| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1523389127-14243-12-git-send-email-jollys@xilinx.com>
Date: Tue, 10 Apr 2018 12:38:47 -0700
From: Jolly Shah <jolly.shah@...inx.com>
To: <ard.biesheuvel@...aro.org>, <mingo@...nel.org>,
<gregkh@...uxfoundation.org>, <matt@...eblueprint.co.uk>,
<sudeep.holla@....com>, <hkallweit1@...il.com>,
<keescook@...omium.org>, <dmitry.torokhov@...il.com>,
<mturquette@...libre.com>, <sboyd@...eaurora.org>,
<michal.simek@...inx.com>, <robh+dt@...nel.org>,
<mark.rutland@....com>, <linux-clk@...r.kernel.org>
CC: <rajanv@...inx.com>, <linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
Jolly Shah <jollys@...inx.com>,
Tejas Patel <tejasp@...inx.com>,
Shubhrajyoti Datta <shubhrajyoti.datta@...inx.com>
Subject: [PATCH v6 11/11] drivers: clk: Add ZynqMP clock driver
This patch adds CCF compliant clock driver for ZynqMP.
Clock driver queries supported clock information from
firmware and regiters pll and output clocks with CCF.
Signed-off-by: Rajan Vaja <rajanv@...inx.com>
Signed-off-by: Tejas Patel <tejasp@...inx.com>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@...inx.com>
Signed-off-by: Jolly Shah <jollys@...inx.com>
---
drivers/clk/Kconfig | 1 +
drivers/clk/Makefile | 1 +
drivers/clk/zynqmp/Kconfig | 11 +
drivers/clk/zynqmp/Makefile | 4 +
drivers/clk/zynqmp/clk-gate-zynqmp.c | 146 +++++++
drivers/clk/zynqmp/clk-mux-zynqmp.c | 150 +++++++
drivers/clk/zynqmp/clk-zynqmp.h | 53 +++
drivers/clk/zynqmp/clkc.c | 737 +++++++++++++++++++++++++++++++++++
drivers/clk/zynqmp/divider.c | 219 +++++++++++
drivers/clk/zynqmp/pll.c | 345 ++++++++++++++++
10 files changed, 1667 insertions(+)
create mode 100644 drivers/clk/zynqmp/Kconfig
create mode 100644 drivers/clk/zynqmp/Makefile
create mode 100644 drivers/clk/zynqmp/clk-gate-zynqmp.c
create mode 100644 drivers/clk/zynqmp/clk-mux-zynqmp.c
create mode 100644 drivers/clk/zynqmp/clk-zynqmp.h
create mode 100644 drivers/clk/zynqmp/clkc.c
create mode 100644 drivers/clk/zynqmp/divider.c
create mode 100644 drivers/clk/zynqmp/pll.c
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 7ae23b2..a925d71 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -262,6 +262,7 @@ source "drivers/clk/sprd/Kconfig"
source "drivers/clk/sunxi-ng/Kconfig"
source "drivers/clk/tegra/Kconfig"
source "drivers/clk/ti/Kconfig"
+source "drivers/clk/zynqmp/Kconfig"
source "drivers/clk/uniphier/Kconfig"
endmenu
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 6605513..f3be61b 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -101,3 +101,4 @@ obj-$(CONFIG_X86) += x86/
endif
obj-$(CONFIG_ARCH_ZX) += zte/
obj-$(CONFIG_ARCH_ZYNQ) += zynq/
+obj-$(CONFIG_COMMON_CLK_ZYNQMP) += zynqmp/
diff --git a/drivers/clk/zynqmp/Kconfig b/drivers/clk/zynqmp/Kconfig
new file mode 100644
index 0000000..fe815f7
--- /dev/null
+++ b/drivers/clk/zynqmp/Kconfig
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config COMMON_CLK_ZYNQMP
+ bool "Support for Xilinx ZynqMP Ultrascale+ clock controllers"
+ depends on OF
+ depends on ARCH_ZYNQMP || COMPILE_TEST
+ depends on ZYNQMP_FIRMWARE
+ help
+ Support for the Zynqmp Ultrascale clock controller.
+ It has a dependency on the PMU firmware.
+ Say Y if you want to support clock support
diff --git a/drivers/clk/zynqmp/Makefile b/drivers/clk/zynqmp/Makefile
new file mode 100644
index 0000000..0ec24bf
--- /dev/null
+++ b/drivers/clk/zynqmp/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+# Zynq Ultrascale+ MPSoC clock specific Makefile
+
+obj-$(CONFIG_ARCH_ZYNQMP) += pll.o clk-gate-zynqmp.o divider.o clk-mux-zynqmp.o clkc.o
diff --git a/drivers/clk/zynqmp/clk-gate-zynqmp.c b/drivers/clk/zynqmp/clk-gate-zynqmp.c
new file mode 100644
index 0000000..b927eb1
--- /dev/null
+++ b/drivers/clk/zynqmp/clk-gate-zynqmp.c
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Zynq UltraScale+ MPSoC clock controller
+ *
+ * Copyright (C) 2016-2018 Xilinx
+ *
+ * Gated clock implementation
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include "clk-zynqmp.h"
+
+/**
+ * struct clk_gate - gating clock
+ * @hw: handle between common and hardware-specific interfaces
+ * @flags: hardware-specific flags
+ * @clk_id: Id of clock
+ */
+struct zynqmp_clk_gate {
+ struct clk_hw hw;
+ u8 flags;
+ u32 clk_id;
+};
+
+#define to_zynqmp_clk_gate(_hw) container_of(_hw, struct zynqmp_clk_gate, hw)
+
+/**
+ * zynqmp_clk_gate_enable() - Enable clock
+ * @hw: handle between common and hardware-specific interfaces
+ *
+ * Return: 0 on success else error code
+ */
+static int zynqmp_clk_gate_enable(struct clk_hw *hw)
+{
+ struct zynqmp_clk_gate *gate = to_zynqmp_clk_gate(hw);
+ const char *clk_name = clk_hw_get_name(hw);
+ u32 clk_id = gate->clk_id;
+ int ret;
+ const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+ ret = eemi_ops->clock_enable(clk_id);
+
+ if (ret)
+ pr_warn_once("%s() clock enabled failed for %s, ret = %d\n",
+ __func__, clk_name, ret);
+
+ return ret;
+}
+
+/*
+ * zynqmp_clk_gate_disable() - Disable clock
+ * @hw: handle between common and hardware-specific interfaces
+ */
+static void zynqmp_clk_gate_disable(struct clk_hw *hw)
+{
+ struct zynqmp_clk_gate *gate = to_zynqmp_clk_gate(hw);
+ const char *clk_name = clk_hw_get_name(hw);
+ u32 clk_id = gate->clk_id;
+ int ret;
+ const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+ ret = eemi_ops->clock_disable(clk_id);
+
+ if (ret)
+ pr_warn_once("%s() clock disable failed for %s, ret = %d\n",
+ __func__, clk_name, ret);
+}
+
+/**
+ * zynqmp_clk_gate_is_enable() - Check clock state
+ * @hw: handle between common and hardware-specific interfaces
+ *
+ * Return: 1 if enabled, 0 if disabled else error code
+ */
+static int zynqmp_clk_gate_is_enabled(struct clk_hw *hw)
+{
+ struct zynqmp_clk_gate *gate = to_zynqmp_clk_gate(hw);
