[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180331195524.GB19388@amd>
Date: Sat, 31 Mar 2018 21:55:24 +0200
From: Pavel Machek <pavel@....cz>
To: Tony Lindgren <tony@...mide.com>
Cc: Sebastian Reichel <sebastian.reichel@...labora.co.uk>,
Mark Brown <broonie@...nel.org>,
Liam Girdwood <lgirdwood@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Lee Jones <lee.jones@...aro.org>,
Jaroslav Kysela <perex@...ex.cz>,
Takashi Iwai <tiwai@...e.com>, alsa-devel@...a-project.org,
linux-omap@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, kernel@...labora.com,
Dan Williams <dcbw@...hat.com>
Subject: Re: call/normal switch was Re: omap4-droid4: voice call support was
On Sat 2018-03-31 21:46:16, Pavel Machek wrote:
> On Sat 2018-03-31 21:19:39, Pavel Machek wrote:
> > On Sat 2018-03-31 11:19:35, Tony Lindgren wrote:
> > > * Pavel Machek <pavel@....cz> [180331 14:56]:
> > > > Hi!
> > > >
> > > > > Hmm well I got audio call hacked to work as a proof of concept hack,
> > > > > see below. Maybe it can be used to verify some of the assumptions
> > > > > above.
> > > > >
> > > > > Then.. To split the work a bit, can you guys maybe try to decode
> > > > > the cpcap register values and try to do a proper ASoC driver patch?
> > > >
> > > > This is not proper patch yet, but it should be a step in that
> > > > direction...
> > >
> > > Cool :) Microphone still does not work for me.. I tried tweaking
> > > the alsamixer settings but no mic. This is with cold boot with
> > > droid4-kexecboot if that might make a difference, we may have
> > > some register uninitialized somewhere. Any ideas?
> >
> > Ok, I was focusing on the speaker side.
> >
> > alsamixer, tab to go to capture settings, set it to 37 37 Mic2 Mic1
> > should work, according to my notes, but not recently tested and not
> > tested against real human.
> >
> > I'll attempt to test it, but something in my userland shuts down
> > system just after boot 60% of time, which is rather annoying.
>
> Hmm. So I tried again, and setting Mic1 and back in the capture
> settings crashed the modem. Bang, disconnected from the USB.
Next try, and it worked this time.
_Before the call_, set mode to Normal and then Call. Then go to
capture, and set 100 100 Mic2 Mic1. Then place a call,
AT+CFUN=1
OK
ATD6;
If you change Mic1 setting, GSM modem will likely crash.
Good luck,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Download attachment "signature.asc" of type "application/pgp-signature" (182 bytes)
Powered by blists - more mailing lists