Message-ID: <41487acb-a67a-8933-d0c3-702c19b0938e@gmail.com>
Date:   Wed, 18 Apr 2018 09:38:39 +0300
From:   Oleksandr Andrushchenko <andr2000@...il.com>
To:     Dongwon Kim <dongwon.kim@...el.com>,
        "Oleksandr_Andrushchenko@...m.com" <Oleksandr_Andrushchenko@...m.com>,
        jgross@...e.com, Artem Mygaiev <Artem_Mygaiev@...m.com>,
        konrad.wilk@...cle.com, airlied@...ux.ie,
        linux-kernel@...r.kernel.org, dri-devel@...ts.freedesktop.org,
        "Potrola, MateuszX" <mateuszx.potrola@...el.com>,
        daniel.vetter@...el.com, xen-devel@...ts.xenproject.org,
        boris.ostrovsky@...cle.com, Matt Roper <matthew.d.roper@...el.com>
Subject: Re: [PATCH 0/1] drm/xen-zcopy: Add Xen zero-copy helper DRM driver

On 04/17/2018 11:57 PM, Dongwon Kim wrote:
> On Tue, Apr 17, 2018 at 09:59:28AM +0200, Daniel Vetter wrote:
>> On Mon, Apr 16, 2018 at 12:29:05PM -0700, Dongwon Kim wrote:
>>> Yeah, I definitely agree on the idea of expanding the use case to the
>>> general domain where dmabuf sharing is used. However, what you are
>>> targetting with proposed changes is identical to the core design of
>>> hyper_dmabuf.
>>>
>>> On top of this basic functionalities, hyper_dmabuf has driver level
>>> inter-domain communication, that is needed for dma-buf remote tracking
>>> (no fence forwarding though), event triggering and event handling, extra
>>> meta data exchange and hyper_dmabuf_id that represents grefs
>>> (grefs are shared implicitly on driver level)
>> This really isn't a positive design aspect of hyperdmabuf imo. The core
>> code in xen-zcopy (ignoring the ioctl side, which will be cleaned up) is
>> very simple & clean.
>>
>> If there's a clear need later on we can extend that. But for now xen-zcopy
>> seems to cover the basic use-case needs, so gets the job done.
>>
>>> Also it is designed with frontend (common core framework) + backend
>>> (hyper visor specific comm and memory sharing) structure for portability.
>>> We just can't limit this feature to Xen because we want to use the same
>>> uapis not only for Xen but also other applicable hypervisor, like ACORN.
>> See the discussion around udmabuf and the needs for kvm. I think trying to
>> make an ioctl/uapi that works for multiple hypervisors is misguided - it
>> likely won't work.
>>
>> On top of that the 2nd hypervisor you're aiming to support is ACRN. That's
>> not even upstream yet, nor have I seen any patches proposing to land linux
>> support for ACRN. Since it's not upstream, it doesn't really matter for
>> upstream consideration. I'm doubting that ACRN will use the same grant
>> references as xen, so the same uapi won't work on ACRN as on Xen anyway.
> Yeah, ACRN doesn't have grant-table. Only Xen supports it. But that is why
> hyper_dmabuf has been architectured with the concept of backend.
> If you look at the structure of backend, you will find that
> backend is just a set of standard function calls as shown here:
>
> struct hyper_dmabuf_bknd_ops {
>          /* backend initialization routine (optional) */
>          int (*init)(void);
>
>          /* backend cleanup routine (optional) */
>          int (*cleanup)(void);
>
>          /* retreiving id of current virtual machine */
>          int (*get_vm_id)(void);
>
>          /* get pages shared via hypervisor-specific method */
>          int (*share_pages)(struct page **pages, int vm_id,
>                             int nents, void **refs_info);
>
>          /* make shared pages unshared via hypervisor specific method */
>          int (*unshare_pages)(void **refs_info, int nents);
>
>          /* map remotely shared pages on importer's side via
>           * hypervisor-specific method
>           */
>          struct page ** (*map_shared_pages)(unsigned long ref, int vm_id,
>                                             int nents, void **refs_info);
>
>          /* unmap and free shared pages on importer's side via
>           * hypervisor-specific method
>           */
>          int (*unmap_shared_pages)(void **refs_info, int nents);
>
>          /* initialize communication environment */
>          int (*init_comm_env)(void);
>
>          void (*destroy_comm)(void);
>
>          /* upstream ch setup (receiving and responding) */
>          int (*init_rx_ch)(int vm_id);
>
>          /* downstream ch setup (transmitting and parsing responses) */
>          int (*init_tx_ch)(int vm_id);
>
>          int (*send_req)(int vm_id, struct hyper_dmabuf_req *req, int wait);
> };
>
> All of these can be mapped with any hypervisor specific implementation.
> We designed backend implementation for Xen using grant-table, Xen event
> and ring buffer communication. For ACRN, we have another backend using Virt-IO
> for both memory sharing and communication.
>
> We tried to define this structure of backend to make it general enough (or
> it can be even modified or extended to support more cases.) so that it can
> fit to other hypervisor cases. Only requirements/expectation on the hypervisor
> are page-level memory sharing and inter-domain communication, which I think
> are standard features of modern hypervisor.
>
> And please review common UAPIs that hyper_dmabuf and xen-zcopy supports. They
> are very general. One is getting FD (dmabuf) and get those shared. The other
> is generating dmabuf from global handle (secure handle hiding gref behind it).
> On top of this, hyper_dmabuf has "unshare" and "query" which are also useful
> for any cases.
>
> So I don't know why we wouldn't want to try to make these standard in most of
> hypervisor cases instead of limiting it to certain hypervisor like Xen.
> Frontend-backend structre is optimal for this I think.
>
>>> So I am wondering we can start with this hyper_dmabuf then modify it for
>>> your use-case if needed and polish and fix any glitches if we want to
>>> to use this for all general dma-buf usecases.
>> Imo xen-zcopy is a much more reasonable starting point for upstream, which
>> can then be extended (if really proven to be necessary).
>>
>>> Also, I still have one unresolved question regarding the export/import flow
>>> in both of hyper_dmabuf and xen-zcopy.
>>>
>>> @danvet: Would this flow (guest1->import existing dmabuf->share underlying
>>> pages->guest2->map shared pages->create/export dmabuf) be acceptable now?
>> I think if you just look at the pages, and make sure you handle the
>> sg_page == NULL case it's ok-ish. It's not great, but mostly it should
>> work. The real trouble with hyperdmabuf was the forwarding of all these
>> calls, instead of just passing around a list of grant references.
> I talked to danvet about this litte bit.
>
> I think there was some misunderstanding on this "forwarding". Exporting
> and importing flow in hyper_dmabuf are basically same as xen-zcopy's. I think
> what made confusion was that importing domain notifies exporting domain when
> there are dmabuf operations (like attach, mapping, detach and release) so that
> exporting domain can track the usage of dmabuf on the importing domain.
>
> I designed this for some basic tracking. We may not need to notify for every
> different activity but if none of them is there, exporting domain can't
> determine if it is ok to unshare the buffer or the originator (like i915)
> can free the object even if it's being accessed in importing domain.
>
> Anyway I really hope we can have enough discussion and resolve all concerns
> before nailing it down.
Let me explain how this works in case of para-virtual display
use-case with xen-zcopy.