+ const char *clk_name = clk_hw_get_name(hw);
+ u32 clk_id = gate->clk_id;
+ int state, ret;
+ const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+ ret = eemi_ops->clock_getstate(clk_id, &state);
+ if (ret) {
+ pr_warn_once("%s() clock get state failed for %s, ret = %d\n",
+ __func__, clk_name, ret);
+ return -EIO;
+ }
+
+ return state ? 1 : 0;
+}
+
+const struct clk_ops zynqmp_clk_gate_ops = {
+ .enable = zynqmp_clk_gate_enable,
+ .disable = zynqmp_clk_gate_disable,
+ .is_enabled = zynqmp_clk_gate_is_enabled,
+};
+EXPORT_SYMBOL_GPL(zynqmp_clk_gate_ops);
+
+/**
+ * zynqmp_clk_register_gate() - register a gate clock with the clock framework
+ * @dev: device that is registering this clock
+ * @name: name of this clock
+ * @clk_id: Id of this clock
+ * @parent: name of this clock's parent
+ * @flags: framework-specific flags for this clock
+ * @clk_gate_flags: gate-specific flags for this clock
+ *
+ * Return: clock hardware of the registered clock gate
+ */
+struct clk_hw *zynqmp_clk_register_gate(struct device *dev, const char *name,
+ u32 clk_id, const char *parent,
+ unsigned long flags,
+ u8 clk_gate_flags)
+{
+ struct zynqmp_clk_gate *gate;
+ struct clk_hw *hw;
+ int ret;
+ struct clk_init_data init;
+
+ /* allocate the gate */
+ gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+ if (!gate)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &zynqmp_clk_gate_ops;
+ init.flags = flags;
+ init.parent_names = &parent;
+ init.num_parents = 1;
+
+ /* struct clk_gate assignments */
+ gate->flags = clk_gate_flags;
+ gate->hw.init = &init;
+ gate->clk_id = clk_id;
+
+ hw = &gate->hw;
+ ret = clk_hw_register(dev, hw);
+ if (ret) {
+ kfree(gate);
+ hw = ERR_PTR(ret);
+ }
+
+ return hw;
+}
diff --git a/drivers/clk/zynqmp/clk-mux-zynqmp.c b/drivers/clk/zynqmp/clk-mux-zynqmp.c
new file mode 100644
index 0000000..a0b452d
--- /dev/null
+++ b/drivers/clk/zynqmp/clk-mux-zynqmp.c
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Zynq UltraScale+ MPSoC mux
+ *
+ * Copyright (C) 2016-2018 Xilinx
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include "clk-zynqmp.h"
+
+/*
+ * DOC: basic adjustable multiplexer clock that cannot gate
+ *
+ * Traits of this clock:
+ * prepare - clk_prepare only ensures that parents are prepared
+ * enable - clk_enable only ensures that parents are enabled
+ * rate - rate is only affected by parent switching. No clk_set_rate support
+ * parent - parent is adjustable through clk_set_parent
+ */
+
+/**
+ * struct zynqmp_clk_mux - multiplexer clock
+ *
+ * @hw: handle between common and hardware-specific interfaces
+ * @flags: hardware-specific flags
+ * @clk_id: Id of clock
+ */
+struct zynqmp_clk_mux {
+ struct clk_hw hw;
+ u8 flags;
+ u32 clk_id;
+};
+
+#define to_zynqmp_clk_mux(_hw) container_of(_hw, struct zynqmp_clk_mux, hw)
+
+/**
+ * zynqmp_clk_mux_get_parent() - Get parent of clock
+ * @hw: handle between common and hardware-specific interfaces
+ *
+ * Return: Parent index
+ */
+static u8 zynqmp_clk_mux_get_parent(struct clk_hw *hw)
+{
+ struct zynqmp_clk_mux *mux = to_zynqmp_clk_mux(hw);
+ const char *clk_name = clk_hw_get_name(hw);
+ u32 clk_id = mux->clk_id;
+ u32 val;
+ int ret;
+ const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+ ret = eemi_ops->clock_getparent(clk_id, &val);
+
+ if (ret)
+ pr_warn_once("%s() getparent failed for clock: %s, ret = %d\n",
+ __func__, clk_name, ret);
+
+ return val;
+}
+
+/**
+ * zynqmp_clk_mux_set_parent() - Set parent of clock
+ * @hw: handle between common and hardware-specific interfaces
+ * @index: Parent index
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_clk_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct zynqmp_clk_mux *mux = to_zynqmp_clk_mux(hw);
+ const char *clk_name = clk_hw_get_name(hw);
+ u32 clk_id = mux->clk_id;
+ int ret;
+ const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+ ret = eemi_ops->clock_setparent(clk_id, index);
+
+ if (ret)
+ pr_warn_once("%s() set parent failed for clock: %s, ret = %d\n",
+ __func__, clk_name, ret);
+
+ return ret;
+}
+
+const struct clk_ops zynqmp_clk_mux_ops = {
+ .get_parent = zynqmp_clk_mux_get_parent,
+ .set_parent = zynqmp_clk_mux_set_parent,
+ .determine_rate = __clk_mux_determine_rate,
+};
+EXPORT_SYMBOL_GPL(zynqmp_clk_mux_ops);
+
+const struct clk_ops zynqmp_clk_mux_ro_ops = {
+ .get_parent = zynqmp_clk_mux_get_parent,
+};
+EXPORT_SYMBOL_GPL(zynqmp_clk_mux_ro_ops);
+
+/**
+ * zynqmp_clk_register_mux() - register a mux table with the clock
+ * framework
+ * @dev: device that is registering this clock
+ * @name: name of this clock
+ * @clk_id: Id of this clock
+ * @parents: name of this clock's parents
+ * @num_parents: number of parents
+ * @flags: framework-specific flags for this clock
+ * @clk_mux_flags: mux-specific flags for this clock
+ *
+ * Return: clock hardware of the registered clock mux
+ */
+struct clk_hw *zynqmp_clk_register_mux(struct device *dev, const char *name,
+ u32 clk_id,
+ const char * const *parents,
+ u8 num_parents,
+ unsigned long flags,
+ u8 clk_mux_flags)
+{
+ struct zynqmp_clk_mux *mux;
+ struct clk_hw *hw;
+ struct clk_init_data init;
+ int ret;
+
+ /* allocate the mux */
+ mux = kzalloc(sizeof(*mux), GFP_KERNEL);
+ if (!mux)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ if (clk_mux_flags & CLK_MUX_READ_ONLY)
+ init.ops = &zynqmp_clk_mux_ro_ops;
+ else
+ init.ops = &zynqmp_clk_mux_ops;
+ init.flags = flags;
+ init.parent_names = parents;
+ init.num_parents = num_parents;
+
+ /* struct clk_mux assignments */
+ mux->flags = clk_mux_flags;
+ mux->hw.init = &init;
+ mux->clk_id = clk_id;
+
+ hw = &mux->hw;
+ ret = clk_hw_register(dev, hw);
+ if (ret) {
+ kfree(hw);
+ hw = ERR_PTR(ret);
+ }
+
+ return hw;
+}
+EXPORT_SYMBOL_GPL(zynqmp_clk_register_mux);
