[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180417173038.25510-4-brgl@bgdev.pl>
Date: Tue, 17 Apr 2018 19:30:34 +0200
From: Bartosz Golaszewski <brgl@...ev.pl>
To: Suman Anna <s-anna@...com>, Sekhar Nori <nsekhar@...com>,
Kevin Hilman <khilman@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Russell King <linux@...linux.org.uk>,
David Lechner <david@...hnology.com>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Ohad Ben-Cohen <ohad@...ery.com>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Philipp Zabel <p.zabel@...gutronix.de>
Cc: linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org,
linux-remoteproc@...r.kernel.org,
Bartosz Golaszewski <bgolaszewski@...libre.com>
Subject: [PATCH v6 3/7] remoteproc/davinci: add the missing retval check for clk_enable()
From: Bartosz Golaszewski <bgolaszewski@...libre.com>
The davinci platform is being switched to using the common clock
framework, where clk_enable() can fail. Add the return value check.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@...libre.com>
Acked-by: Suman Anna <s-anna@...com>
Reviewed-by: David Lechner <david@...hnology.com>
---
drivers/remoteproc/da8xx_remoteproc.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/remoteproc/da8xx_remoteproc.c b/drivers/remoteproc/da8xx_remoteproc.c
index bf3b9034c319..2b24291337b7 100644
--- a/drivers/remoteproc/da8xx_remoteproc.c
+++ b/drivers/remoteproc/da8xx_remoteproc.c
@@ -138,6 +138,7 @@ static int da8xx_rproc_start(struct rproc *rproc)
struct device *dev = rproc->dev.parent;
struct da8xx_rproc *drproc = (struct da8xx_rproc *)rproc->priv;
struct clk *dsp_clk = drproc->dsp_clk;
+ int ret;
/* hw requires the start (boot) address be on 1KB boundary */
if (rproc->bootaddr & 0x3ff) {
@@ -148,7 +149,12 @@ static int da8xx_rproc_start(struct rproc *rproc)
writel(rproc->bootaddr, drproc->bootreg);
- clk_enable(dsp_clk);
+ ret = clk_enable(dsp_clk);
+ if (ret) {
+ dev_err(dev, "clk_enable() failed: %d\n", ret);
+ return ret;
+ }
+
davinci_clk_reset_deassert(dsp_clk);
return 0;
--
2.17.0
Powered by blists - more mailing lists