| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <052cdf7d45bb94e106ae33c972a050089ef75803.1523452618.git.michal.simek@xilinx.com>
Date: Wed, 11 Apr 2018 15:17:05 +0200
From: Michal Simek <michal.simek@...inx.com>
To: devicetree@...r.kernel.org
Cc: Sören Brinkmann <soren.brinkmann@...inx.com>,
Naga Sureshkumar Relli <naga.sureshkumar.relli@...inx.com>,
monstr@...str.eu, VNSL Durga <vnsl.durga.challa@...inx.com>,
Masahiro Yamada <yamada.masahiro@...ionext.com>,
Kedareswara rao Appana <appanad@...inx.com>,
linux-kernel@...r.kernel.org,
Anurag Kumar Vulisha <anurag.kumar.vulisha@...inx.com>,
Alistair Francis <alistair.francis@...inx.com>,
Arnd Bergmann <arnd@...db.de>,
Will Deacon <will.deacon@....com>,
Mark Rutland <mark.rutland@....com>,
Rob Herring <robh+dt@...nel.org>,
Catalin Marinas <catalin.marinas@....com>,
linux-arm-kernel@...ts.infradead.org,
Javier Martinez Canillas <javier@...hile0.org>
Subject: [PATCH] arm64: zynqmp: Remove ep108 board
ZynqMP Emulation board is no longer tested and there is no reason to
keep maintaining it.
Signed-off-by: Michal Simek <michal.simek@...inx.com>
---
arch/arm64/boot/dts/xilinx/Makefile | 1 -
.../boot/dts/xilinx/zynqmp-ep108-clk.dtsi | 137 ----------------
arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts | 154 ------------------
3 files changed, 292 deletions(-)
delete mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi
delete mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
diff --git a/arch/arm64/boot/dts/xilinx/Makefile b/arch/arm64/boot/dts/xilinx/Makefile
index c2a0c00272e2..d452f80e7601 100644
--- a/arch/arm64/boot/dts/xilinx/Makefile
+++ b/arch/arm64/boot/dts/xilinx/Makefile
@@ -1,5 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-ep108.dtb
dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1232-revA.dtb
dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1254-revA.dtb
dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1275-revA.dtb
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi
deleted file mode 100644
index 9f5eedbc2139..000000000000
--- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi
+++ /dev/null
@@ -1,137 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * clock specification for Xilinx ZynqMP ep108 development board
- *
- * (C) Copyright 2015, Xilinx, Inc.
- *
- * Michal Simek <michal.simek@...inx.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- */
-
-/ {
- misc_clk: misc_clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <25000000>;
- };
-
- i2c_clk: i2c_clk {
- compatible = "fixed-clock";
- #clock-cells = <0x0>;
- clock-frequency = <111111111>;
- };
-
- sata_clk: sata_clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <75000000>;
- };
-
- clk100: clk100 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <100000000>;
- };
-
- clk600: clk600 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <600000000>;
- };
-};
-
-&can0 {
- clocks = <&misc_clk &misc_clk>;
-};
-
-&can1 {
- clocks = <&misc_clk &misc_clk>;
-};
-
-&fpd_dma_chan1 {
- clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan2 {
- clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan3 {
- clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan4 {
- clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan5 {
- clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan6 {
- clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan7 {
- clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan8 {
- clocks = <&clk600>, <&clk100>;
-};
-
-&gem0 {
- clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>;
-};
-
-&gpio {
- clocks = <&misc_clk>;
-};
-
-&i2c0 {
- clocks = <&i2c_clk>;
-};
-
-&i2c1 {
- clocks = <&i2c_clk>;
-};
-
-&sata {
- clocks = <&sata_clk>;
-};
-
-&sdhci0 {
- clocks = <&misc_clk>, <&misc_clk>;
-};
-
-&sdhci1 {
- clocks = <&misc_clk>, <&misc_clk>;
-};
-
-&spi0 {
- clocks = <&misc_clk &misc_clk>;
-};
-
-&spi1 {
- clocks = <&misc_clk &misc_clk>;
-};
-
-&uart0 {
- clocks = <&misc_clk &misc_clk>;
-};
-
-&usb0 {
- clocks = <&misc_clk>, <&misc_clk>;
-};
-
-&usb1 {
- clocks = <&misc_clk>, <&misc_clk>;
-};
-
-&watchdog0 {
- clocks= <&misc_clk>;
-};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
deleted file mode 100644
index 4b0684911626..000000000000
--- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
+++ /dev/null
@@ -1,154 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * dts file for Xilinx ZynqMP ep108 development board
- *
- * (C) Copyright 2014 - 2015, Xilinx, Inc.
- *
- * Michal Simek <michal.simek@...inx.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- */
-
-/dts-v1/;
-
-#include "zynqmp.dtsi"
-#include "zynqmp-ep108-clk.dtsi"
-
-/ {
- model = "ZynqMP EP108";
-
- aliases {
- mmc0 = &sdhci0;
- mmc1 = &sdhci1;
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x40000000>;
- };
-};
-
-&can0 {
- status = "okay";
-};
-
-&can1 {
- status = "okay";
-};
-
-&gem0 {
- status = "okay";
- phy-handle = <&phy0>;
- phy-mode = "rgmii-id";
- phy0: phy@0 {
- reg = <0>;
- max-speed = <100>;
- };
-};
-
-&gpio {
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
- clock-frequency = <400000>;
- eeprom@54 {
- compatible = "atmel,24c64";
- reg = <0x54>;
- };
-};
-
-&i2c1 {
- status = "okay";
- clock-frequency = <400000>;
- eeprom@55 {
- compatible = "atmel,24c64";
- reg = <0x55>;
- };
-};
-
-&sata {
- status = "okay";
- ceva,broken-gen2;
- /* SATA Phy OOB timing settings */
- ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
- ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
- ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
- ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>;
- ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
- ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
- ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
- ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>;
-};
-
-&sdhci0 {
- status = "okay";
- bus-width = <8>;
-};
-
-&sdhci1 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
- num-cs = <1>;
- spi0_flash0: spi0_flash0@0 {
- compatible = "m25p80";
- #address-cells = <1>;
- #size-cells = <1>;
- spi-max-frequency = <50000000>;
- reg = <0>;
-
- spi0_flash0@0 {
- label = "spi0_flash0";
- reg = <0x0 0x100000>;
- };
- };
-};
-
-&spi1 {
- status = "okay";
- num-cs = <1>;
- spi1_flash0: spi1_flash0@0 {
- compatible = "m25p80";
- #address-cells = <1>;
- #size-cells = <1>;
- spi-max-frequency = <50000000>;
- reg = <0>;
-
- spi1_flash0@0 {
- label = "spi1_flash0";
- reg = <0x0 0x100000>;
- };
- };
-};
-
-&uart0 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
- dr_mode = "peripheral";
- maximum-speed = "high-speed";
-};
-
-&usb1 {
- status = "okay";
- dr_mode = "host";
- maximum-speed = "high-speed";
-};
-
-&watchdog0 {
- status = "okay";
-};
--
2.17.0
Powered by blists - more mailing lists