[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180409001936.162706-106-alexander.levin@microsoft.com>
Date: Mon, 9 Apr 2018 00:21:19 +0000
From: Sasha Levin <Alexander.Levin@...rosoft.com>
To: "stable@...r.kernel.org" <stable@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
CC: Ed Swierk <eswierk@...portsystems.com>,
"David S . Miller" <davem@...emloft.net>,
Sasha Levin <Alexander.Levin@...rosoft.com>
Subject: [PATCH AUTOSEL for 4.14 106/161] openvswitch: Remove padding from
packet before L3+ conntrack processing
From: Ed Swierk <eswierk@...portsystems.com>
[ Upstream commit 9382fe71c0058465e942a633869629929102843d ]
IPv4 and IPv6 packets may arrive with lower-layer padding that is not
included in the L3 length. For example, a short IPv4 packet may have
up to 6 bytes of padding following the IP payload when received on an
Ethernet device with a minimum packet length of 64 bytes.
Higher-layer processing functions in netfilter (e.g. nf_ip_checksum(),
and help() in nf_conntrack_ftp) assume skb->len reflects the length of
the L3 header and payload, rather than referring back to
ip_hdr->tot_len or ipv6_hdr->payload_len, and get confused by
lower-layer padding.
In the normal IPv4 receive path, ip_rcv() trims the packet to
ip_hdr->tot_len before invoking netfilter hooks. In the IPv6 receive
path, ip6_rcv() does the same using ipv6_hdr->payload_len. Similarly
in the br_netfilter receive path, br_validate_ipv4() and
br_validate_ipv6() trim the packet to the L3 length before invoking
netfilter hooks.
Currently in the OVS conntrack receive path, ovs_ct_execute() pulls
the skb to the L3 header but does not trim it to the L3 length before
calling nf_conntrack_in(NF_INET_PRE_ROUTING). When
nf_conntrack_proto_tcp encounters a packet with lower-layer padding,
nf_ip_checksum() fails causing a "nf_ct_tcp: bad TCP checksum" log
message. While extra zero bytes don't affect the checksum, the length
in the IP pseudoheader does. That length is based on skb->len, and
without trimming, it doesn't match the length the sender used when
computing the checksum.
In ovs_ct_execute(), trim the skb to the L3 length before higher-layer
processing.
Signed-off-by: Ed Swierk <eswierk@...portsystems.com>
Acked-by: Pravin B Shelar <pshelar@....org>
Signed-off-by: David S. Miller <davem@...emloft.net>
Signed-off-by: Sasha Levin <alexander.levin@...rosoft.com>
---
net/openvswitch/conntrack.c | 34 ++++++++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/net/openvswitch/conntrack.c b/net/openvswitch/conntrack.c
index d558e882ca0c..285f8797c26a 100644
--- a/net/openvswitch/conntrack.c
+++ b/net/openvswitch/conntrack.c
@@ -1097,6 +1097,36 @@ static int ovs_ct_commit(struct net *net, struct sw_flow_key *key,
return 0;
}
+/* Trim the skb to the length specified by the IP/IPv6 header,
+ * removing any trailing lower-layer padding. This prepares the skb
+ * for higher-layer processing that assumes skb->len excludes padding
+ * (such as nf_ip_checksum). The caller needs to pull the skb to the
+ * network header, and ensure ip_hdr/ipv6_hdr points to valid data.
+ */
+static int ovs_skb_network_trim(struct sk_buff *skb)
+{
+ unsigned int len;
+ int err;
+
+ switch (skb->protocol) {
+ case htons(ETH_P_IP):
+ len = ntohs(ip_hdr(skb)->tot_len);
+ break;
+ case htons(ETH_P_IPV6):
+ len = sizeof(struct ipv6hdr)
+ + ntohs(ipv6_hdr(skb)->payload_len);
+ break;
+ default:
+ len = skb->len;
+ }
+
+ err = pskb_trim_rcsum(skb, len);
+ if (err)
+ kfree_skb(skb);
+
+ return err;
+}
+
/* Returns 0 on success, -EINPROGRESS if 'skb' is stolen, or other nonzero
* value if 'skb' is freed.
*/
@@ -1111,6 +1141,10 @@ int ovs_ct_execute(struct net *net, struct sk_buff *skb,
nh_ofs = skb_network_offset(skb);
skb_pull_rcsum(skb, nh_ofs);
+ err = ovs_skb_network_trim(skb);
+ if (err)
+ return err;
+
if (key->ip.frag != OVS_FRAG_TYPE_NONE) {
err = handle_fragments(net, key, info->zone.id, skb);
if (err)
--
2.15.1
Powered by blists - more mailing lists