Message-ID: <20180402120440.31900-6-liuwenliang@huawei.com>
Date:   Mon, 2 Apr 2018 20:04:39 +0800
From:   Abbott Liu <liuwenliang@...wei.com>
To:     <aryabinin@...tuozzo.com>, <dvyukov@...gle.com>, <corbet@....net>,
        <linux@...linux.org.uk>, <christoffer.dall@...aro.org>,
        <marc.zyngier@....com>, <kstewart@...uxfoundation.org>,
        <gregkh@...uxfoundation.org>, <f.fainelli@...il.com>,
        <liuwenliang@...wei.com>, <akpm@...ux-foundation.org>,
        <linux@...musvillemoes.dk>, <mawilcox@...rosoft.com>,
        <pombredanne@...b.com>, <ard.biesheuvel@...aro.org>,
        <vladimir.murzin@....com>, <alexander.levin@...izon.com>,
        <nicolas.pitre@...aro.org>, <tglx@...utronix.de>,
        <thgarnie@...gle.com>, <dhowells@...hat.com>,
        <keescook@...omium.org>, <arnd@...db.de>, <geert@...ux-m68k.org>,
        <tixy@...aro.org>, <julien.thierry@....com>,
        <mark.rutland@....com>, <james.morse@....com>,
        <zhichao.huang@...aro.org>, <jinb.park7@...il.com>,
        <labbott@...hat.com>, <philip@....systems>,
        <grygorii.strashko@...aro.org>, <catalin.marinas@....com>,
        <opendmb@...il.com>, <kirill.shutemov@...ux.intel.com>,
        <kasan-dev@...glegroups.com>, <linux-doc@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <kvmarm@...ts.cs.columbia.edu>, <linux-mm@...ck.org>
Subject: [PATCH v3 5/6] Initialize the mapping of KASan shadow memory

From: Andrey Ryabinin <a.ryabinin@...sung.com>

This patch initializes KASan shadow region's page table and memory.
There are two stage for KASan initializing:
1. At early boot stage the whole shadow region is mapped to just
   one physical page (kasan_zero_page). It's finished by the function
   kasan_early_init which is called by __mmap_switched(arch/arm/kernel/
   head-common.S)
             ---Andrey Ryabinin <a.ryabinin@...sung.com>

2. After the calling of paging_init, we use kasan_zero_page as zero
   shadow for some memory that KASan don't need to track, and we alloc
   new shadow space for the other memory that KASan need to track. These
   issues are finished by the function kasan_init which is call by
   setup_arch.
            ---Andrey Ryabinin <a.ryabinin@...sung.com>

3. Add support arm LPAE
   If LPAE is enabled, KASan shadow region's mapping table need be copyed
   in pgd_alloc function.
            ---Abbott Liu <liuwenliang@...wei.com>

4. In 64bit machine, size_t is unsigned long, but int 32bit machine,
   size_t is unsigned int, so we need type conversion in
   the function of kasan_cache_create.
            ---Abbott Liu <liuwenliang@...wei.com>

5. Change kasan_pte_populate,kasan_pmd_populate,kasan_pud_populate,
   kasan_pgd_populate from .meminit.text section to .init.text section.
           ---Reported by: Florian Fainelli <f.fainelli@...il.com>
           ---Signed off by: Abbott Liu <liuwenliang@...wei.com>

Cc: Andrey Ryabinin <a.ryabinin@...sung.com>
Co-Developed-by: Abbott Liu <liuwenliang@...wei.com>
Reviewed-by: Russell King - ARM Linux <linux@...linux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@...il.com>
Reported-by: Florian Fainelli <f.fainelli@...il.com>
Tested-by: Florian Fainelli <f.fainelli@...il.com>
Tested-by: Joel Stanley <joel@....id.au>
Tested-by: Abbott Liu <liuwenliang@...wei.com>
Signed-off-by: Abbott Liu <liuwenliang@...wei.com>
---
 arch/arm/include/asm/kasan.h       |  35 +++++
 arch/arm/include/asm/pgalloc.h     |   7 +-
 arch/arm/include/asm/thread_info.h |   4 +
 arch/arm/kernel/head-common.S      |   3 +
 arch/arm/kernel/setup.c            |   2 +
 arch/arm/mm/Makefile               |   3 +
 arch/arm/mm/kasan_init.c           | 302 +++++++++++++++++++++++++++++++++++++
 arch/arm/mm/pgd.c                  |  14 ++
 mm/kasan/kasan.c                   |   5 +-
 9 files changed, 371 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm/include/asm/kasan.h
 create mode 100644 arch/arm/mm/kasan_init.c

