lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1523033249.32118.85.camel@tzanussi-mobl.amr.corp.intel.com>
Date:   Fri, 06 Apr 2018 11:47:29 -0500
From:   Tom Zanussi <tom.zanussi@...ux.intel.com>
To:     Masami Hiramatsu <mhiramat@...nel.org>
Cc:     rostedt@...dmis.org, tglx@...utronix.de, namhyung@...nel.org,
        vedang.patel@...el.com, bigeasy@...utronix.de,
        joel.opensrc@...il.com, joelaf@...gle.com,
        mathieu.desnoyers@...icios.com, baohong.liu@...el.com,
        rajvi.jingar@...el.com, julia@...com, fengguang.wu@...el.com,
        linux-kernel@...r.kernel.org, linux-rt-users@...r.kernel.org
Subject: Re: [PATCH 3/4] tracing: Add action comparisons when testing
 matching hist triggers

Hi Masami,

On Fri, 2018-04-06 at 10:53 +0900, Masami Hiramatsu wrote:
> Hi Tom,
> 
> On Thu, 05 Apr 2018 18:34:13 -0500
> Tom Zanussi <tom.zanussi@...ux.intel.com> wrote:
> 
> > Hi Masami,
> > 
> > On Thu, 2018-04-05 at 12:50 +0900, Masami Hiramatsu wrote:
> > 
> > [...]
> > 
> > > Can you print out the error with which event we should see? e.g.
> > > 
> > >   ERROR: Variable already defined at sched_wakeup: ts0
> > > 
> > 
> > How about printing the event name along with the last command, for any
> > error? :
> > 
> >   ERROR: Variable already defined: ts0
> >     Last command: [sched:sched_wakeup] keys=pid:ts0=common_timestamp.usecs if comm=="cyclictest"
> 
> Hmm, is the Last command shows the last command on sched_wakeup ? or sched_switch??
> 

Just the last command that executed with an error - it's a global set by
the last command that failed, kind of like errno.

In this case, the last error was for the command listed, on the
sched_wakeup event.  Even if you see it by reading a different hist
file, the last error is still the same - we don't keep a last error for
each event.

> [...]
> > Before:
> > 
> >   # echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger
> > 
> >   # echo '!hist:keys=next_pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
> > 
> > And other commands making us think we cleared everything out so the
> > below error is a surprise
> > 
> >   # echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger
> >   -su: echo: write error: Invalid argument
> 
> No, my senario is different.
> 
> Your senario tries
> 1) define ts0 on sched_wakeup
> 2) remove ts0 from sched_switch (but silently failed)
> 3) re-define ts0 on sched_wakeup and get an error
> 
> In this case, user can dump sched_wakeup/trigger and see there is already ts0 defined.
> 
> My senario is a bit different
> 1) define ts0 on sched_wakeup
> 2) remove ts0 from sched_switch (but silently failed)
> 3) re-define ts0 on *sched_switch* and get an error
> 
> The 3rd operation failed on "sched_switch" not on "sched_wakeup". In this case we will totally lost where the ts0 defined.
> That's why I have asked you to show "where the ts0 is defined" at error line.
> 

Your scenario should work, which is why I assumed my scenario.  Anyway,
this I think corresponds to your scenario, which works for me:

  # echo 'wakeup_latency u64 lat; pid_t pid' >> /sys/kernel/debug/tracing/synthetic_events
  # echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger
  # echo '!hist:keys=next_pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
  # echo 'hist:keys=next_pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger

I also tried this, which works too:

  # echo '!wakeup_latency u64 lat; pid_t pid' >> /sys/kernel/debug/tracing/synthetic_events
  # echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger
  # echo 'hist:keys=next_pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
  # echo '!hist:keys=next_pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
  # echo '!hist:keys=next_pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
  # echo 'hist:keys=next_pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger

When I looked at the details of what you did in your script, it
corresponded to my scenario - the error you saw was because you didn't
remove the sched_wakeup trigger though you apparently thought you did,
and then tried to do it again (according to your script, the command
that failed was to sched_wakeup, and then you looked at sched_switch and
saw the error).

Anyway, here's the corresponding version that works if you add the
trigger to sched_switch instead of twice to sched_wakeup:

Try adding to sched_wakeup, fails:

  # echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger
    -su: echo: 
    write error: Invalid argument

Look at sched_switch instead of sched_wakeup, shows error was on sched_wakeup:

  # cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist
    ERROR: Variable already defined: ts0
    Last command: [sched:sched_wakeup] keys=pid:ts0=common_timestamp.usecs if comm=="cyclictest"

Look at sched_wakeup, sched_wakeup trigger exists and has the ts0 defined:

  # cat /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger
    hist:keys=pid:vals=hitcount:ts0=common_timestamp.usecs:sort=hitcount:size=2048:clock=global if comm=="cyclictest" [active]

Let's add a trigger with ts0 to sched_switch:

  # echo 'hist:keys=next_pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger

No error seen, and now we can see that both sched_switch and sched_wakeup have triggers with ts0:

  # cat /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
    hist:keys=next_pid:vals=hitcount:ts0=common_timestamp.usecs:sort=hitcount:size=2048:clock=global if comm=="cyclictest" [active]
  # cat /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger
    hist:keys=pid:vals=hitcount:ts0=common_timestamp.usecs:sort=hitcount:size=2048:clock=global if comm=="cyclictest" [active]
 
Now at this point, we have two triggers with the same variable name, ts0
- if we try to use an unqualified ts0 in another trigger, we get an
error:

  # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0 if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
    -su: echo: write error: Invalid argument
  # cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist
  # event histogram
  #
  # trigger info: 
    hist:keys=next_pid:vals=hitcount:ts0=common_timestamp.usecs:sort=hitcount:size=2048:clock=global if comm=="cyclictest" [active]
  #


  Totals:
       Hits: 0
       Entries: 0
       Dropped: 0

  ERROR: Variable name not unique, need to use fully qualified name (subsys.event.var) for variable: ts0
   Last command: [sched:sched_switch] keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0 if next_comm=="cyclictest"


So in order to set the trigger, we need to explicitly specify which ts0 to use:

# echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-sched.sched_wakeup.$ts0 if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger

So we use the explicit sched.sched_wakeup.$ts0 to specify that we want
to use the ts0 on sched_wakeup for the calculation.

Note that the most common use case is to put the
wakeup_lat=common_timestamp.usecs-$ts0 expression on a trigger with an
onmatch() action, and onmatch() specifies the matching event, so there's
no need to explicitly use the fully qualified sched.sched_wakeup.$ts0 in
that case.  The above doesn't have onmatch(), and therefore has no way
to disambiguate the name without specifying which event explicitly.

> Anyway, I think it is a good chance to introduce <tracefs>/error_log file, since we have too many non-critical errors on operations. I feel that checking hist file by errors on trigger file is not a bit intuitive.
> 
> # cat /sys/kernel/debug/tracing/error_log
> ERROR(events/sched/sched_switch/trigger): Variable already defined: ts0@...ed:sched_wakeup
>   Command: keys=pid:ts0=common_timestamp.usecs if comm=="cyclictest"
> 
> This can be used from probe events too :) 
> e.g.
> 
> ERROR(kprobe_events): Unsupported type: uint8
>   Command: p vfs_read arg1=%di:uint8
> 
> Any thought?
> 

I agree - I think that would make more sense than using the hist files
for that purpose.  I'll work on adding this and getting rid of the hist
file error mechanism.

Thanks,

Tom

> Thank you,
> 
> 
> 


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