| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <4fb50a31-1893-5cfb-0f35-fb2501c2afa8@linux.vnet.ibm.com>
Date: Mon, 16 Apr 2018 10:56:52 +0200
From: Pierre Morel <pmorel@...ux.vnet.ibm.com>
To: Tony Krowiak <akrowiak@...ux.vnet.ibm.com>,
linux-s390@...r.kernel.org, linux-kernel@...r.kernel.org,
kvm@...r.kernel.org
Cc: freude@...ibm.com, schwidefsky@...ibm.com,
heiko.carstens@...ibm.com, borntraeger@...ibm.com,
cohuck@...hat.com, kwankhede@...dia.com,
bjsdjshi@...ux.vnet.ibm.com, pbonzini@...hat.com,
alex.williamson@...hat.com, alifm@...ux.vnet.ibm.com,
mjrosato@...ux.vnet.ibm.com, jjherne@...ux.vnet.ibm.com,
thuth@...hat.com, pasic@...ux.vnet.ibm.com, berrange@...hat.com,
fiuczy@...ux.vnet.ibm.com, buendgen@...ibm.com
Subject: Re: [PATCH v4 03/15] KVM: s390: refactor crypto initialization
On 15/04/2018 23:22, Tony Krowiak wrote:
> This patch refactors the code that initializes the crypto
> configuration for a guest. The crypto configuration is contained in
> a crypto control block (CRYCB) which is a satellite control block to
> our main hardware virtualization control block. The CRYCB is
> attached to the main virtualization control block via a CRYCB
> designation (CRYCBD) designation field containing the address of
> the CRYCB as well as its format.
>
> Prior to the introduction of AP device virtualization, there was
> no need to provide access to or specify the format of the CRYCB for
> a guest unless the MSA extension 3 (MSAX3) facility was installed
> on the host system. With the introduction of AP device virtualization,
> the CRYCB and its format must be made accessible to the guest
> regardless of the presence of the MSAX3 facility.
>
> The crypto initialization code is restructured as follows:
>
> * A new compilation unit is introduced to contain all interfaces
> and data structures related to configuring a guest's CRYCB for
> both the refactoring of crypto initialization as well as all
> subsequent patches introducing AP virtualization support.
>
> * Currently, the asm code for querying the AP configuration is
> duplicated in the AP bus as well as in KVM. Since the KVM
> code was introduced, the AP bus has externalized the interface
> for querying the AP configuration. The KVM interface will be
> replaced with a call to the AP bus interface. Of course, this
> will be moved to the new compilation unit mentioned above.
>
> * An interface to format the CRYCBD field will be provided via
> the new compilation unit and called from the KVM vm
> initialization.
>
> Signed-off-by: Tony Krowiak <akrowiak@...ux.vnet.ibm.com>
> ---
> arch/s390/include/asm/kvm-ap.h | 15 +++++++++
> arch/s390/include/asm/kvm_host.h | 1 +
> arch/s390/kvm/kvm-ap.c | 39 ++++++++++++++++++++++++
> arch/s390/kvm/kvm-s390.c | 60 ++++----------------------------------
> 4 files changed, 61 insertions(+), 54 deletions(-)
>
> diff --git a/arch/s390/include/asm/kvm-ap.h b/arch/s390/include/asm/kvm-ap.h
> index 84412a9..736e93e 100644
> --- a/arch/s390/include/asm/kvm-ap.h
> +++ b/arch/s390/include/asm/kvm-ap.h
> @@ -10,6 +10,9 @@
> #ifndef _ASM_KVM_AP
> #define _ASM_KVM_AP
>
> +#include <linux/types.h>
> +#include <linux/kvm_host.h>
> +
> /**
> * kvm_ap_instructions_installed()
> *
> @@ -20,4 +23,16 @@
> */
> int kvm_ap_instructions_installed(void);
>
> +/**
> + * kvm_ap_build_crycbd
> + *
> + * The crypto control block designation (CRYCBD) is a 32-bit field that
> + * designates both the host real address and format of the CRYCB. This function
> + * builds the CRYCBD field for use by the KVM guest.
> + *
> + * @kvm: the KVM guest
> + * @crycbd: reference to the CRYCBD
> + */
> +void kvm_ap_build_crycbd(struct kvm *kvm);
> +
> #endif /* _ASM_KVM_AP */
> diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
> index 81cdb6b..c990a1d 100644
> --- a/arch/s390/include/asm/kvm_host.h
> +++ b/arch/s390/include/asm/kvm_host.h
> @@ -257,6 +257,7 @@ struct kvm_s390_sie_block {
> __u8 reservedf0[12]; /* 0x00f0 */
> #define CRYCB_FORMAT1 0x00000001
> #define CRYCB_FORMAT2 0x00000003
> +#define CRYCB_FORMAT_MASK 0x00000003
> __u32 crycbd; /* 0x00fc */
> __u64 gcr[16]; /* 0x0100 */
> __u64 gbea; /* 0x0180 */
> diff --git a/arch/s390/kvm/kvm-ap.c b/arch/s390/kvm/kvm-ap.c
> index 1267588..991bae4 100644
> --- a/arch/s390/kvm/kvm-ap.c
> +++ b/arch/s390/kvm/kvm-ap.c
> @@ -10,6 +10,8 @@
> #include <asm/kvm-ap.h>
> #include <asm/ap.h>
>
> +#include "kvm-s390.h"
> +
> int kvm_ap_instructions_installed(void)
> {
> #ifdef CONFIG_ZCRYPT
> @@ -19,3 +21,40 @@ int kvm_ap_instructions_installed(void)
> #endif
> }
> EXPORT_SYMBOL(kvm_ap_instructions_installed);
> +
> +static inline int kvm_ap_query_config(struct ap_config_info *config)
> +{
> + memset(config, 0, sizeof(*config));
> +
> +#ifdef CONFIG_ZCRYPT
I would prefer that you define the interface in an include file
with stubs for the case ZCRYPT is not set.
