linux-kernel - [PATCH 3.18 094/121] scsi: libsas: initialize sas_phy status according to response of DISCOVER

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20180411183502.265625848@linuxfoundation.org>
Date:   Wed, 11 Apr 2018 20:36:37 +0200
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, chenxiang <chenxiang66@...ilicon.com>,
        John Garry <john.garry@...wei.com>,
        Jason Yan <yanaijie@...wei.com>,
        Christoph Hellwig <hch@....de>,
        Hannes Reinecke <hare@...e.com>,
        "Martin K. Petersen" <martin.petersen@...cle.com>,
        Sasha Levin <alexander.levin@...rosoft.com>
Subject: [PATCH 3.18 094/121] scsi: libsas: initialize sas_phy status according to response of DISCOVER

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: chenxiang <chenxiang66@...ilicon.com>

[ Upstream commit affc67788fe5dfffad5cda3d461db5cf2b2ff2b0 ]

The status of SAS PHY is in sas_phy->enabled. There is an issue that the
status of a remote SAS PHY may be initialized incorrectly: if disable
remote SAS PHY through sysfs interface (such as echo 0 >
/sys/class/sas_phy/phy-1:0:0/enable), then reboot the system, and we
will find the status of remote SAS PHY which is disabled before is
1 (cat /sys/class/sas_phy/phy-1:0:0/enable). But actually the status of
remote SAS PHY is disabled and the device attached is not found.

In SAS protocol, NEGOTIATED LOGICAL LINK RATE field of DISCOVER response
is 0x1 when remote SAS PHY is disabled. So initialize sas_phy->enabled
according to the value of NEGOTIATED LOGICAL LINK RATE field.

Signed-off-by: chenxiang <chenxiang66@...ilicon.com>
Reviewed-by: John Garry <john.garry@...wei.com>
Signed-off-by: Jason Yan <yanaijie@...wei.com>
Reviewed-by: Christoph Hellwig <hch@....de>
Reviewed-by: Hannes Reinecke <hare@...e.com>
Signed-off-by: Martin K. Petersen <martin.petersen@...cle.com>
Signed-off-by: Sasha Levin <alexander.levin@...rosoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
 drivers/scsi/libsas/sas_expander.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -282,6 +282,7 @@ static void sas_set_ex_phy(struct domain
 	phy->phy->minimum_linkrate = dr->pmin_linkrate;
 	phy->phy->maximum_linkrate = dr->pmax_linkrate;
 	phy->phy->negotiated_linkrate = phy->linkrate;
+	phy->phy->enabled = (phy->linkrate != SAS_PHY_DISABLED);

  skip:
 	if (new_phy)