diff --git a/drivers/clk/zynqmp/clk-zynqmp.h b/drivers/clk/zynqmp/clk-zynqmp.h
new file mode 100644
index 0000000..57e81d45
--- /dev/null
+++ b/drivers/clk/zynqmp/clk-zynqmp.h
@@ -0,0 +1,53 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2016-2018 Xilinx
+ */
+
+#ifndef __LINUX_CLK_ZYNQMP_H_
+#define __LINUX_CLK_ZYNQMP_H_
+
+#include <linux/spinlock.h>
+
+#include <linux/firmware/xlnx-zynqmp.h>
+
+/* Clock APIs payload parameters */
+#define CLK_GET_NAME_RESP_LEN 16
+#define CLK_GET_TOPOLOGY_RESP_WORDS 3
+#define CLK_GET_PARENTS_RESP_WORDS 3
+#define CLK_GET_ATTR_RESP_WORDS 1
+
+enum topology_type {
+ TYPE_INVALID,
+ TYPE_MUX,
+ TYPE_PLL,
+ TYPE_FIXEDFACTOR,
+ TYPE_DIV1,
+ TYPE_DIV2,
+ TYPE_GATE,
+};
+
+struct clk_hw *zynqmp_clk_register_pll(struct device *dev, const char *name,
+ u32 clk_id,
+ const char *parent,
+ unsigned long flag);
+
+struct clk_hw *zynqmp_clk_register_gate(struct device *dev, const char *name,
+ u32 clk_id,
+ const char *parent,
+ unsigned long flags,
+ u8 clk_gate_flags);
+
+struct clk_hw *zynqmp_clk_register_divider(struct device *dev,
+ const char *name,
+ u32 clk_id, u32 div_type,
+ const char *parent,
+ unsigned long flags,
+ u8 clk_divider_flags);
+
+struct clk_hw *zynqmp_clk_register_mux(struct device *dev, const char *name,
+ u32 clk_id,
+ const char * const *parents,
+ u8 num_parents,
+ unsigned long flags,
+ u8 clk_mux_flags);
+#endif
diff --git a/drivers/clk/zynqmp/clkc.c b/drivers/clk/zynqmp/clkc.c
new file mode 100644
index 0000000..f27bd7f
--- /dev/null
+++ b/drivers/clk/zynqmp/clkc.c
@@ -0,0 +1,737 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Zynq UltraScale+ MPSoC clock controller
+ *
+ * Copyright (C) 2016-2018 Xilinx
+ *
+ * Based on drivers/clk/zynq/clkc.c
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+
+#include "clk-zynqmp.h"
+
+#define MAX_PARENT 100
+#define MAX_NODES 6
+#define MAX_NAME_LEN 50
+#define MAX_CLOCK 300
+
+#define CLK_INIT_ENABLE_SHIFT 1
+#define CLK_TYPE_SHIFT 2
+
+#define PM_API_PAYLOAD_LEN 3
+
+#define NA_PARENT 0xFFFFFFFF
+#define DUMMY_PARENT 0xFFFFFFFE
+
+#define CLK_TYPE_FIELD_LEN 4
+#define CLK_TOPOLOGY_NODE_OFFSET 16
+#define NODES_PER_RESP 3
+
+#define CLK_TYPE_FIELD_MASK 0xF
+#define CLK_FLAG_FIELD_MASK GENMASK(21, 8)
+#define CLK_TYPE_FLAG_FIELD_MASK GENMASK(31, 24)
+
+#define CLK_PARENTS_ID_LEN 16
+#define CLK_PARENTS_ID_MASK 0xFFFF
+
+/* Flags for parents */
+#define PARENT_CLK_SELF 0
+#define PARENT_CLK_NODE1 1
+#define PARENT_CLK_NODE2 2
+#define PARENT_CLK_NODE3 3
+#define PARENT_CLK_NODE4 4
+#define PARENT_CLK_EXTERNAL 5
+
+#define END_OF_CLK_NAME "END_OF_CLK"
+#define RESERVED_CLK_NAME ""
+
+#define CLK_VALID_MASK 0x1
+#define CLK_INIT_ENABLE_MASK (0x1 << CLK_INIT_ENABLE_SHIFT)
+
+enum clk_type {
+ CLK_TYPE_OUTPUT,
+ CLK_TYPE_EXTERNAL,
+};
+
+/**
+ * struct clock_parent - Structure for parent of clock
+ * @name: Parent name
+ * @id: Parent clock ID
+ * @flag: Parent flags
+ */
+struct clock_parent {
+ char name[MAX_NAME_LEN];
+ int id;
+ u32 flag;
+};
+
+/**
+ * struct clock_topology - Structure for topology of clock
+ * @type: Type of topology
+ * @flag: Topology flags
+ * @type_flag: Topology type specific flag
+ */
+struct clock_topology {
+ u32 type;
+ u32 flag;
+ u32 type_flag;
+};
+
+/**
+ * struct zynqmp_clock - Structure for clock
+ * @clk_name: Clock name
+ * @valid: Validity flag of clock
+ * @init_enable: init_enable flag of clock
+ * @type: Clock type (Output/External)
+ * @node: Clock tolology nodes
+ * @num_nodes: Number of nodes present in topology
+ * @parent: structure of parent of clock
+ * @num_parents: Number of parents of clock
+ */
+struct zynqmp_clock {
+ char clk_name[MAX_NAME_LEN];
+ u32 valid;
+ u32 init_enable;
+ enum clk_type type;
+ struct clock_topology node[MAX_NODES];
+ u32 num_nodes;
+ struct clock_parent parent[MAX_PARENT];
+ u32 num_parents;
+};
+
+static const char clk_type_postfix[][10] = {
+ [TYPE_INVALID] = "",
+ [TYPE_MUX] = "_mux",
+ [TYPE_GATE] = "",
+ [TYPE_DIV1] = "_div1",
+ [TYPE_DIV2] = "_div2",
+ [TYPE_FIXEDFACTOR] = "_ff",
+ [TYPE_PLL] = ""
+};
+
+static struct zynqmp_clock clock[MAX_CLOCK];
+static struct clk_hw_onecell_data *zynqmp_data;
+static unsigned int clock_max_idx;
+static const struct zynqmp_eemi_ops *eemi_ops;
+
+/**
+ * zynqmp_is_valid_clock() - Check whether clock is valid or not
+ * @clk_id: Clock index
+ * @valid: 1: if clock is valid
+ * 0: invalid clock
+ *
+ * Return: 0 on success else error code
+ */
+static int zynqmp_is_valid_clock(u32 clk_id, u32 *valid)
+{
+ if (clk_id > clock_max_idx)
+ return -ENODEV;
+
+ *valid = clock[clk_id].valid;
+
+ return *valid ? 0 : -EINVAL;
+}
+
+/**
+ * zynqmp_get_clock_name() - Get name of clock from Clock index
+ * @clk_id: Clock index
+ * @clk_name: Name of clock
+ *
+ * Return: 0 on success else error code
+ */
+static int zynqmp_get_clock_name(u32 clk_id, char *clk_name)
+{
+ int ret;
+ u32 valid;
+
+ ret = zynqmp_is_valid_clock(clk_id, &valid);
+ if (!ret && valid) {
+ strncpy(clk_name, clock[clk_id].clk_name, MAX_NAME_LEN);
+ return ret;
+ } else {
+ return ret;
+ }
+}
+
+/**
+ * zynqmp_get_clock_type() - Get type of clock
+ * @clk_id: Clock index
+ * @type: Clock type: CLK_TYPE_OUTPUT or CLK_TYPE_EXTERNAL
+ *
+ * Return: 0 on success else error code
+ */
+static int zynqmp_get_clock_type(u32 clk_id, u32 *type)
+{
+ int ret;
+ u32 valid;
+
+ ret = zynqmp_is_valid_clock(clk_id, &valid);
+ if (!ret && valid) {
+ *type = clock[clk_id].type;
+ return ret;
+ } else {
+ return ret;
+ }
+}
+
+/**
+ * zynqmp_pm_clock_get_name() - Get the name of clock for given id
+ * @clock_id: ID of the clock to be queried
+ * @name: Name of given clock
+ *
+ * This function is used to get name of clock specified by given
+ * clock ID.
