[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1522665945-28147-4-git-send-email-tdas@codeaurora.org>
Date: Mon, 2 Apr 2018 16:15:45 +0530
From: Taniya Das <tdas@...eaurora.org>
To: Stephen Boyd <sboyd@...eaurora.org>,
Michael Turquette <mturquette@...libre.com>
Cc: Andy Gross <andy.gross@...aro.org>,
David Brown <david.brown@...aro.org>,
Rajendra Nayak <rnayak@...eaurora.org>,
Odelu Kukatla <okukatla@...eaurora.org>,
Amit Nischal <anischal@...eaurora.org>,
linux-arm-msm@...r.kernel.org, linux-soc@...r.kernel.org,
linux-clk@...r.kernel.org, linux-kernel@...r.kernel.org,
Taniya Das <tdas@...eaurora.org>
Subject: [PATCH 3/3] clk: qcom: gdsc: Add support to poll CFG register to check GDSC state
From: Amit Nischal <anischal@...eaurora.org>
The default behavior of the GDSC enable/disable sequence is to
poll the status bits of either the actual GDSCR or the
corresponding HW_CTRL registers.
On targets which have support for a CFG_GDSCR register, the
status bits might not show the correct state of the GDSC,
especially in the disable sequence, where the status bit
will be cleared even before the core is completely power
collapsed. On targets with this issue, poll the power on/off
bits in the CFG_GDSCR register instead to correctly determine
the GDSC state.
Signed-off-by: Amit Nischal <anischal@...eaurora.org>
Signed-off-by: Taniya Das <tdas@...eaurora.org>
---
drivers/clk/qcom/gdsc.c | 48 ++++++++++++++++++++++++++++++++++++++++++++++--
drivers/clk/qcom/gdsc.h | 1 +
2 files changed, 47 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/qcom/gdsc.c b/drivers/clk/qcom/gdsc.c
index e89584e..e0c83ba 100644
--- a/drivers/clk/qcom/gdsc.c
+++ b/drivers/clk/qcom/gdsc.c
@@ -33,6 +33,11 @@
#define GMEM_CLAMP_IO_MASK BIT(0)
#define GMEM_RESET_MASK BIT(4)
+/* CFG_GDSCR */
+#define GDSC_POWER_UP_COMPLETE BIT(16)
+#define GDSC_POWER_DOWN_COMPLETE BIT(15)
+#define CFG_GDSCR_OFFSET 0x4
+
/* Wait 2^n CXO cycles between all states. Here, n=2 (4 cycles). */
#define EN_REST_WAIT_VAL (0x2 << 20)
#define EN_FEW_WAIT_VAL (0x8 << 16)
@@ -83,6 +88,38 @@ static int gdsc_poll_status(struct gdsc *sc, unsigned int reg, bool en)
return -ETIMEDOUT;
}
+static int gdsc_is_enabled_by_poll_cfg_reg(struct gdsc *sc, bool en)
+{
+ u32 val;
+ int ret;
+
+ ret = regmap_read(sc->regmap, sc->gdscr + CFG_GDSCR_OFFSET, &val);
+ if (ret)
+ return ret;
+
+ if (en)
+ return !!(val & GDSC_POWER_UP_COMPLETE);
+ else
+ return !(val & GDSC_POWER_DOWN_COMPLETE);
+}
+
+static int gdsc_poll_cfg_status(struct gdsc *sc, bool en)
+{
+ ktime_t start = ktime_get();
+ ktime_t timeout =
+ (sc->flags & GDS_TIMEOUT) ? TIMEOUT_US_GDS : TIMEOUT_US;
+
+ do {
+ if (gdsc_is_enabled_by_poll_cfg_reg(sc, en) == en)
+ return 0;
+ } while (ktime_us_delta(ktime_get(), start) < timeout);
+
+ if (gdsc_is_enabled_by_poll_cfg_reg(sc, en) == en)
+ return 0;
+
+ return -ETIMEDOUT;
+}
+
static int gdsc_toggle_logic(struct gdsc *sc, bool en)
{
int ret;
@@ -106,6 +143,9 @@ static int gdsc_toggle_logic(struct gdsc *sc, bool en)
return 0;
}
+ if (sc->flags & POLL_CFG_GDSCR)
+ return gdsc_poll_cfg_status(sc, en);
+
if (sc->gds_hw_ctrl) {
status_reg = sc->gds_hw_ctrl;
/*
@@ -258,8 +298,12 @@ static int gdsc_disable(struct generic_pm_domain *domain)
*/
udelay(1);
- reg = sc->gds_hw_ctrl ? sc->gds_hw_ctrl : sc->gdscr;
- ret = gdsc_poll_status(sc, reg, true);
+ if (sc->flags & POLL_CFG_GDSCR) {
+ ret = gdsc_poll_cfg_status(sc, true);
+ } else {
+ reg = sc->gds_hw_ctrl ? sc->gds_hw_ctrl : sc->gdscr;
+ ret = gdsc_poll_status(sc, reg, true);
+ }
if (ret)
return ret;
}
diff --git a/drivers/clk/qcom/gdsc.h b/drivers/clk/qcom/gdsc.h
index 2e3abbf..a74f715 100644
--- a/drivers/clk/qcom/gdsc.h
+++ b/drivers/clk/qcom/gdsc.h
@@ -56,6 +56,7 @@ struct gdsc {
#define SW_RESET BIT(3)
#define AON_RESET BIT(4)
#define GDS_TIMEOUT BIT(5)
+#define POLL_CFG_GDSCR BIT(6)
struct reset_controller_dev *rcdev;
unsigned int *resets;
unsigned int reset_count;
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the Linux Foundation.
Powered by blists - more mailing lists