diff --git a/arch/arm/include/asm/kasan.h b/arch/arm/include/asm/kasan.h
new file mode 100644
index 0000000..1801f4d
--- /dev/null
+++ b/arch/arm/include/asm/kasan.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/include/asm/kasan.h
+ *
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ * Author: Andrey Ryabinin <ryabinin.a.a@...il.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_KASAN_H
+#define __ASM_KASAN_H
+
+#ifdef CONFIG_KASAN
+
+#include <asm/kasan_def.h>
+
+#define KASAN_SHADOW_SCALE_SHIFT 3
+
+/*
+ * Compiler uses shadow offset assuming that addresses start
+ * from 0. Kernel addresses don't start from 0, so shadow
+ * for kernel really starts from 'compiler's shadow offset' +
+ * ('kernel address space start' >> KASAN_SHADOW_SCALE_SHIFT)
+ */
+
+extern void kasan_init(void);
+
+#else
+static inline void kasan_init(void) { }
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/pgalloc.h b/arch/arm/include/asm/pgalloc.h
index 2d7344f..f170659 100644
--- a/arch/arm/include/asm/pgalloc.h
+++ b/arch/arm/include/asm/pgalloc.h
@@ -50,8 +50,11 @@ static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
  */
 #define pmd_alloc_one(mm,addr)		({ BUG(); ((pmd_t *)2); })
 #define pmd_free(mm, pmd)		do { } while (0)
-#define pud_populate(mm,pmd,pte)	BUG()
-
+#ifndef CONFIG_KASAN
+#define pud_populate(mm, pmd, pte)	BUG()
+#else
+#define pud_populate(mm, pmd, pte)	do { } while (0)
+#endif
 #endif	/* CONFIG_ARM_LPAE */
 
 extern pgd_t *pgd_alloc(struct mm_struct *mm);
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index e71cc35..bc681a0 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -16,7 +16,11 @@
 #include <asm/fpstate.h>
 #include <asm/page.h>
 
+#ifdef CONFIG_KASAN
+#define THREAD_SIZE_ORDER	2
+#else
 #define THREAD_SIZE_ORDER	1
+#endif
 #define THREAD_SIZE		(PAGE_SIZE << THREAD_SIZE_ORDER)
 #define THREAD_START_SP		(THREAD_SIZE - 8)
 
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index c79b829..20161e2 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -115,6 +115,9 @@ __mmap_switched:
 	str	r8, [r2]			@ Save atags pointer
 	cmp	r3, #0
 	strne	r10, [r3]			@ Save control register values
+#ifdef CONFIG_KASAN
+	bl	kasan_early_init
+#endif
 	mov	lr, #0
 	b	start_kernel
 ENDPROC(__mmap_switched)
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index fc40a2b..81c3e9df 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -62,6 +62,7 @@
 #include <asm/unwind.h>
 #include <asm/memblock.h>
 #include <asm/virt.h>
+#include <asm/kasan.h>
 
 #include "atags.h"
 
@@ -1118,6 +1119,7 @@ void __init setup_arch(char **cmdline_p)
 	early_ioremap_reset();
 
 	paging_init(mdesc);
+	kasan_init();
 	request_standard_resources(mdesc);
 
