[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180416192226.p5pg3yvixdulobt4@rob-hp-laptop>
Date: Mon, 16 Apr 2018 14:22:26 -0500
From: Rob Herring <robh@...nel.org>
To: Phil Elwell <phil@...pberrypi.org>
Cc: Woojung Huh <woojung.huh@...rochip.com>,
Microchip Linux Driver Support <UNGLinuxDriver@...rochip.com>,
Mark Rutland <mark.rutland@....com>,
"David S. Miller" <davem@...emloft.net>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Linus Walleij <linus.walleij@...aro.org>,
Andrew Morton <akpm@...ux-foundation.org>,
Randy Dunlap <rdunlap@...radead.org>, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-usb@...r.kernel.org
Subject: Re: [PATCH 4/4] dt-bindings: Document the DT bindings for lan78xx
On Thu, Apr 12, 2018 at 02:55:36PM +0100, Phil Elwell wrote:
> The Microchip LAN78XX family of devices are Ethernet controllers with
> a USB interface. Despite being discoverable devices it can be useful to
> be able to configure them from Device Tree, particularly in low-cost
> applications without an EEPROM or programmed OTP.
>
> Document the supported properties in a bindings file, adding it to
> MAINTAINERS at the same time.
>
> Signed-off-by: Phil Elwell <phil@...pberrypi.org>
> ---
> .../devicetree/bindings/net/microchip,lan78xx.txt | 44 ++++++++++++++++++++++
> MAINTAINERS | 1 +
> 2 files changed, 45 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/microchip,lan78xx.txt
>
> diff --git a/Documentation/devicetree/bindings/net/microchip,lan78xx.txt b/Documentation/devicetree/bindings/net/microchip,lan78xx.txt
> new file mode 100644
> index 0000000..e7d7850
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/microchip,lan78xx.txt
> @@ -0,0 +1,44 @@
> +Microchip LAN78xx Gigabit Ethernet controller
> +
> +The LAN78XX devices are usually configured by programming their OTP or with
> +an external EEPROM, but some platforms (e.g. Raspberry Pi 3 B+) have neither.
> +
> +Please refer to ethernet.txt for a description of common Ethernet bindings.
> +
> +Optional properties:
> +- microchip,eee-enabled: if present, enable Energy Efficient Ethernet support;
I see we have some flags for broken EEE, but nothing already defined to
enable EEE. Seems like this should either be a user option (therefore
not in DT) or we should use the broken EEE properties if this is h/w
dependent.
> +- microchip,led-modes: a two-element vector, with each element configuring
> + the operating mode of an LED. The values supported by the device are;
> + 0: Link/Activity
> + 1: Link1000/Activity
> + 2: Link100/Activity
> + 3: Link10/Activity
> + 4: Link100/1000/Activity
> + 5: Link10/1000/Activity
> + 6: Link10/100/Activity
> + 7: RESERVED
> + 8: Duplex/Collision
> + 9: Collision
> + 10: Activity
> + 11: RESERVED
> + 12: Auto-negotiation Fault
> + 13: RESERVED
> + 14: Off
> + 15: On
> +- microchip,tx-lpi-timer: the delay (in microseconds) between the TX fifo
> + becoming empty and invoking Low Power Idles (default 600).
Needs a unit suffix as defined in property-units.txt.
> +
> +Example:
> +
> + /* Standard configuration for a Raspberry Pi 3 B+ */
> + ethernet: usbether@1 {
> + compatible = "usb424,7800";
> + reg = <1>;
> + microchip,eee-enabled;
> + microchip,tx-lpi-timer = <600>;
> + /*
> + * led0 = 1:link1000/activity
> + * led1 = 6:link10/100/activity
> + */
> + microchip,led-modes = <1 6>;
> + };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 2328eed..b637aad 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -14482,6 +14482,7 @@ M: Microchip Linux Driver Support <UNGLinuxDriver@...rochip.com>
> L: netdev@...r.kernel.org
> S: Maintained
> F: drivers/net/usb/lan78xx.*
> +F: Documentation/devicetree/bindings/net/microchip,lan78xx.txt
>
> USB MASS STORAGE DRIVER
> M: Alan Stern <stern@...land.harvard.edu>
> --
> 2.7.4
>
Powered by blists - more mailing lists