linux-kernel - [PATCH v5 1/3] dt-bindings: pinctrl: bcm2835-gpio: Add generic pinctrl support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1523422726-7910-2-git-send-email-matheus@castello.eng.br>
Date:   Wed, 11 Apr 2018 00:58:44 -0400
From:   Matheus Castello <matheus@...tello.eng.br>
To:     robh@...nel.org, stefan.wahren@...e.com, eric@...olt.net
Cc:     linus.walleij@...aro.org, mark.rutland@....com, robh+dt@...nel.org,
        linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
        Matheus Castello <matheus@...tello.eng.br>
Subject: [PATCH v5 1/3] dt-bindings: pinctrl: bcm2835-gpio: Add generic pinctrl support

Added generic pin configuration and multiplexing support,
and should be preferred than brcm legacy one.

Signed-off-by: Matheus Castello <matheus@...tello.eng.br>
---
 .../devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt  | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
index 2569866..51fe305 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
@@ -36,6 +36,24 @@ listed. In other words, a subnode that lists only a mux function implies no
 information about any pull configuration. Similarly, a subnode that lists only
 a pul parameter implies no information about the mux function.

+The BCM2835 pin configuration and multiplexing supports the generic bindings.
+For details on each properties, you can refer to ./pinctrl-bindings.txt.
+
+Required sub-node properties:
+  - pins
+  - function
+
+Optional sub-node properties:
+  - bias-disable
+  - bias-pull-up
+  - bias-pull-down
+  - output-high
+  - output-low
+
+Legacy pin configuration and multiplexing binding:
+*** (Its use is deprecated, use generic multiplexing and configuration
+bindings instead)
+
 Required subnode-properties:
 - brcm,pins: An array of cells. Each cell contains the ID of a pin. Valid IDs
   are the integer GPIO IDs; 0==GPIO0, 1==GPIO1, ... 53==GPIO53.
--
2.7.4