6 @@ struct bus_type pci_bus_type = {
.pm = PCI_PM_OPS_PTR,
.num_vf = pci_bus_num_vf,
.dma_configure = pci_dma_configure,
- .force_dma = true,
};
EXPORT_SYMBOL(pci_bus_type);
diff --git a/include/linux/device.h b/include/linux/device.h
index 1832d90..92c530e 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -98,8 +98,6 @@ extern int __must_check bus_create_file(struct bus_type *,
* @p: The private data of the driver core, only the driver core can
* touch this.
* @lock_key: Lock class key for use by the lock validator
- * @force_dma: Assume devices on this bus should be set up by dma_configure()
- * even if DMA capability is not explicitly described by firmware.
*
* A bus is a channel between the processor and one or more devices. For the
* purposes of the device model, all devices are connected via a bus, even if
@@ -140,8 +138,6 @@ struct bus_type {
struct subsys_private *p;
struct lock_class_key lock_key;
-
- bool force_dma;
};
extern int __must_check bus_register(struct bus_type *bus);
diff --git a/include/linux/of_device.h b/include/linux/of_device.h
index 8da5a1b..165fd30 100644
--- a/include/linux/of_device.h
+++ b/include/linux/of_device.h
@@ -55,7 +55,9 @@ static inline struct device_node *of_cpu_device_node_get(int cpu)
return of_node_get(cpu_dev->of_node);
}
-int of_dma_configure(struct device *dev, struct device_node *np);
+int of_dma_configure(struct device *dev,
+ struct device_node *np,
+ bool force_dma);
void of_dma_deconfigure(struct device *dev);
#else /* CONFIG_OF */
@@ -105,7 +107,9 @@ static inline struct device_node *of_cpu_device_node_get(int cpu)
return NULL;
}
-static inline int of_dma_configure(struct device *dev, struct device_node *np)
+static inline int of_dma_configure(struct device *dev,
+ struct device_node *np,
+ bool force_dma)
{
return 0;
}
--
1.9.1
Powered by blists - more mailing lists