+ *
+ * Return: Returns 0, in case of error name would be 0
+ */
+static int zynqmp_pm_clock_get_name(u32 clock_id, char *name)
+{
+ struct zynqmp_pm_query_data qdata = {0};
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+
+ qdata.qid = PM_QID_CLOCK_GET_NAME;
+ qdata.arg1 = clock_id;
+
+ eemi_ops->query_data(qdata, ret_payload);
+ memcpy(name, ret_payload, CLK_GET_NAME_RESP_LEN);
+
+ return 0;
+}
+
+/**
+ * zynqmp_pm_clock_get_topology() - Get the topology of clock for given id
+ * @clock_id: ID of the clock to be queried
+ * @index: Node index of clock topology
+ * @topology: Buffer to store nodes in topology and flags
+ *
+ * This function is used to get topology information for the clock
+ * specified by given clock ID.
+ *
+ * This API will return 3 node of topology with a single response. To get
+ * other nodes, master should call same API in loop with new
+ * index till error is returned. E.g First call should have
+ * index 0 which will return nodes 0,1 and 2. Next call, index
+ * should be 3 which will return nodes 3,4 and 5 and so on.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_clock_get_topology(u32 clock_id, u32 index, u32 *topology)
+{
+ struct zynqmp_pm_query_data qdata = {0};
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ qdata.qid = PM_QID_CLOCK_GET_TOPOLOGY;
+ qdata.arg1 = clock_id;
+ qdata.arg2 = index;
+
+ ret = eemi_ops->query_data(qdata, ret_payload);
+ memcpy(topology, &ret_payload[1], CLK_GET_TOPOLOGY_RESP_WORDS * 4);
+
+ return ret;
+}
+
+/**
+ * zynqmp_pm_clock_get_fixedfactor_params() - Get clock's fixed factor params
+ * @clock_id: Clock ID
+ * @mul: Multiplication value
+ * @div: Divisor value
+ *
+ * This function is used to get fixed factor parameters for the fixed
+ * clock. This API is applicable only for the fixed clock.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_clock_get_fixedfactor_params(u32 clock_id,
+ u32 *mul,
+ u32 *div)
+{
+ struct zynqmp_pm_query_data qdata = {0};
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ qdata.qid = PM_QID_CLOCK_GET_FIXEDFACTOR_PARAMS;
+ qdata.arg1 = clock_id;
+
+ ret = eemi_ops->query_data(qdata, ret_payload);
+ *mul = ret_payload[1];
+ *div = ret_payload[2];
+
+ return ret;
+}
+
+/**
+ * zynqmp_pm_clock_get_parents() - Get the first 3 parents of clock for given id
+ * @clock_id: Clock ID
+ * @index: Parent index
+ * @parents: 3 parents of the given clock
+ *
+ * This function is used to get 3 parents for the clock specified by
+ * given clock ID.
+ *
+ * This API will return 3 parents with a single response. To get
+ * other parents, master should call same API in loop with new
+ * parent index till error is returned. E.g First call should have
+ * index 0 which will return parents 0,1 and 2. Next call, index
+ * should be 3 which will return parent 3,4 and 5 and so on.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_clock_get_parents(u32 clock_id, u32 index, u32 *parents)
+{
+ struct zynqmp_pm_query_data qdata = {0};
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ qdata.qid = PM_QID_CLOCK_GET_PARENTS;
+ qdata.arg1 = clock_id;
+ qdata.arg2 = index;
+
+ ret = eemi_ops->query_data(qdata, ret_payload);
+ memcpy(parents, &ret_payload[1], CLK_GET_PARENTS_RESP_WORDS * 4);
+
+ return ret;
+}
+
+/**
+ * zynqmp_pm_clock_get_attributes() - Get the attributes of clock for given id
+ * @clock_id: Clock ID
+ * @attr: Clock attributes
+ *
+ * This function is used to get clock's attributes(e.g. valid, clock type, etc).
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_clock_get_attributes(u32 clock_id, u32 *attr)
+{
+ struct zynqmp_pm_query_data qdata = {0};
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ qdata.qid = PM_QID_CLOCK_GET_ATTRIBUTES;
+ qdata.arg1 = clock_id;
+
+ ret = eemi_ops->query_data(qdata, ret_payload);
+ memcpy(attr, &ret_payload[1], CLK_GET_ATTR_RESP_WORDS * 4);
+
+ return ret;
+}
+
+/**
+ * zynqmp_clock_get_topology() - Get topology of clock from firmware using
+ * PM_API
+ * @clk_id: Clock index
+ * @clk_topology: Structure of clock topology
+ * @num_nodes: number of nodes
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_clock_get_topology(u32 clk_id,
+ struct clock_topology *clk_topology,
+ u32 *num_nodes)
+{
+ int j, k = 0, ret;
+ u32 pm_resp[PM_API_PAYLOAD_LEN] = {0};
+
+ *num_nodes = 0;
+ for (j = 0; j <= MAX_NODES; j += 3) {
+ ret = zynqmp_pm_clock_get_topology(clk_id, j, pm_resp);
+ if (ret)
+ return ret;
+ for (k = 0; k < PM_API_PAYLOAD_LEN; k++) {
+ if (!(pm_resp[k] & CLK_TYPE_FIELD_MASK))
+ return 0;
+ clk_topology[*num_nodes].type = pm_resp[k] &
+ CLK_TYPE_FIELD_MASK;
+ clk_topology[*num_nodes].flag =
+ FIELD_GET(CLK_FLAG_FIELD_MASK,
+ pm_resp[k]);
+ clk_topology[*num_nodes].type_flag =
+ FIELD_GET(CLK_TYPE_FLAG_FIELD_MASK,
+ pm_resp[k]);
+ (*num_nodes)++;
+ }
+ }
+ return 0;
+}
+
+/**
+ * zynqmp_clock_get_parents() - Get parents info from firmware using PM_API
+ * @clk_id: Clock index
+ * @parents: Structure of parent information
+ * @num_parents: Total number of parents
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_clock_get_parents(u32 clk_id, struct clock_parent *parents,
+ u32 *num_parents)
+{
+ int j = 0, k, ret, total_parents = 0;
+ u32 pm_resp[PM_API_PAYLOAD_LEN] = {0};
+ struct clock_parent *parent;
+
+ do {
+ /* Get parents from firmware */
+ ret = zynqmp_pm_clock_get_parents(clk_id, j, pm_resp);
+ if (ret)
+ return ret;
+
+ for (k = 0; k < PM_API_PAYLOAD_LEN; k++) {
+ if (pm_resp[k] == NA_PARENT) {
+ *num_parents = total_parents;
+ return 0;
+ }
+
+ parent = &parents[k + j];
+ parent->id = pm_resp[k] & CLK_PARENTS_ID_MASK;
+ if (pm_resp[k] == DUMMY_PARENT) {
+ strcpy(parent->name, "dummy_name");
+ parent->flag = 0;
+ } else {
+ parent->flag = pm_resp[k] >>
+ CLK_PARENTS_ID_LEN;
+ if (zynqmp_get_clock_name(parent->id,
+ parent->name))
+ continue;
+ }
+ total_parents++;
+ }
+ j += PM_API_PAYLOAD_LEN;
+ } while (total_parents <= MAX_PARENT);
+ return 0;
+}
+
+/**
+ * zynqmp_get_parent_list() - Create list of parents name
+ * @np: Device node
+ * @clk_id: Clock index
+ * @parent_list: List of parent's name
+ * @num_parents: Total number of parents
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_get_parent_list(struct device_node *np, u32 clk_id,
+ const char **parent_list, u32 *num_parents)
+{
+ int i = 0, ret;
+ u32 total_parents = clock[clk_id].num_parents;
+ struct clock_topology *clk_nodes;
+ struct clock_parent *parents;
+
+ clk_nodes = clock[clk_id].node;
+ parents = clock[clk_id].parent;
+
+ for (i = 0; i < total_parents; i++) {
+ if (!parents[i].flag) {
+ parent_list[i] = parents[i].name;
+ } else if (parents[i].flag == PARENT_CLK_EXTERNAL) {
+ ret = of_property_match_string(np, "clock-names",
+ parents[i].name);
+ if (ret < 0)
+ strcpy(parents[i].name, "dummy_name");
+ parent_list[i] = parents[i].name;
+ } else {
+ strcat(parents[i].name,
+ clk_type_postfix[clk_nodes[parents[i].flag - 1].
