[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAMz4kuKdLEN6MNeyoBjR7NMhG-YJ9qBMZ5U1iYi623Z_1JXbpQ@mail.gmail.com>
Date: Mon, 16 Apr 2018 16:18:06 +0800
From: Baolin Wang <baolin.wang@...aro.org>
To: Linus Walleij <linus.walleij@...aro.org>
Cc: Andy Shevchenko <andy.shevchenko@...il.com>,
Mark Brown <broonie@...nel.org>,
"open list:GPIO SUBSYSTEM" <linux-gpio@...r.kernel.org>,
LKML <linux-kernel@...r.kernel.org>,
Baolin Wang <baolin.wang@...aro.org>
Subject: Re: [PATCH 1/2] gpio: eic: Add edge trigger emulation for EIC
Hi,
On 30 March 2018 at 15:02, Baolin Wang <baolin.wang@...aro.org> wrote:
> The Spreadtrum debounce EIC and latch EIC can not support edge trigger,
> but most GPIO users (like gpio-key driver) only use the edge trigger,
> thus the EIC driver need add some support to emulate the edge trigger
> to satisfy this requirement.
>
> Signed-off-by: Baolin Wang <baolin.wang@...aro.org>
Any comments for this patch set? Thanks.
> ---
> drivers/gpio/gpio-eic-sprd.c | 73 ++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 73 insertions(+)
>
> diff --git a/drivers/gpio/gpio-eic-sprd.c b/drivers/gpio/gpio-eic-sprd.c
> index de7dd93..e0d6a0a 100644
> --- a/drivers/gpio/gpio-eic-sprd.c
> +++ b/drivers/gpio/gpio-eic-sprd.c
> @@ -300,6 +300,7 @@ static int sprd_eic_irq_set_type(struct irq_data *data, unsigned int flow_type)
> struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
> struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
> u32 offset = irqd_to_hwirq(data);
> + int state;
>
> switch (sprd_eic->type) {
> case SPRD_EIC_DEBOUNCE:
> @@ -310,6 +311,17 @@ static int sprd_eic_irq_set_type(struct irq_data *data, unsigned int flow_type)
> case IRQ_TYPE_LEVEL_LOW:
> sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 0);
> break;
> + case IRQ_TYPE_EDGE_RISING:
> + case IRQ_TYPE_EDGE_FALLING:
> + case IRQ_TYPE_EDGE_BOTH:
> + state = sprd_eic_get(chip, offset);
> + if (state)
> + sprd_eic_update(chip, offset,
> + SPRD_EIC_DBNC_IEV, 0);
> + else
> + sprd_eic_update(chip, offset,
> + SPRD_EIC_DBNC_IEV, 1);
> + break;
> default:
> return -ENOTSUPP;
> }
> @@ -324,6 +336,17 @@ static int sprd_eic_irq_set_type(struct irq_data *data, unsigned int flow_type)
> case IRQ_TYPE_LEVEL_LOW:
> sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 1);
> break;
> + case IRQ_TYPE_EDGE_RISING:
> + case IRQ_TYPE_EDGE_FALLING:
> + case IRQ_TYPE_EDGE_BOTH:
> + state = sprd_eic_get(chip, offset);
> + if (state)
> + sprd_eic_update(chip, offset,
> + SPRD_EIC_LATCH_INTPOL, 0);
> + else
> + sprd_eic_update(chip, offset,
> + SPRD_EIC_LATCH_INTPOL, 1);
> + break;
> default:
> return -ENOTSUPP;
> }
> @@ -405,6 +428,55 @@ static int sprd_eic_irq_set_type(struct irq_data *data, unsigned int flow_type)
> return 0;
> }
>
> +static void sprd_eic_toggle_trigger(struct gpio_chip *chip, unsigned int irq,
> + unsigned int offset)
> +{
> + struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
> + struct irq_data *data = irq_get_irq_data(irq);
> + u32 trigger = irqd_get_trigger_type(data);
> + int state, post_state;
> +
> + /*
> + * The debounce EIC and latch EIC can only support level trigger, so we
> + * can toggle the level trigger to emulate the edge trigger.
> + */
> + if ((sprd_eic->type != SPRD_EIC_DEBOUNCE &&
> + sprd_eic->type != SPRD_EIC_LATCH) ||
> + !(trigger & IRQ_TYPE_EDGE_BOTH))
> + return;
> +
> + sprd_eic_irq_mask(data);
> + state = sprd_eic_get(chip, offset);
> +
> +retry:
> + switch (sprd_eic->type) {
> + case SPRD_EIC_DEBOUNCE:
> + if (state)
> + sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 0);
> + else
> + sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 1);
> + break;
> + case SPRD_EIC_LATCH:
> + if (state)
> + sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 0);
> + else
> + sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 1);
> + break;
> + default:
> + sprd_eic_irq_unmask(data);
> + return;
> + }
> +
> + post_state = sprd_eic_get(chip, offset);
> + if (state != post_state) {
> + dev_warn(chip->parent, "EIC level was changed.\n");
> + state = post_state;
> + goto retry;
> + }
> +
> + sprd_eic_irq_unmask(data);
> +}
> +
> static int sprd_eic_match_chip_by_type(struct gpio_chip *chip, void *data)
> {
> enum sprd_eic_type type = *(enum sprd_eic_type *)data;
> @@ -448,6 +520,7 @@ static void sprd_eic_handle_one_type(struct gpio_chip *chip)
> bank * SPRD_EIC_PER_BANK_NR + n);
>
> generic_handle_irq(girq);
> + sprd_eic_toggle_trigger(chip, girq, n);
> }
> }
> }
> --
> 1.7.9.5
>
--
Baolin.wang
Best Regards
Powered by blists - more mailing lists