> + if (kvm_ap_instructions_installed())
> + return ap_query_configuration(config);
> +#endif
> +
> + return -EOPNOTSUPP;
> +}
> +
> +static int kvm_ap_apxa_installed(void)
> +{
> + struct ap_config_info config;
> +
> + if (kvm_ap_query_config(&config) == 0)
> + return (config.apxa == 1);
> +
> + return 0;
> +}
> +
> +void kvm_ap_build_crycbd(struct kvm *kvm)
> +{
> + kvm->arch.crypto.crycbd = (__u32)(unsigned long) kvm->arch.crypto.crycb;
> + kvm->arch.crypto.crycbd &= ~(CRYCB_FORMAT_MASK);
> +
> + /* check whether MSAX3 is installed */
It means we do not support AP virtualization without MSA3.
It follows we do not support CRYCB_FORMAT0
It is different from what you explain in the comment.
> + if (kvm_ap_instructions_installed() && test_kvm_facility(kvm, 76)) {
> + if (kvm_ap_apxa_installed())
> + kvm->arch.crypto.crycbd |= CRYCB_FORMAT2;
> + else
> + kvm->arch.crypto.crycbd |= CRYCB_FORMAT1;
> + }
> +}
> +EXPORT_SYMBOL(kvm_ap_build_crycbd);
> diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
> index d0c3518..b47ff11 100644
> --- a/arch/s390/kvm/kvm-s390.c
> +++ b/arch/s390/kvm/kvm-s390.c
> @@ -40,6 +40,7 @@
> #include <asm/sclp.h>
> #include <asm/cpacf.h>
> #include <asm/timex.h>
> +#include <asm/kvm-ap.h>
> #include "kvm-s390.h"
> #include "gaccess.h"
>
> @@ -1881,55 +1882,6 @@ long kvm_arch_vm_ioctl(struct file *filp,
> return r;
> }
>
> -static int kvm_s390_query_ap_config(u8 *config)
> -{
> - u32 fcn_code = 0x04000000UL;
> - u32 cc = 0;
> -
> - memset(config, 0, 128);
> - asm volatile(
> - "lgr 0,%1\n"
> - "lgr 2,%2\n"
> - ".long 0xb2af0000\n" /* PQAP(QCI) */
> - "0: ipm %0\n"
> - "srl %0,28\n"
> - "1:\n"
> - EX_TABLE(0b, 1b)
> - : "+r" (cc)
> - : "r" (fcn_code), "r" (config)
> - : "cc", "0", "2", "memory"
> - );
> -
> - return cc;
> -}
> -
> -static int kvm_s390_apxa_installed(void)
> -{
> - u8 config[128];
> - int cc;
> -
> - if (test_facility(12)) {
> - cc = kvm_s390_query_ap_config(config);
> -
> - if (cc)
> - pr_err("PQAP(QCI) failed with cc=%d", cc);
> - else
> - return config[0] & 0x40;
> - }
> -
> - return 0;
> -}
> -
> -static void kvm_s390_set_crycb_format(struct kvm *kvm)
> -{
> - kvm->arch.crypto.crycbd = (__u32)(unsigned long) kvm->arch.crypto.crycb;
> -
> - if (kvm_s390_apxa_installed())
> - kvm->arch.crypto.crycbd |= CRYCB_FORMAT2;
> - else
> - kvm->arch.crypto.crycbd |= CRYCB_FORMAT1;
> -}
> -
> static u64 kvm_s390_get_initial_cpuid(void)
> {
> struct cpuid cpuid;
> @@ -1941,12 +1893,12 @@ static u64 kvm_s390_get_initial_cpuid(void)
>
> static void kvm_s390_crypto_init(struct kvm *kvm)
> {
> + kvm->arch.crypto.crycb = &kvm->arch.sie_page2->crycb;
> + kvm_ap_build_crycbd(kvm);
> +
> if (!test_kvm_facility(kvm, 76))
> return;
>
> - kvm->arch.crypto.crycb = &kvm->arch.sie_page2->crycb;
> - kvm_s390_set_crycb_format(kvm);
> -
> /* Enable AES/DEA protected key functions by default */
> kvm->arch.crypto.aes_kw = 1;
> kvm->arch.crypto.dea_kw = 1;
> @@ -2475,6 +2427,8 @@ void kvm_arch_vcpu_postcreate(struct kvm_vcpu *vcpu)
>
> static void kvm_s390_vcpu_crypto_setup(struct kvm_vcpu *vcpu)
> {
> + vcpu->arch.sie_block->crycbd = vcpu->kvm->arch.crypto.crycbd;
> +
> if (!test_kvm_facility(vcpu->kvm, 76))
> return;
>
> @@ -2484,8 +2438,6 @@ static void kvm_s390_vcpu_crypto_setup(struct kvm_vcpu *vcpu)
> vcpu->arch.sie_block->ecb3 |= ECB3_AES;
> if (vcpu->kvm->arch.crypto.dea_kw)
> vcpu->arch.sie_block->ecb3 |= ECB3_DEA;
> -
> - vcpu->arch.sie_block->crycbd = vcpu->kvm->arch.crypto.crycbd;
> }
>
> void kvm_s390_vcpu_unsetup_cmma(struct kvm_vcpu *vcpu)
--
Pierre Morel
Linux/KVM/QEMU in Böblingen - Germany
Powered by blists - more mailing lists