+ type]);
+ parent_list[i] = parents[i].name;
+ }
+ }
+
+ *num_parents = total_parents;
+ return 0;
+}
+
+/**
+ * zynqmp_register_clk_topology() - Register clock topology
+ * @clk_id: Clock index
+ * @clk_name: Clock Name
+ * @num_parents: Total number of parents
+ * @parent_names: List of parents name
+ *
+ * Return: Returns either clock hardware or error+reason
+ */
+static struct clk_hw *zynqmp_register_clk_topology(int clk_id, char *clk_name,
+ int num_parents,
+ const char **parent_names)
+{
+ int j, ret;
+ u32 num_nodes, mult, div;
+ char *clk_out = NULL;
+ struct clock_topology *nodes;
+ struct clk_hw *hw = NULL;
+
+ nodes = clock[clk_id].node;
+ num_nodes = clock[clk_id].num_nodes;
+
+ for (j = 0; j < num_nodes; j++) {
+ /*
+ * Clock name received from firmware is output clock name.
+ * Intermediate clock names are postfixed with type of clock.
+ */
+ if (j != (num_nodes - 1)) {
+ clk_out = kasprintf(GFP_KERNEL, "%s%s", clk_name,
+ clk_type_postfix[nodes[j].type]);
+ } else {
+ clk_out = kasprintf(GFP_KERNEL, "%s", clk_name);
+ }
+
+ switch (nodes[j].type) {
+ case TYPE_MUX:
+ hw = zynqmp_clk_register_mux(NULL, clk_out,
+ clk_id, parent_names,
+ num_parents,
+ nodes[j].flag,
+ nodes[j].type_flag);
+ break;
+ case TYPE_PLL:
+ hw = zynqmp_clk_register_pll(NULL, clk_out, clk_id,
+ parent_names[0],
+ nodes[j].flag);
+ break;
+ case TYPE_FIXEDFACTOR:
+ ret = zynqmp_pm_clock_get_fixedfactor_params(clk_id,
+ &mult,
+ &div);
+ hw = clk_hw_register_fixed_factor(NULL, clk_out,
+ parent_names[0],
+ nodes[j].flag, mult,
+ div);
+ break;
+ case TYPE_DIV1:
+ case TYPE_DIV2:
+ hw = zynqmp_clk_register_divider(NULL, clk_out, clk_id,
+ nodes[j].type,
+ parent_names[0],
+ nodes[j].flag,
+ nodes[j].type_flag);
+ break;
+ case TYPE_GATE:
+
+ hw = zynqmp_clk_register_gate(NULL, clk_out, clk_id,
+ parent_names[0],
+ nodes[j].flag,
+ nodes[j].type_flag);
+ break;
+ default:
+ pr_err("%s() Unknown topology for %s\n",
+ __func__, clk_out);
+ break;
+ }
+ if (IS_ERR(hw))
+ pr_warn_once("%s() %s register fail with %ld\n",
+ __func__, clk_name, PTR_ERR(hw));
+
+ parent_names[0] = clk_out;
+ }
+ kfree(clk_out);
+ return hw;
+}
+
+/**
+ * zynqmp_register_clocks() - Register clocks
+ * @np: Device node
+ *
+ * Return: 0 on success else error code
+ */
+static int zynqmp_register_clocks(struct device_node *np)
+{
+ int ret;
+ u32 i, total_parents = 0, type = 0;
+ const char *parent_names[MAX_PARENT];
+
+ for (i = 0; i < clock_max_idx; i++) {
+ char clk_name[MAX_NAME_LEN];
+
+ /* get clock name, continue to next clock if name not found */
+ if (zynqmp_get_clock_name(i, clk_name))
+ continue;
+
+ /* Check if clock is valid and output clock.
+ * Do not regiter invalid or external clock.
+ */
+ ret = zynqmp_get_clock_type(i, &type);
+ if (ret || type != CLK_TYPE_OUTPUT)
+ continue;
+
+ /* Get parents of clock*/
+ if (zynqmp_get_parent_list(np, i, parent_names,
+ &total_parents)) {
+ WARN_ONCE(1, "No parents found for %s\n",
+ clock[i].clk_name);
+ continue;
+ }
+
+ zynqmp_data->hws[i] =
+ zynqmp_register_clk_topology(i, clk_name,
+ total_parents,
+ parent_names);
+ }
+
+ for (i = 0; i < clock_max_idx; i++) {
+ if (IS_ERR(zynqmp_data->hws[i])) {
+ pr_err("Zynq Ultrascale+ MPSoC clk %s: register failed with %ld\n",
+ clock[i].clk_name, PTR_ERR(zynqmp_data->hws[i]));
+ WARN_ON(1);
+ }
+ }
+ return 0;
+}
+
+/**
+ * zynqmp_get_clock_info() - Get clock information from firmware using PM_API
+ */
+static void zynqmp_get_clock_info(void)
+{
+ int i, ret;
+ u32 attr, type = 0;
+
+ memset(clock, 0, sizeof(clock));
+ for (i = 0; i < MAX_CLOCK; i++) {
+ zynqmp_pm_clock_get_name(i, clock[i].clk_name);
+ if (!strcmp(clock[i].clk_name, END_OF_CLK_NAME)) {
+ clock_max_idx = i;
+ break;
+ } else if (!strcmp(clock[i].clk_name, RESERVED_CLK_NAME)) {
+ continue;
+ }
+
+ ret = zynqmp_pm_clock_get_attributes(i, &attr);
+ if (ret)
+ continue;
+
+ clock[i].valid = attr & CLK_VALID_MASK;
+ clock[i].init_enable = !!(attr & CLK_INIT_ENABLE_MASK);
+ clock[i].type = attr >> CLK_TYPE_SHIFT ? CLK_TYPE_EXTERNAL :
+ CLK_TYPE_OUTPUT;
+ }
+
+ /* Get topology of all clock */
+ for (i = 0; i < clock_max_idx; i++) {
+ ret = zynqmp_get_clock_type(i, &type);
+ if (ret || type != CLK_TYPE_OUTPUT)
+ continue;
+
+ ret = zynqmp_clock_get_topology(i, clock[i].node,
+ &clock[i].num_nodes);
+ if (ret)
+ continue;
+
+ ret = zynqmp_clock_get_parents(i, clock[i].parent,
+ &clock[i].num_parents);
+ if (ret)
+ continue;
+ }
+}
+
+/**
+ * zynqmp_validate_eemi_ops() - Validate eemi ops
+ *
+ * Return: 0 on success else error code
+ */
+static inline int zynqmp_validate_eemi_ops(void)
+{
+ eemi_ops = zynqmp_pm_get_eemi_ops();
+ if (!eemi_ops || !eemi_ops->query_data ||
+ !eemi_ops->clock_setdivider ||
+ !eemi_ops->clock_getdivider ||
+ !eemi_ops->clock_setparent ||
+ !eemi_ops->clock_getparent ||
+ !eemi_ops->clock_getstate ||
+ !eemi_ops->clock_disable ||
+ !eemi_ops->clock_enable ||
+ !eemi_ops->ioctl)
+ return -ENXIO;
+
+ return 0;
+}
+
+/**
+ * zynqmp_clk_setup() - Setup the clock framework and register clocks
+ * @np: Device node
+ *
+ * Return: 0 on success else error code
+ */
+static int __init zynqmp_clk_setup(struct device_node *np)
+{
+ int idx;
+
+ idx = of_property_match_string(np, "clock-names", "pss_ref_clk");
+ if (idx < 0) {
+ pr_err("pss_ref_clk not provided\n");
+ return -ENOENT;
+ }
+ idx = of_property_match_string(np, "clock-names", "video_clk");
+ if (idx < 0) {
+ pr_err("video_clk not provided\n");
+ return -ENOENT;
+ }
+ idx = of_property_match_string(np, "clock-names", "pss_alt_ref_clk");
+ if (idx < 0) {
+ pr_err("pss_alt_ref_clk not provided\n");
