[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1523972730-29240-3-git-send-email-fabrice.gasnier@st.com>
Date: Tue, 17 Apr 2018 15:45:28 +0200
From: Fabrice Gasnier <fabrice.gasnier@...com>
To: <alexandre.torgue@...com>, <robh+dt@...nel.org>
CC: <mcoquelin.stm32@...il.com>, <mark.rutland@....com>,
<devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <fabrice.gasnier@...com>
Subject: [PATCH 2/4] ARM: dts: stm32: add PWM pins used on stm32mp157c-ev1 board
stm32mp157c evaluation board has following PWM pins available on GPIO
expansion connector:
- TIM2_CH4 (PA3)
- TIM8_CH4 (PI2)
- TIM12_CH1 (PH6)
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@...com>
---
arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
index 6f044100..867cfeb 100644
--- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
@@ -158,6 +158,33 @@
bias-disable;
};
};
+
+ pwm2_pins_a: pwm2@0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm8_pins_a: pwm8@0 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 2, AF3)>; /* TIM8_CH4 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm12_pins_a: pwm12@0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 6, AF2)>; /* TIM12_CH1 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
};
pinctrl_z: pin-controller-z {
--
1.9.1
Powered by blists - more mailing lists