linux-kernel - [PATCH v3 0/6] Add support for PWM input capture on STM32

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <1522404084-24903-1-git-send-email-fabrice.gasnier@st.com>
Date:   Fri, 30 Mar 2018 12:01:18 +0200
From:   Fabrice Gasnier <fabrice.gasnier@...com>
To:     <lee.jones@...aro.org>, <thierry.reding@...il.com>,
        <alexandre.torgue@...com>
CC:     <benjamin.gaignard@...aro.org>, <robh+dt@...nel.org>,
        <mark.rutland@....com>, <linux@...linux.org.uk>,
        <mcoquelin.stm32@...il.com>, <fabrice.gasnier@...com>,
        <benjamin.gaignard@...com>, <devicetree@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>, <linux-pwm@...r.kernel.org>
Subject: [PATCH v3 0/6] Add support for PWM input capture on STM32

This series adds support for capture to stm32-pwm driver.
Capture is based on DMAs.
- First two patches add support for requesting DMAs to MFD core
- Next three patches add support for capture to stm32-pwm driver
- This has been tested on stm32429i-eval board.

---
Changes in v3:
- Dropped 2 precusor patches applied by Thierry in pwm tree:
  "pwm: stm32: fix, remove unused struct device"
  "pwm: stm32: protect common prescaler for all channels"
- Note: this series applies on top on pwm tree
- Implements Lee's comments on MFD part: rework stm32_timers_dma struct,
  exported routine prototype now use generic device struct, more
  various comments (see patch 2 changelog).

Resend v2:
- Add collected Acks

Changes in v2:
- Abstract DMA handling from child driver: move it to MFD core
- Rework pwm capture routines to adopt this change
- Comment on optional dma support, beautify DMAs probe

Fabrice Gasnier (6):
  dt-bindings: mfd: stm32-timers: add support for dmas
  mfd: stm32-timers: add support for dmas
  pwm: stm32: add capture support
  pwm: stm32: improve capture by tuning counter prescaler
  pwm: stm32: use input prescaler to improve period capture
  ARM: dts: stm32: Enable pwm3 input capture on stm32f429i-eval

 .../devicetree/bindings/mfd/stm32-timers.txt       |  20 ++
 arch/arm/boot/dts/stm32429i-eval.dts               |   3 +
 drivers/mfd/stm32-timers.c                         | 219 +++++++++++++++++-
 drivers/pwm/pwm-stm32.c                            | 257 +++++++++++++++++++++
 include/linux/mfd/stm32-timers.h                   |  44 ++++
 5 files changed, 541 insertions(+), 2 deletions(-)

-- 
1.9.1