+ return -ENOENT;
+ }
+ idx = of_property_match_string(np, "clock-names", "aux_ref_clk");
+ if (idx < 0) {
+ pr_err("aux_ref_clk not provided\n");
+ return -ENOENT;
+ }
+ idx = of_property_match_string(np, "clock-names", "gt_crx_ref_clk");
+ if (idx < 0) {
+ pr_err("aux_ref_clk not provided\n");
+ return -ENOENT;
+ }
+
+ zynqmp_data = kzalloc(sizeof(*zynqmp_data) + sizeof(*zynqmp_data) *
+ MAX_CLOCK, GFP_KERNEL);
+ if (!zynqmp_data)
+ return -ENOMEM;
+
+ zynqmp_get_clock_info();
+ zynqmp_register_clocks(np);
+
+ zynqmp_data->num = clock_max_idx;
+ of_clk_add_hw_provider(np, of_clk_hw_onecell_get, zynqmp_data);
+
+ return 0;
+}
+
+/**
+ * zynqmp_clock_init() - Initialize zynqmp clocks
+ *
+ * Return: 0 on success else error code
+ */
+static int __init zynqmp_clock_init(void)
+{
+ struct device_node *np;
+ int ret;
+
+ np = of_find_compatible_node(NULL, NULL, "xlnx,zynqmp");
+ if (!np)
+ return -ENOENT;
+ of_node_put(np);
+
+ np = of_find_compatible_node(NULL, NULL, "xlnx,zynqmp-clk");
+ if (!np) {
+ pr_err("%s: clk node not found\n", __func__);
+ of_node_put(np);
+ return -ENOENT;
+ }
+
+ ret = zynqmp_validate_eemi_ops();
+ if (ret) {
+ pr_err("%s: eemi ops validation fail\n", __func__);
+ of_node_put(np);
+ return ret;
+ }
+
+ ret = zynqmp_clk_setup(np);
+
+ return ret;
+}
+arch_initcall(zynqmp_clock_init);
diff --git a/drivers/clk/zynqmp/divider.c b/drivers/clk/zynqmp/divider.c
new file mode 100644
index 0000000..ef3e2e9
--- /dev/null
+++ b/drivers/clk/zynqmp/divider.c
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Zynq UltraScale+ MPSoC Divider support
+ *
+ * Copyright (C) 2016-2018 Xilinx
+ *
+ * Adjustable divider clock implementation
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include "clk-zynqmp.h"
+
+/*
+ * DOC: basic adjustable divider clock that cannot gate
+ *
+ * Traits of this clock:
+ * prepare - clk_prepare only ensures that parents are prepared
+ * enable - clk_enable only ensures that parents are enabled
+ * rate - rate is adjustable. clk->rate = ceiling(parent->rate / divisor)
+ * parent - fixed parent. No clk_set_parent support
+ */
+
+#define to_zynqmp_clk_divider(_hw) \
+ container_of(_hw, struct zynqmp_clk_divider, hw)
+
+#define CLK_FRAC BIT(13) /* has a fractional parent */
+
+/**
+ * struct zynqmp_clk_divider - adjustable divider clock
+ * @hw: handle between common and hardware-specific interfaces
+ * @flags: Hardware specific flags
+ * @clk_id: Id of clock
+ * @div_type: divisor type (TYPE_DIV1 or TYPE_DIV2)
+ */
+struct zynqmp_clk_divider {
+ struct clk_hw hw;
+ u8 flags;
+ u32 clk_id;
+ u32 div_type;
+};
+
+static int zynqmp_divider_get_val(unsigned long parent_rate, unsigned long rate)
+{
+ return DIV_ROUND_CLOSEST(parent_rate, rate);
+}
+
+/**
+ * zynqmp_clk_divider_recalc_rate() - Recalc rate of divider clock
+ * @hw: handle between common and hardware-specific interfaces
+ * @parent_rate: rate of parent clock
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static unsigned long zynqmp_clk_divider_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct zynqmp_clk_divider *divider = to_zynqmp_clk_divider(hw);
+ const char *clk_name = clk_hw_get_name(hw);
+ u32 clk_id = divider->clk_id;
+ u32 div_type = divider->div_type;
+ u32 div, value;
+ int ret;
+ const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+ ret = eemi_ops->clock_getdivider(clk_id, &div);
+
+ if (ret)
+ pr_warn_once("%s() get divider failed for %s, ret = %d\n",
+ __func__, clk_name, ret);
+
+ if (div_type == TYPE_DIV1)
+ value = div & 0xFFFF;
+ else
+ value = (div >> 16) & 0xFFFF;
+
+ return DIV_ROUND_UP_ULL(parent_rate, value);
+}
+
+/**
+ * zynqmp_clk_divider_round_rate() - Round rate of divider clock
+ * @hw: handle between common and hardware-specific interfaces
+ * @rate: rate of clock to be set
+ * @prate: rate of parent clock
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static long zynqmp_clk_divider_round_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long *prate)
+{
+ struct zynqmp_clk_divider *divider = to_zynqmp_clk_divider(hw);
+ const char *clk_name = clk_hw_get_name(hw);
+ u32 clk_id = divider->clk_id;
+ u32 div_type = divider->div_type;
+ u32 bestdiv;
+ int ret;
+ const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+ /* if read only, just return current value */
+ if (divider->flags & CLK_DIVIDER_READ_ONLY) {
+ ret = eemi_ops->clock_getdivider(clk_id, &bestdiv);
+
+ if (ret)
+ pr_warn_once("%s() get divider failed for %s, ret = %d\n",
+ __func__, clk_name, ret);
+ if (div_type == TYPE_DIV1)
+ bestdiv = bestdiv & 0xFFFF;
+ else
+ bestdiv = (bestdiv >> 16) & 0xFFFF;
+
+ return DIV_ROUND_UP_ULL((u64)*prate, bestdiv);
+ }
+
+ bestdiv = zynqmp_divider_get_val(*prate, rate);
+
+ if ((clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT) &&
+ (clk_hw_get_flags(hw) & CLK_FRAC))
+ bestdiv = rate % *prate ? 1 : bestdiv;
+ *prate = rate * bestdiv;
+
+ return rate;
+}
+
+/**
+ * zynqmp_clk_divider_set_rate() - Set rate of divider clock
+ * @hw: handle between common and hardware-specific interfaces
+ * @rate: rate of clock to be set
+ * @parent_rate: rate of parent clock
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_clk_divider_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct zynqmp_clk_divider *divider = to_zynqmp_clk_divider(hw);
+ const char *clk_name = clk_hw_get_name(hw);
+ u32 clk_id = divider->clk_id;
+ u32 div_type = divider->div_type;
+ u32 value, div;
+ int ret;
+ const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+ value = zynqmp_divider_get_val(parent_rate, rate);
+ if (div_type == TYPE_DIV1) {
+ div = value & 0xFFFF;
