| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1523389127-14243-11-git-send-email-jollys@xilinx.com>
Date: Tue, 10 Apr 2018 12:38:46 -0700
From: Jolly Shah <jolly.shah@...inx.com>
To: <ard.biesheuvel@...aro.org>, <mingo@...nel.org>,
<gregkh@...uxfoundation.org>, <matt@...eblueprint.co.uk>,
<sudeep.holla@....com>, <hkallweit1@...il.com>,
<keescook@...omium.org>, <dmitry.torokhov@...il.com>,
<mturquette@...libre.com>, <sboyd@...eaurora.org>,
<michal.simek@...inx.com>, <robh+dt@...nel.org>,
<mark.rutland@....com>, <linux-clk@...r.kernel.org>
CC: <rajanv@...inx.com>, <linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
Jolly Shah <jollys@...inx.com>
Subject: [PATCH v6 10/11] dt-bindings: clock: Add bindings for ZynqMP clock driver
From: Rajan Vaja <rajanv@...inx.com>
Add documentation to describe Xilinx ZynqMP clock driver
bindings.
Signed-off-by: Rajan Vaja <rajanv@...inx.com>
Signed-off-by: Jolly Shah <jollys@...inx.com>
---
.../firmware/xilinx/xlnx,zynqmp-firmware.txt | 53 ++++++++++
include/dt-bindings/clock/xlnx,zynqmp-clk.h | 116 +++++++++++++++++++++
2 files changed, 169 insertions(+)
create mode 100644 include/dt-bindings/clock/xlnx,zynqmp-clk.h
diff --git a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
index 1b431d9..ee8d0b0 100644
--- a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
+++ b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
@@ -17,6 +17,53 @@ Required properties:
- "smc" : SMC #0, following the SMCCC
- "hvc" : HVC #0, following the SMCCC
+--------------------------------------------------------------------------
+Device Tree Clock bindings for the Zynq Ultrascale+ MPSoC controlled using
+Zynq MPSoC firmware interface
+--------------------------------------------------------------------------
+The clock controller is a h/w block of Zynq Ultrascale+ MPSoC clock
+tree. It reads required input clock frequencies from the devicetree and acts
+as clock provider for all clock consumers of PS clocks.
+
+See clock_bindings.txt for more information on the generic clock bindings.
+
+Required properties:
+ - #clock-cells: Must be 1
+ - compatible: Must contain: "xlnx,zynqmp-clk"
+ - clocks: List of clock specifiers which are external input
+ clocks to the given clock controller. Please refer
+ the next section to find the input clocks for a
+ given controller.
+ - clock-names: List of clock names which are exteral input clocks
+ to the given clock controller. Please refer to the
+ clock bindings for more details.
+
+Input clocks for zynqmp Ultrascale+ clock controller:
+
+The Zynq UltraScale+ MPSoC has one primary and four alternative reference clock
+inputs. These required clock inputs are:
+ - pss_ref_clk (PS reference clock)
+ - video_clk (reference clock for video system )
+ - pss_alt_ref_clk (alternative PS reference clock)
+ - aux_ref_clk
+ - gt_crx_ref_clk (transceiver reference clock)
+
+The following strings are optional parameters to the 'clock-names' property in
+order to provide an optional (E)MIO clock source:
+ - swdt0_ext_clk
+ - swdt1_ext_clk
+ - gem0_emio_clk
+ - gem1_emio_clk
+ - gem2_emio_clk
+ - gem3_emio_clk
+ - mio_clk_XX # with XX = 00..77
+ - mio_clk_50_or_51 #for the mux clock to gem tsu from 50 or 51
+
+
+Output clocks are registered based on clock information received
+from firmware. Output clocks indexes are mentioned in
+include/dt-bindings/clock/xlnx,zynqmp-clk.h.
+
-------
Example
-------
@@ -25,5 +72,11 @@ firmware {
zynqmp_firmware: zynqmp-firmware {
compatible = "xlnx,zynqmp-firmware";
method = "smc";
+ clk: clk {
+ #clock-cells = <1>;
+ compatible = "xlnx,zynqmp-clk";
+ clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>, <&aux_ref_clk>, <>_crx_ref_clk>;
+ clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk","aux_ref_clk", "gt_crx_ref_clk";
+ };
};
};
diff --git a/include/dt-bindings/clock/xlnx,zynqmp-clk.h b/include/dt-bindings/clock/xlnx,zynqmp-clk.h
new file mode 100644
index 0000000..4aebe6e
--- /dev/null
+++ b/include/dt-bindings/clock/xlnx,zynqmp-clk.h
@@ -0,0 +1,116 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Xilinx Zynq MPSoC Firmware layer
+ *
+ * Copyright (C) 2014-2018 Xilinx, Inc.