 	if (mdesc->restart)
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 9dbb849..573203e 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -111,3 +111,6 @@ obj-$(CONFIG_CACHE_L2X0_PMU)	+= cache-l2x0-pmu.o
 obj-$(CONFIG_CACHE_XSC3L2)	+= cache-xsc3l2.o
 obj-$(CONFIG_CACHE_TAUROS2)	+= cache-tauros2.o
 obj-$(CONFIG_CACHE_UNIPHIER)	+= cache-uniphier.o
+
+KASAN_SANITIZE_kasan_init.o    := n
+obj-$(CONFIG_KASAN)            += kasan_init.o
diff --git a/arch/arm/mm/kasan_init.c b/arch/arm/mm/kasan_init.c
new file mode 100644
index 0000000..461cc85
--- /dev/null
+++ b/arch/arm/mm/kasan_init.c
@@ -0,0 +1,302 @@
+/*
+ * This file contains kasan initialization code for ARM.
+ *
+ * Copyright (c) 2018 Samsung Electronics Co., Ltd.
+ * Author: Andrey Ryabinin <ryabinin.a.a@...il.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/bootmem.h>
+#include <linux/kasan.h>
+#include <linux/kernel.h>
+#include <linux/memblock.h>
+#include <linux/start_kernel.h>
+#include <asm/cputype.h>
+#include <asm/highmem.h>
+#include <asm/mach/map.h>
+#include <asm/memory.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+#include <asm/pgtable.h>
+#include <asm/procinfo.h>
+#include <asm/proc-fns.h>
+#include <asm/tlbflush.h>
+#include <asm/cp15.h>
+#include <linux/sched/task.h>
+
+#include "mm.h"
+
+static pgd_t tmp_pgd_table[PTRS_PER_PGD] __initdata __aligned(1ULL << 14);
+
+pmd_t tmp_pmd_table[PTRS_PER_PMD] __page_aligned_bss;
+
+static __init void *kasan_alloc_block(size_t size, int node)
+{
+	return memblock_virt_alloc_try_nid(size, size, __pa(MAX_DMA_ADDRESS),
+					BOOTMEM_ALLOC_ACCESSIBLE, node);
+}
+
+static void __init kasan_early_pmd_populate(unsigned long start,
+					unsigned long end, pud_t *pud)
+{
+	unsigned long addr;
+	unsigned long next;
+	pmd_t *pmd;
+
+	pmd = pmd_offset(pud, start);
+	for (addr = start; addr < end;) {
+		pmd_populate_kernel(&init_mm, pmd, kasan_zero_pte);
+		next = pmd_addr_end(addr, end);
+		addr = next;
+		flush_pmd_entry(pmd);
+		pmd++;
+	}
+}
+
+static void __init kasan_early_pud_populate(unsigned long start,
+				unsigned long end, pgd_t *pgd)
+{
+	unsigned long addr;
+	unsigned long next;
+	pud_t *pud;
+
+	pud = pud_offset(pgd, start);
+	for (addr = start; addr < end;) {
+		next = pud_addr_end(addr, end);
+		kasan_early_pmd_populate(addr, next, pud);
+		addr = next;
+		pud++;
+	}
+}
+
+void __init kasan_map_early_shadow(pgd_t *pgdp)
+{
+	int i;
+	unsigned long start = KASAN_SHADOW_START;
+	unsigned long end = KASAN_SHADOW_END;
+	unsigned long addr;
+	unsigned long next;
+	pgd_t *pgd;
+
+	for (i = 0; i < PTRS_PER_PTE; i++)
+		set_pte_at(&init_mm, KASAN_SHADOW_START + i*PAGE_SIZE,
+			&kasan_zero_pte[i], pfn_pte(
+				virt_to_pfn(kasan_zero_page),
+				__pgprot(_L_PTE_DEFAULT | L_PTE_DIRTY
+					| L_PTE_XN)));
+
+	pgd = pgd_offset_k(start);
+	for (addr = start; addr < end;) {
+		next = pgd_addr_end(addr, end);
+		kasan_early_pud_populate(addr, next, pgd);
+		addr = next;
+		pgd++;
+	}
+}
+
+extern struct proc_info_list *lookup_processor_type(unsigned int);
+
+void __init kasan_early_init(void)
+{
+	struct proc_info_list *list;
+
+	/*
+	 * locate processor in the list of supported processor
