[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1523349015-37985-1-git-send-email-michel.pollet@bp.renesas.com>
Date: Tue, 10 Apr 2018 09:30:00 +0100
From: Michel Pollet <michel.pollet@...renesas.com>
To: linux-renesas-soc@...r.kernel.org,
Simon Horman <horms@...ge.net.au>
Cc: phil.edworthy@...esas.com, buserror+upstream@...il.com,
Michel Pollet <michel.pollet@...renesas.com>,
Magnus Damm <magnus.damm@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Lee Jones <lee.jones@...aro.org>,
Russell King <linux@...linux.org.uk>,
Sebastian Reichel <sre@...nel.org>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-pm@...r.kernel.org
Subject: [PATCH v4 0/8] arm: Base support for Renesas RZN1D-DB Board
This series adds the plain basic support for booting a bare
kernel on the RZ/N1D-DB Board. It's been trimmed to the strict
minimum as a 'base', further patches that will add the
rest of the support, pinctrl, clock architecture and quite
a few others.
Thanks for the comments on the previous versions!
v4:
+ Fixes for suggestions by Simon Horman
+ Fixes for suggestions by Jacopo Mondi
+ Fixes for suggestions by Geert Uytterhoeven
+ Renamed the r9a06g0xx.dtsi file, given up on trying to get a family
common file in, so dropped potential RZ/N1S support and now only
focus on RZ/N1D for this patchset.
+ Added 'always-on' to the architected timer node, because it is.
+ Added ARCH_R9A06G032, to match others patterns like RCAR
+ Sorted the .dts files, added empty lines as required.
+ Fixed patch prefixes to match git-log for bindings&dts
+ Merged board .dts & Makefile changes together
+ Rebased on next-20180410
v3:
+ Fixes for suggestions by Geert Uytterhoeven
+ Removed SoC Specific renesas,r9a06g032-xxx, as it's not needed for now.
+ Kept renesas,rzn1 as a family/generic for this family.
+ Fixed a couple of the commit messages.
+ Added Geert's Reviewed-By where appropriate.
v2:
+ Fixes for suggestions by Simon Horman
+ Fixes for suggestions by Rob Herring
+ Fixes for suggestions by Geert Uytterhoeven
+ Removed the mach file
+ Added a MFD base for the sysctrl block
+ Added a regmap based sub driver for the reboot handler
+ Renamed the files to match shmobile conventions
+ Adapted the compatible= strings to reflect 'family' vs 'part'
distinction.
+ Removed the sysctrl.h file entirelly.
+ Fixed every warnings from the DTC compiler on W=12 mode.
+ Split the device-tree patches from the code.
Michel Pollet (8):
arm: shmobile: Add the RZ/N1 arch to the shmobile Kconfig
arm: shmobile: Add the RZ/N1D (R9A06G032) to the shmobile Kconfig
dt-bindings: mfd: renesas,rzn1-sysctrl: document RZ/N1 sysctrl node
dt-bindings: reset: renesas,rzn1-reboot: document RZ/N1 reboot driver
dt-bindings: arm: Document the RZN1D-DB board
ARM: dts: Renesas RZ/N1 SoC base device tree file
ARM: dts: Renesas RZN1D-DB Board base file
reset: Renesas RZ/N1 reboot driver
Documentation/devicetree/bindings/arm/shmobile.txt | 5 +-
.../bindings/mfd/renesas,rzn1-sysctrl.txt | 23 +++++
.../bindings/power/renesas,rzn1-reboot.txt | 23 +++++
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts | 29 ++++++
arch/arm/boot/dts/r9a06g032.dtsi | 94 ++++++++++++++++++
arch/arm/mach-shmobile/Kconfig | 9 ++
drivers/power/reset/Kconfig | 7 ++
drivers/power/reset/Makefile | 1 +
drivers/power/reset/rzn1-reboot.c | 105 +++++++++++++++++++++
10 files changed, 296 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/mfd/renesas,rzn1-sysctrl.txt
create mode 100644 Documentation/devicetree/bindings/power/renesas,rzn1-reboot.txt
create mode 100644 arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts
create mode 100644 arch/arm/boot/dts/r9a06g032.dtsi
create mode 100644 drivers/power/reset/rzn1-reboot.c
--
2.7.4
Powered by blists - more mailing lists