| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 13 Apr 2018 11:00:59 -0300
From: Arnaldo Carvalho de Melo <acme@...nel.org>
To: Ingo Molnar <mingo@...nel.org>
Cc: Clark Williams <williams@...hat.com>, linux-kernel@...r.kernel.org,
linux-perf-users@...r.kernel.org,
Arnaldo Carvalho de Melo <acme@...hat.com>,
Adrian Hunter <adrian.hunter@...el.com>,
Alexei Starovoitov <alexei.starovoitov@...il.com>,
Andi Kleen <ak@...ux.intel.com>,
Daniel Borkmann <daniel@...earbox.net>,
David Ahern <dsahern@...il.com>,
Jin Yao <yao.jin@...ux.intel.com>,
Jiri Olsa <jolsa@...nel.org>,
Linus Torvalds <torvalds@...ux-foundation.org>,
Martin Liška <mliska@...e.cz>,
Namhyung Kim <namhyung@...nel.org>,
Ravi Bangoria <ravi.bangoria@...ux.vnet.ibm.com>,
Thomas Richter <tmricht@...ux.vnet.ibm.com>,
Wang Nan <wangnan0@...wei.com>
Subject: [PATCH 05/17] perf annotate browser: Allow showing offsets in more than just jump targets
From: Arnaldo Carvalho de Melo <acme@...hat.com>
Jesper wanted to see offsets at callq sites when doing some performance
investigation related to retpolines, so save him some time by providing
a 'O' hotkey to allow showing offsets from function start at call
instructions or in all instructions, just go on pressing 'O' till the
offsets you need appear.
Example:
Starts with:
Samples: 64 of event 'cycles:ppp', 100000 Hz, Event count (approx.): 318963
ixgbe_read_reg /proc/kcore
Percent│ ↑ je 2a
│ ┌──cmp $0xffffffff,%r13d
│ ├──je d0
│ │ mov $0x53e3,%edi
│ │→ callq __const_udelay
│ │ sub $0x1,%r15d
│ │↑ jne 83
│ │ mov 0x8(%rbp),%rax
│ │ testb $0x20,0x1799(%rax)
│ │↑ je 2a
│ │ mov 0x200(%rax),%rdi
│ │ mov %r13d,%edx
│ │ mov $0xffffffffc02595d8,%rsi
│ │→ callq netdev_warn
│ │↑ jmpq 2a
│d0:└─→mov 0x8(%rbp),%rsi
│ mov %rbp,%rdi
│ mov %eax,0x4(%rsp)
│ → callq ixgbe_remove_adapter.isra.77
│ mov 0x4(%rsp),%eax
Press 'h' for help on key bindings
============================================================================
Pess 'O':
Samples: 64 of event 'cycles:ppp', 100000 Hz, Event count (approx.): 318963
ixgbe_read_reg /proc/kcore
Percent│ ↑ je 2a
│ ┌──cmp $0xffffffff,%r13d
│ ├──je d0
│ │ mov $0x53e3,%edi
│99:│→ callq __const_udelay
│ │ sub $0x1,%r15d
│ │↑ jne 83
│ │ mov 0x8(%rbp),%rax
│ │ testb $0x20,0x1799(%rax)
│ │↑ je 2a
│ │ mov 0x200(%rax),%rdi
│ │ mov %r13d,%edx
│ │ mov $0xffffffffc02595d8,%rsi
│c6:│→ callq netdev_warn
│ │↑ jmpq 2a
│d0:└─→mov 0x8(%rbp),%rsi
│ mov %rbp,%rdi
│ mov %eax,0x4(%rsp)
│db: → callq ixgbe_remove_adapter.isra.77
│ mov 0x4(%rsp),%eax
Press 'h' for help on key bindings
============================================================================
Press 'O' again:
Samples: 64 of event 'cycles:ppp', 100000 Hz, Event count (approx.): 318963
ixgbe_read_reg /proc/kcore
Percent│8c: ↑ je 2a
│8e:┌──cmp $0xffffffff,%r13d
│92:├──je d0
│94:│ mov $0x53e3,%edi
│99:│→ callq __const_udelay
│9e:│ sub $0x1,%r15d
│a2:│↑ jne 83
│a4:│ mov 0x8(%rbp),%rax
│a8:│ testb $0x20,0x1799(%rax)
│af:│↑ je 2a
│b5:│ mov 0x200(%rax),%rdi
│bc:│ mov %r13d,%edx
│bf:│ mov $0xffffffffc02595d8,%rsi
│c6:│→ callq netdev_warn
│cb:│↑ jmpq 2a
│d0:└─→mov 0x8(%rbp),%rsi
│d4: mov %rbp,%rdi
│d7: mov %eax,0x4(%rsp)
│db: → callq ixgbe_remove_adapter.isra.77
│e0: mov 0x4(%rsp),%eax
Press 'h' for help on key bindings
============================================================================
Press 'O' again and it will show just jump target offsets.
Suggested-by: Jesper Dangaard Brouer <brouer@...hat.com>
Cc: Adrian Hunter <adrian.hunter@...el.com>
Cc: Alexei Starovoitov <alexei.starovoitov@...il.com>
Cc: Andi Kleen <ak@...ux.intel.com>
Cc: Daniel Borkmann <daniel@...earbox.net>
Cc: David Ahern <dsahern@...il.com>
Cc: Jin Yao <yao.jin@...ux.intel.com>
Cc: Jiri Olsa <jolsa@...nel.org>
Cc: Linus Torvalds <torvalds@...ux-foundation.org>
Cc: Martin Liška <mliska@...e.cz>
Cc: Namhyung Kim <namhyung@...nel.org>
Cc: Ravi Bangoria <ravi.bangoria@...ux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@...ux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@...wei.com>
Link: https://lkml.kernel.org/n/tip-upp6pfdetwlsx18ec2uf1od4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@...hat.com>
---
tools/perf/ui/browsers/annotate.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/tools/perf/ui/browsers/annotate.c b/tools/perf/ui/browsers/annotate.c
index 12c099a87f8b..3781d74088a7 100644
--- a/tools/perf/ui/browsers/annotate.c
+++ b/tools/perf/ui/browsers/annotate.c
@@ -692,6 +692,7 @@ static int annotate_browser__run(struct annotate_browser *browser,
"J Toggle showing number of jump sources on targets\n"
"n Search next string\n"
"o Toggle disassembler output/simplified view\n"
+ "O Bump offset level (jump targets -> +call -> all -> cycle thru)\n"
"s Toggle source code view\n"
"t Circulate percent, total period, samples view\n"
"/ Search string\n"
@@ -719,6 +720,10 @@ static int annotate_browser__run(struct annotate_browser *browser,
notes->options->use_offset = !notes->options->use_offset;
annotation__update_column_widths(notes);
continue;
+ case 'O':
+ if (++notes->options->offset_level > ANNOTATION__MAX_OFFSET_LEVEL)
+ notes->options->offset_level = ANNOTATION__MIN_OFFSET_LEVEL;
+ continue;
case 'j':
notes->options->jump_arrows = !notes->options->jump_arrows;
continue;
--
2.14.3
Powered by blists - more mailing lists