+	 * types.  The linker builds this table for us from the
+	 * entries in arch/arm/mm/proc-*.S
+	 */
+	list = lookup_processor_type(read_cpuid_id());
+	if (list) {
+#ifdef MULTI_CPU
+		processor = *list->proc;
+#endif
+	}
+
+	BUILD_BUG_ON((KASAN_SHADOW_END - (1UL << 29)) != KASAN_SHADOW_OFFSET);
+	kasan_map_early_shadow(swapper_pg_dir);
+}
+
+static void __init clear_pgds(unsigned long start,
+			unsigned long end)
+{
+	for (; start && start < end; start += PMD_SIZE)
+		pmd_clear(pmd_off_k(start));
+}
+
+pte_t * __init kasan_pte_populate(pmd_t *pmd, unsigned long addr, int node)
+{
+	pte_t *pte = pte_offset_kernel(pmd, addr);
+
+	if (pte_none(*pte)) {
+		pte_t entry;
+		void *p = kasan_alloc_block(PAGE_SIZE, node);
+
+		if (!p)
+			return NULL;
+		entry = pfn_pte(virt_to_pfn(p),
+			__pgprot(pgprot_val(PAGE_KERNEL)));
+		set_pte_at(&init_mm, addr, pte, entry);
+	}
+	return pte;
+}
+
+pmd_t * __init kasan_pmd_populate(pud_t *pud, unsigned long addr, int node)
+{
+	pmd_t *pmd = pmd_offset(pud, addr);
+
+	if (pmd_none(*pmd)) {
+		void *p = kasan_alloc_block(PAGE_SIZE, node);
+
+		if (!p)
+			return NULL;
+		pmd_populate_kernel(&init_mm, pmd, p);
+	}
+	return pmd;
+}
+
+pud_t * __init kasan_pud_populate(pgd_t *pgd, unsigned long addr, int node)
+{
+	pud_t *pud = pud_offset(pgd, addr);
+
+	if (pud_none(*pud)) {
+		void *p = kasan_alloc_block(PAGE_SIZE, node);
+
+		if (!p)
+			return NULL;
+		pr_err("populating pud addr %lx\n", addr);
+		pud_populate(&init_mm, pud, p);
+	}
+	return pud;
+}
+
+pgd_t * __init kasan_pgd_populate(unsigned long addr, int node)
+{
+	pgd_t *pgd = pgd_offset_k(addr);
+
+	if (pgd_none(*pgd)) {
+		void *p = kasan_alloc_block(PAGE_SIZE, node);
+
+		if (!p)
+			return NULL;
+		pgd_populate(&init_mm, pgd, p);
+	}
+	return pgd;
+}
+
+static int __init create_mapping(unsigned long start, unsigned long end,
+				int node)
+{
+	unsigned long addr = start;
+	pgd_t *pgd;
+	pud_t *pud;
+	pmd_t *pmd;
+	pte_t *pte;
+
+	pr_info("populating shadow for %lx, %lx\n", start, end);
+
+	for (; addr < end; addr += PAGE_SIZE) {
+		pgd = kasan_pgd_populate(addr, node);
+		if (!pgd)
+			return -ENOMEM;
+
+		pud = kasan_pud_populate(pgd, addr, node);
+		if (!pud)
+			return -ENOMEM;
+
+		pmd = kasan_pmd_populate(pud, addr, node);
+		if (!pmd)
+			return -ENOMEM;
+
+		pte = kasan_pte_populate(pmd, addr, node);
+		if (!pte)
+			return -ENOMEM;
+	}
+	return 0;
+}
+
+
+void __init kasan_init(void)
+{
+	struct memblock_region *reg;
+	u64 orig_ttbr0;
+	int i;
+
+	/*
+	 * We are going to perform proper setup of shadow memory.
+	 * At first we should unmap early shadow (clear_pgds() call bellow).
+	 * However, instrumented code couldn't execute without shadow memory.
+	 * tmp_pgd_table and tmp_pmd_table used to keep early shadow mapped
+	 * until full shadow setup will be finished.
+	 */
+	orig_ttbr0 = get_ttbr0();
+
+#ifdef CONFIG_ARM_LPAE
+	memcpy(tmp_pmd_table,
+		pgd_page_vaddr(*pgd_offset_k(KASAN_SHADOW_START)),
+		sizeof(tmp_pmd_table));
+	memcpy(tmp_pgd_table, swapper_pg_dir, sizeof(tmp_pgd_table));
+	set_pgd(&tmp_pgd_table[pgd_index(KASAN_SHADOW_START)],
+		__pgd(__pa(tmp_pmd_table) | PMD_TYPE_TABLE | L_PGD_SWAPPER));
