[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1523955115-30164-1-git-send-email-j-keerthy@ti.com>
Date: Tue, 17 Apr 2018 14:21:55 +0530
From: Keerthy <j-keerthy@...com>
To: <broonie@...nel.org>
CC: <j-keerthy@...com>, <linux-kernel@...r.kernel.org>,
<linux-omap@...r.kernel.org>, <t-kristo@...com>
Subject: [PATCH] regulator: lp87565: Enable LP87565_BUCK_CTRL_1_FPWM_MP_0_2
Buck10 is a multi(dual) phase regulator. So as part of enabling it
turn on the LP87565_BUCK_CTRL_1_FPWM_MP_0_2 bit which forces it to
operate always in multiphase and forced-PWM operation mode.
This helps improve the transient voltage response while switching OPP.
Signed-off-by: Keerthy <j-keerthy@...com>
---
Boot tested on dra76-evm and read the ctrl register after probe.
Applies on top of linux-next branch with
https://patchwork.kernel.org/patch/10344529/
on top.
drivers/regulator/lp87565-regulator.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/regulator/lp87565-regulator.c b/drivers/regulator/lp87565-regulator.c
index 9ee08d6..3af588e 100644
--- a/drivers/regulator/lp87565-regulator.c
+++ b/drivers/regulator/lp87565-regulator.c
@@ -178,7 +178,8 @@ static const struct lp87565_regulator regulators[] = {
LP87565_REGULATOR("BUCK10", LP87565_BUCK_10, "buck10", lp87565_buck_ops,
256, LP87565_REG_BUCK0_VOUT, LP87565_BUCK_VSET,
LP87565_REG_BUCK0_CTRL_1,
- LP87565_BUCK_CTRL_1_EN, 3230,
+ LP87565_BUCK_CTRL_1_EN |
+ LP87565_BUCK_CTRL_1_FPWM_MP_0_2, 3230,
buck0_1_2_3_ranges, LP87565_REG_BUCK0_CTRL_2),
LP87565_REGULATOR("BUCK23", LP87565_BUCK_23, "buck23", lp87565_buck_ops,
256, LP87565_REG_BUCK2_VOUT, LP87565_BUCK_VSET,
--
1.9.1
Powered by blists - more mailing lists