linux-kernel - [PATCH 2/2] clk: at91: Fix for PLL set_rate changes not being actually written to PLL peripheral bits

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [day] [month] [year] [list]

Message-ID: <20180408094423.GA51702@hak8or>
Date:   Sun, 8 Apr 2018 05:44:23 -0400
From:   Marcin <marcin@...mianowicz.com>
To:     Boris Brezillon <boris.brezillon@...e-electrons.com>,
        Nicolas Ferre <nicolas.ferre@...rochip.com>,
        Alexandre Belloni <alexandre.belloni@...tlin.com>
Cc:     Michael Turquette <mturquette@...libre.com>,
        Stephen Boyd <sboyd@...nel.org>, linux-clk@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH 2/2] clk: at91: Fix for PLL set_rate changes not being
 actually written to PLL peripheral bits

When a USB device is connected to the USB host port on the SAM9N12 then
you get "-62" error which seems to indicate USB replies from the device
are timing out. Looking around, I saw the USB bus was running at half
speed. Going further, it seems that in ..._set_rate() the PLL wasn't
actually being adjusted. Writing the multiplier and divider values to
the peripheral fixes the bus running at half speed.

Signed-off-by: Marcin Ziemianowicz <marcin@...mianowicz.com>
---
 drivers/clk/at91/clk-pll.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/clk/at91/clk-pll.c b/drivers/clk/at91/clk-pll.c
index 534961766ae5..db7155fe9346 100644
--- a/drivers/clk/at91/clk-pll.c
+++ b/drivers/clk/at91/clk-pll.c
@@ -288,6 +288,14 @@ static int clk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
 	pll->div = div;
 	pll->mul = mul;
 
+	// Set the PLL as per above div and mil values.
+	regmap_update_bits(pll->regmap, AT91_CKGR_PLLBR,
+		AT91_PMC_DIV | AT91_PMC_MUL,
+		(div << 0) | (mul << 16));
+
+	pr_debug("clk-pll: setting new rate, (%lu hz / %u) * %u = %lu hz\n",
+		parent_rate, div, mul, rate);
+
 	return 0;
 }
 
-- 
2.16.3