+ *
+ */
+
+#ifndef _DT_BINDINGS_CLK_ZYNQMP_H
+#define _DT_BINDINGS_CLK_ZYNQMP_H
+
+#define IOPLL 0
+#define RPLL 1
+#define APLL 2
+#define DPLL 3
+#define VPLL 4
+#define IOPLL_TO_FPD 5
+#define RPLL_TO_FPD 6
+#define APLL_TO_LPD 7
+#define DPLL_TO_LPD 8
+#define VPLL_TO_LPD 9
+#define ACPU 10
+#define ACPU_HALF 11
+#define DBF_FPD 12
+#define DBF_LPD 13
+#define DBG_TRACE 14
+#define DBG_TSTMP 15
+#define DP_VIDEO_REF 16
+#define DP_AUDIO_REF 17
+#define DP_STC_REF 18
+#define GDMA_REF 19
+#define DPDMA_REF 20
+#define DDR_REF 21
+#define SATA_REF 22
+#define PCIE_REF 23
+#define GPU_REF 24
+#define GPU_PP0_REF 25
+#define GPU_PP1_REF 26
+#define TOPSW_MAIN 27
+#define TOPSW_LSBUS 28
+#define GTGREF0_REF 29
+#define LPD_SWITCH 30
+#define LPD_LSBUS 31
+#define USB0_BUS_REF 32
+#define USB1_BUS_REF 33
+#define USB3_DUAL_REF 34
+#define USB0 35
+#define USB1 36
+#define CPU_R5 37
+#define CPU_R5_CORE 38
+#define CSU_SPB 39
+#define CSU_PLL 40
+#define PCAP 41
+#define IOU_SWITCH 42
+#define GEM_TSU_REF 43
+#define GEM_TSU 44
+#define GEM0_REF 45
+#define GEM1_REF 46
+#define GEM2_REF 47
+#define GEM3_REF 48
+#define GEM0_TX 49
+#define GEM1_TX 50
+#define GEM2_TX 51
+#define GEM3_TX 52
+#define QSPI_REF 53
+#define SDIO0_REF 54
+#define SDIO1_REF 55
+#define UART0_REF 56
+#define UART1_REF 57
+#define SPI0_REF 58
+#define SPI1_REF 59
+#define NAND_REF 60
+#define I2C0_REF 61
+#define I2C1_REF 62
+#define CAN0_REF 63
+#define CAN1_REF 64
+#define CAN0 65
+#define CAN1 66
+#define DLL_REF 67
+#define ADMA_REF 68
+#define TIMESTAMP_REF 69
+#define AMS_REF 70
+#define PL0_REF 71
+#define PL1_REF 72
+#define PL2_REF 73
+#define PL3_REF 74
+#define WDT 75
+#define IOPLL_INT 76
+#define IOPLL_PRE_SRC 77
+#define IOPLL_HALF 78
+#define IOPLL_INT_MUX 79
+#define IOPLL_POST_SRC 80
+#define RPLL_INT 81
+#define RPLL_PRE_SRC 82
+#define RPLL_HALF 83
+#define RPLL_INT_MUX 84
+#define RPLL_POST_SRC 85
+#define APLL_INT 86
+#define APLL_PRE_SRC 87
+#define APLL_HALF 88
+#define APLL_INT_MUX 89
+#define APLL_POST_SRC 90
+#define DPLL_INT 91
+#define DPLL_PRE_SRC 92
+#define DPLL_HALF 93
+#define DPLL_INT_MUX 94
+#define DPLL_POST_SRC 95
+#define VPLL_INT 96
+#define VPLL_PRE_SRC 97
+#define VPLL_HALF 98
+#define VPLL_INT_MUX 99
+#define VPLL_POST_SRC 100
+#define CAN0_MIO 101
+#define CAN1_MIO 102
+
+#endif
--
2.7.4
Powered by blists - more mailing lists