+	set_ttbr0(__pa(tmp_pgd_table));
+#else
+	memcpy(tmp_pgd_table, swapper_pg_dir, sizeof(tmp_pgd_table));
+	set_ttbr0((u64)__pa(tmp_pgd_table));
+#endif
+	flush_cache_all();
+	local_flush_bp_all();
+	local_flush_tlb_all();
+
+	clear_pgds(KASAN_SHADOW_START, KASAN_SHADOW_END);
+
+	kasan_populate_zero_shadow(kasan_mem_to_shadow((void *)VMALLOC_START),
+				kasan_mem_to_shadow((void *)-1UL) + 1);
+
+	for_each_memblock(memory, reg) {
+		void *start = __va(reg->base);
+		void *end = __va(reg->base + reg->size);
+
+		if (reg->base + reg->size > arm_lowmem_limit)
+			end = __va(arm_lowmem_limit);
+		if (start >= end)
+			break;
+
+		create_mapping((unsigned long)kasan_mem_to_shadow(start),
+			(unsigned long)kasan_mem_to_shadow(end),
+			NUMA_NO_NODE);
+	}
+
+	/*1.the module's global variable is in MODULES_VADDR ~ MODULES_END,
+	 *  so we need mapping.
+	 *2.PKMAP_BASE ~ PKMAP_BASE+PMD_SIZE's shadow and MODULES_VADDR
+	 *  ~ MODULES_END's shadow is in the same PMD_SIZE, so we cant
+	 *  use kasan_populate_zero_shadow.
+	 */
+	create_mapping(
+		(unsigned long)kasan_mem_to_shadow((void *)MODULES_VADDR),
+
+		(unsigned long)kasan_mem_to_shadow((void *)(PKMAP_BASE +
+							PMD_SIZE)),
+		NUMA_NO_NODE);
+
+	/*
+	 * KAsan may reuse the contents of kasan_zero_pte directly, so we
+	 * should make sure that it maps the zero page read-only.
+	 */
+	for (i = 0; i < PTRS_PER_PTE; i++)
+		set_pte_at(&init_mm, KASAN_SHADOW_START + i*PAGE_SIZE,
+			&kasan_zero_pte[i],
+			pfn_pte(virt_to_pfn(kasan_zero_page),
+				__pgprot(pgprot_val(PAGE_KERNEL)
+					| L_PTE_RDONLY)));
+	memset(kasan_zero_page, 0, PAGE_SIZE);
+	set_ttbr0(orig_ttbr0);
+	flush_cache_all();
+	local_flush_bp_all();
+	local_flush_tlb_all();
+	pr_info("Kernel address sanitizer initialized\n");
+	init_task.kasan_depth = 0;
+}
diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c
index 61e281c..4644a21 100644
--- a/arch/arm/mm/pgd.c
+++ b/arch/arm/mm/pgd.c
@@ -64,6 +64,20 @@ pgd_t *pgd_alloc(struct mm_struct *mm)
 	new_pmd = pmd_alloc(mm, new_pud, 0);
 	if (!new_pmd)
 		goto no_pmd;
+#ifdef CONFIG_KASAN
+	/*
+	 *Copy PMD table for KASAN shadow mappings.
+	 */
+	init_pgd = pgd_offset_k(TASK_SIZE);
+	init_pud = pud_offset(init_pgd, TASK_SIZE);
+	init_pmd = pmd_offset(init_pud, TASK_SIZE);
+	new_pmd = pmd_offset(new_pud, TASK_SIZE);
+	memcpy(new_pmd, init_pmd,
+		(pmd_index(MODULES_VADDR)-pmd_index(TASK_SIZE))
+		* sizeof(pmd_t));
+	clean_dcache_area(new_pmd, PTRS_PER_PMD*sizeof(pmd_t));
+#endif
+
 #endif
 
 	if (!vectors_high()) {
diff --git a/mm/kasan/kasan.c b/mm/kasan/kasan.c
index e13d911..6d32623 100644
--- a/mm/kasan/kasan.c
+++ b/mm/kasan/kasan.c
@@ -358,8 +358,9 @@ void kasan_cache_create(struct kmem_cache *cache, size_t *size,
 	if (redzone_adjust > 0)
 		*size += redzone_adjust;
 
-	*size = min(KMALLOC_MAX_SIZE, max(*size, cache->object_size +
-					optimal_redzone(cache->object_size)));
+	*size = min_t(unsigned long, KMALLOC_MAX_SIZE,
+			max(*size, cache->object_size +
+				optimal_redzone(cache->object_size)));
 
 	/*
 	 * If the metadata doesn't fit, don't enable KASAN at all.
-- 
2.9.0

Powered by blists - more mailing lists