+ div |= 0xffff << 16;
+ } else {
+ div = 0xffff;
+ div |= value << 16;
+ }
+
+ ret = eemi_ops->clock_setdivider(clk_id, div);
+
+ if (ret)
+ pr_warn_once("%s() set divider failed for %s, ret = %d\n",
+ __func__, clk_name, ret);
+
+ return ret;
+}
+
+static const struct clk_ops zynqmp_clk_divider_ops = {
+ .recalc_rate = zynqmp_clk_divider_recalc_rate,
+ .round_rate = zynqmp_clk_divider_round_rate,
+ .set_rate = zynqmp_clk_divider_set_rate,
+};
+
+/**
+ * zynqmp_clk_register_divider() - register a divider clock
+ * @dev: device registering this clock
+ * @name: name of this clock
+ * @clk_id: Id of clock
+ * @div_type: Type of divisor
+ * @parent: name of clock's parent
+ * @flags: framework-specific flags
+ * @clk_divider_flags: divider-specific flags for this clock
+ *
+ * Return: clock hardware to registered clock divider
+ */
+struct clk_hw *zynqmp_clk_register_divider(struct device *dev,
+ const char *name,
+ u32 clk_id, u32 div_type,
+ const char *parent,
+ unsigned long flags,
+ u8 clk_divider_flags)
+{
+ struct zynqmp_clk_divider *div;
+ struct clk_hw *hw;
+ struct clk_init_data init;
+ int ret;
+
+ /* allocate the divider */
+ div = kzalloc(sizeof(*div), GFP_KERNEL);
+ if (!div)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &zynqmp_clk_divider_ops;
+ init.flags = flags;
+ init.parent_names = &parent;
+ init.num_parents = 1;
+
+ /* struct clk_divider assignments */
+ div->flags = clk_divider_flags;
+ div->hw.init = &init;
+ div->clk_id = clk_id;
+ div->div_type = div_type;
+
+ hw = &div->hw;
+ ret = clk_hw_register(dev, hw);
+ if (ret) {
+ kfree(div);
+ hw = ERR_PTR(ret);
+ }
+
+ return hw;
+}
+EXPORT_SYMBOL_GPL(zynqmp_clk_register_divider);
diff --git a/drivers/clk/zynqmp/pll.c b/drivers/clk/zynqmp/pll.c
new file mode 100644
index 0000000..1782829
--- /dev/null
+++ b/drivers/clk/zynqmp/pll.c
@@ -0,0 +1,345 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Zynq UltraScale+ MPSoC PLL driver
+ *
+ * Copyright (C) 2016-2018 Xilinx
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include "clk-zynqmp.h"
+
+/**
+ * struct zynqmp_pll - Structure for PLL clock
+ * @hw: Handle between common and hardware-specific interfaces
+ * @clk_id: PLL clock ID
+ */
+struct zynqmp_pll {
+ struct clk_hw hw;
+ u32 clk_id;
+};
+
+#define to_zynqmp_pll(_hw) container_of(_hw, struct zynqmp_pll, hw)
+
+#define PLL_FBDIV_MIN 25
+#define PLL_FBDIV_MAX 125
+
+#define PS_PLL_VCO_MIN 1500000000
+#define PS_PLL_VCO_MAX 3000000000UL
+
+enum pll_mode {
+ PLL_MODE_INT,
+ PLL_MODE_FRAC,
+};
+
+#define FRAC_OFFSET 0x8
+#define PLLFCFG_FRAC_EN BIT(31)
+#define FRAC_DIV BIT(16) /* 2^16 */
+
+/**
+ * zynqmp_pll_get_mode() - Get mode of PLL
+ * @hw: Handle between common and hardware-specific interfaces
+ *
+ * Return: Mode of PLL
+ */
+static inline enum pll_mode zynqmp_pll_get_mode(struct clk_hw *hw)
+{
+ struct zynqmp_pll *clk = to_zynqmp_pll(hw);
+ u32 clk_id = clk->clk_id;
+ const char *clk_name = clk_hw_get_name(hw);
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+ const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+ ret = eemi_ops->ioctl(0, IOCTL_GET_PLL_FRAC_MODE, clk_id, 0,
+ ret_payload);
+ if (ret)
+ pr_warn_once("%s() PLL get frac mode failed for %s, ret = %d\n",
+ __func__, clk_name, ret);
+
+ return ret_payload[1];
+}
+
+/**
+ * zynqmp_pll_set_mode() - Set the PLL mode
+ * @hw: Handle between common and hardware-specific interfaces
+ * @on: Flag to determine the mode
+ */
+static inline void zynqmp_pll_set_mode(struct clk_hw *hw, bool on)
+{
+ struct zynqmp_pll *clk = to_zynqmp_pll(hw);
+ u32 clk_id = clk->clk_id;
+ const char *clk_name = clk_hw_get_name(hw);
+ int ret;
+ u32 mode;
+ const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+ if (on)
+ mode = PLL_MODE_FRAC;
+ else
+ mode = PLL_MODE_INT;
+
+ ret = eemi_ops->ioctl(0, IOCTL_SET_PLL_FRAC_MODE, clk_id, mode, NULL);
+ if (ret)
+ pr_warn_once("%s() PLL set frac mode failed for %s, ret = %d\n",
+ __func__, clk_name, ret);
+}
+
+/**
+ * zynqmp_pll_round_rate() - Round a clock frequency
+ * @hw: Handle between common and hardware-specific interfaces
+ * @rate: Desired clock frequency
+ * @prate: Clock frequency of parent clock
+ *
+ * Return: Frequency closest to @rate the hardware can generate
+ */
+static long zynqmp_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ u32 fbdiv;
+ long rate_div, f;
+
+ /* Enable the fractional mode if needed */
+ rate_div = (rate * FRAC_DIV) / *prate;
+ f = rate_div % FRAC_DIV;
+ zynqmp_pll_set_mode(hw, !!f);
+
+ if (zynqmp_pll_get_mode(hw) == PLL_MODE_FRAC) {
+ if (rate > PS_PLL_VCO_MAX) {
+ fbdiv = rate / PS_PLL_VCO_MAX;
+ rate = rate / (fbdiv + 1);
+ }
+ if (rate < PS_PLL_VCO_MIN) {
+ fbdiv = DIV_ROUND_UP(PS_PLL_VCO_MIN, rate);
+ rate = rate * fbdiv;
+ }
+ return rate;
+ }
+
+ fbdiv = DIV_ROUND_CLOSEST(rate, *prate);
+ fbdiv = clamp_t(u32, fbdiv, PLL_FBDIV_MIN, PLL_FBDIV_MAX);
+ return *prate * fbdiv;
+}
+
+/**
+ * zynqmp_pll_recalc_rate() - Recalculate clock frequency
+ * @hw: Handle between common and hardware-specific interfaces
+ * @parent_rate: Clock frequency of parent clock
+ *
+ * Return: Current clock frequency
+ */
+static unsigned long zynqmp_pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct zynqmp_pll *clk = to_zynqmp_pll(hw);
+ u32 clk_id = clk->clk_id;
+ const char *clk_name = clk_hw_get_name(hw);
+ u32 fbdiv, data;
+ unsigned long rate, frac;
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+ const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+ /*
+ * makes probably sense to redundantly save fbdiv in the struct
+ * zynqmp_pll to save the IO access.
