lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:   Thu,  5 Apr 2018 15:35:04 +0200
From:   Esben Haabendal <esben.haabendal@...il.com>
To:     netdev@...r.kernel.org
Cc:     Esben Haabendal <eha@...f.com>,
        Rasmus Villemoes <rasmus.villemoes@...vas.dk>,
        Andrew Lunn <andrew@...n.ch>,
        Florian Fainelli <f.fainelli@...il.com>,
        linux-kernel@...r.kernel.org (open list)
Subject: [PATCH] net: phy: marvell: Enable interrupt function on LED2 pin

From: Esben Haabendal <eha@...f.com>

The LED2[2]/INTn pin on Marvell 88E1318S as well as 88E1510/12/14/18 needs
to be configured to be usable as interrupt not only when WOL is enabled,
but whenever we rely on interrupts from the PHY.

Signed-off-by: Esben Haabendal <eha@...f.com>
Cc: Rasmus Villemoes <rasmus.villemoes@...vas.dk>
---
 drivers/net/phy/marvell.c | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 0e0978d8a0eb..f03a510f1247 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -457,6 +457,21 @@ static int marvell_of_reg_init(struct phy_device *phydev)
 }
 #endif /* CONFIG_OF_MDIO */
 
+static int m88e1318_config_intr(struct phy_device *phydev)
+{
+	int err;
+
+	err = marvell_config_intr(phydev);
+	if (err)
+		return err;
+
+	/* Setup LED[2] as interrupt pin (active low) */
+	return phy_modify(phydev, MII_88E1318S_PHY_LED_TCR,
+			  MII_88E1318S_PHY_LED_TCR_FORCE_INT,
+			  MII_88E1318S_PHY_LED_TCR_INTn_ENABLE |
+			  MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW);
+}
+
 static int m88e1121_config_aneg_rgmii_delays(struct phy_device *phydev)
 {
 	int mscr;
@@ -2090,7 +2105,7 @@ static struct phy_driver marvell_drivers[] = {
 		.config_aneg = &m88e1318_config_aneg,
 		.read_status = &marvell_read_status,
 		.ack_interrupt = &marvell_ack_interrupt,
-		.config_intr = &marvell_config_intr,
+		.config_intr = &m88e1318_config_intr,
 		.did_interrupt = &m88e1121_did_interrupt,
 		.get_wol = &m88e1318_get_wol,
 		.set_wol = &m88e1318_set_wol,
@@ -2189,7 +2204,7 @@ static struct phy_driver marvell_drivers[] = {
 		.config_aneg = &m88e1510_config_aneg,
 		.read_status = &marvell_read_status,
 		.ack_interrupt = &marvell_ack_interrupt,
-		.config_intr = &marvell_config_intr,
+		.config_intr = &m88e1318_config_intr,
 		.did_interrupt = &m88e1121_did_interrupt,
 		.get_wol = &m88e1318_get_wol,
 		.set_wol = &m88e1318_set_wol,
-- 
2.16.3

Powered by blists - more mailing lists