+ */
+ ret = eemi_ops->clock_getdivider(clk_id, &fbdiv);
+ if (ret)
+ pr_warn_once("%s() get divider failed for %s, ret = %d\n",
+ __func__, clk_name, ret);
+
+ rate = parent_rate * fbdiv;
+ if (zynqmp_pll_get_mode(hw) == PLL_MODE_FRAC) {
+ eemi_ops->ioctl(0, IOCTL_GET_PLL_FRAC_DATA, clk_id, 0,
+ ret_payload);
+ data = ret_payload[1];
+ frac = (parent_rate * data) / FRAC_DIV;
+ rate = rate + frac;
+ }
+
+ return rate;
+}
+
+/**
+ * zynqmp_pll_set_rate() - Set rate of PLL
+ * @hw: Handle between common and hardware-specific interfaces
+ * @rate: Frequency of clock to be set
+ * @parent_rate: Clock frequency of parent clock
+ *
+ * Set PLL divider to set desired rate.
+ *
+ * Returns: rate which is set on success else error code
+ */
+static int zynqmp_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct zynqmp_pll *clk = to_zynqmp_pll(hw);
+ u32 clk_id = clk->clk_id;
+ const char *clk_name = clk_hw_get_name(hw);
+ u32 fbdiv, data;
+ long rate_div, frac, m, f;
+ int ret;
+ const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+ if (zynqmp_pll_get_mode(hw) == PLL_MODE_FRAC) {
+ rate_div = ((rate * FRAC_DIV) / parent_rate);
+ m = rate_div / FRAC_DIV;
+ f = rate_div % FRAC_DIV;
+ m = clamp_t(u32, m, (PLL_FBDIV_MIN), (PLL_FBDIV_MAX));
+ rate = parent_rate * m;
+ frac = (parent_rate * f) / FRAC_DIV;
+
+ ret = eemi_ops->clock_setdivider(clk_id, m);
+ if (ret)
+ pr_warn_once("%s() set divider failed for %s, ret = %d\n",
+ __func__, clk_name, ret);
+
+ data = (FRAC_DIV * f) / FRAC_DIV;
+ eemi_ops->ioctl(0, IOCTL_SET_PLL_FRAC_DATA, clk_id, data, NULL);
+
+ return rate + frac;
+ }
+
+ fbdiv = DIV_ROUND_CLOSEST(rate, parent_rate);
+ fbdiv = clamp_t(u32, fbdiv, PLL_FBDIV_MIN, PLL_FBDIV_MAX);
+ ret = eemi_ops->clock_setdivider(clk_id, fbdiv);
+ if (ret)
+ pr_warn_once("%s() set divider failed for %s, ret = %d\n",
+ __func__, clk_name, ret);
+
+ return parent_rate * fbdiv;
+}
+
+/**
+ * zynqmp_pll_is_enabled() - Check if a clock is enabled
+ * @hw: Handle between common and hardware-specific interfaces
+ *
+ * Return: 1 if the clock is enabled, 0 otherwise
+ */
+static int zynqmp_pll_is_enabled(struct clk_hw *hw)
+{
+ struct zynqmp_pll *clk = to_zynqmp_pll(hw);
+ const char *clk_name = clk_hw_get_name(hw);
+ u32 clk_id = clk->clk_id;
+ unsigned int state;
+ int ret;
+ const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+ ret = eemi_ops->clock_getstate(clk_id, &state);
+ if (ret) {
+ pr_warn_once("%s() clock get state failed for %s, ret = %d\n",
+ __func__, clk_name, ret);
+ return -EIO;
+ }
+
+ return state ? 1 : 0;
+}
+
+/**
+ * zynqmp_pll_enable() - Enable clock
+ * @hw: Handle between common and hardware-specific interfaces
+ *
+ * Return: 0 on success else error code
+ */
+static int zynqmp_pll_enable(struct clk_hw *hw)
+{
+ struct zynqmp_pll *clk = to_zynqmp_pll(hw);
+ const char *clk_name = clk_hw_get_name(hw);
+ u32 clk_id = clk->clk_id;
+ int ret;
+ const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+ if (zynqmp_pll_is_enabled(hw))
+ return 0;
+
+ pr_info("PLL: enable\n");
+
+ ret = eemi_ops->clock_enable(clk_id);
+ if (ret)
+ pr_warn_once("%s() clock enable failed for %s, ret = %d\n",
+ __func__, clk_name, ret);
+
+ return ret;
+}
+
+/**
+ * zynqmp_pll_disable() - Disable clock
+ * @hw: Handle between common and hardware-specific interfaces
+ */
+static void zynqmp_pll_disable(struct clk_hw *hw)
+{
+ struct zynqmp_pll *clk = to_zynqmp_pll(hw);
+ const char *clk_name = clk_hw_get_name(hw);
+ u32 clk_id = clk->clk_id;
+ int ret;
+ const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+ if (!zynqmp_pll_is_enabled(hw))
+ return;
+
+ pr_info("PLL: shutdown\n");
+
+ ret = eemi_ops->clock_disable(clk_id);
+ if (ret)
+ pr_warn_once("%s() clock disable failed for %s, ret = %d\n",
+ __func__, clk_name, ret);
+}
+
+static const struct clk_ops zynqmp_pll_ops = {
+ .enable = zynqmp_pll_enable,
+ .disable = zynqmp_pll_disable,
+ .is_enabled = zynqmp_pll_is_enabled,
+ .round_rate = zynqmp_pll_round_rate,
+ .recalc_rate = zynqmp_pll_recalc_rate,
+ .set_rate = zynqmp_pll_set_rate,
+};
+
+/**
+ * zynqmp_clk_register_pll() - Register PLL with the clock framework
+ * @dev: Device pointer
+ * @name: PLL name
+ * @clk_id: Clock ID
+ * @parent: Parent clock name
+ * @flag: PLL flgas
+ *
+ * Return: clock hardware to the registered clock
+ */
+struct clk_hw *zynqmp_clk_register_pll(struct device *dev, const char *name,
+ u32 clk_id,
+ const char *parent,
+ unsigned long flag)
+{
+ struct zynqmp_pll *pll;
+ struct clk_hw *hw;
+ struct clk_init_data init;
+ int ret;
+
+ init.name = name;
+ init.ops = &zynqmp_pll_ops;
+ init.flags = flag;
+ init.parent_names = &parent;
+ init.num_parents = 1;
+
+ pll = kmalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll)
+ return ERR_PTR(-ENOMEM);
+
+ /* Populate the struct */
+ pll->hw.init = &init;
+ pll->clk_id = clk_id;
+
+ hw = &pll->hw;
+ ret = clk_hw_register(dev, hw);
+ if (ret) {
+ kfree(pll);
+ return ERR_PTR(ret);
+ }
+
+ clk_hw_set_rate_range(hw, PS_PLL_VCO_MIN, PS_PLL_VCO_MAX);
+ if (ret < 0)
+ pr_err("%s:ERROR clk_set_rate_range failed %d\n", name, ret);
+
+ return hw;
+}
--
2.7.4
Powered by blists - more mailing lists