1. There are 4 components in the system:
   - displif protocol [1]
   - xen-front - para-virtual DRM driver running in DomU (Guest) VM
   - backend - user-space application running in Dom0
   - xen-zcopy - DRM (as of now) helper driver running in Dom0

2. All the communication between domains happens between xen-front and the
backend, so it is possible to implement para-virtual display use-case
without xen-zcopy at all (this is why it is a helper driver), but in 
this case
memory copying occurs (this is out of scope for this discussion).

3. To better understand security issues let's see what use-cases we have:

3.1 xen-front exports its dma-buf (dumb) to the backend

In this case there are no security issues at all as Dom0 (backend side)
will use DomU's pages (xen-front side) and Dom0 is a trusted domain, so
we assume it won't hurt DomU. Even if DomU dies nothing bad happens to Dom0.
If DomU misbehaves it can only write to its own pages shared with Dom0, 
but still
cannot go beyond that, e.g. it can't access Dom0's memory.

3.2 Backend exports dma-buf to xen-front

In this case Dom0 pages are shared with DomU. As before, DomU can only write
to these pages, not any other page from Dom0, so it can be still 
considered safe.
But, the following must be considered (highlighted in xen-front's Kernel
documentation):
  - If guest domain dies then pages/grants received from the backend cannot
    be claimed back - think of it as memory lost to Dom0 (won't be used 
for any
    other guest)
  - Misbehaving guest may send too many requests to the backend exhausting
    its grant references and memory (consider this from security POV). 
As the
    backend runs in the trusted domain we also assume that it is trusted 
as well,
    e.g. must take measures to prevent DDoS attacks.

4. xen-front/backend/xen-zcopy synchronization

4.1. As I already said in 2) all the inter VM communication happens between
xen-front and the backend, xen-zcopy is NOT involved in that.
When xen-front wants to destroy a display buffer (dumb/dma-buf) it issues a
XENDISPL_OP_DBUF_DESTROY command (opposite to XENDISPL_OP_DBUF_CREATE).
This call is synchronous, so xen-front expects that backend does free the
buffer pages on return.

4.2. Backend, on XENDISPL_OP_DBUF_DESTROY:
   - closes all dumb handles/fd's of the buffer according to [3]
   - issues DRM_IOCTL_XEN_ZCOPY_DUMB_WAIT_FREE IOCTL to xen-zcopy to 
make sure
     the buffer is freed (think of it as it waits for dma-buf->release 
callback)
   - replies to xen-front that the buffer can be destroyed.
This way deletion of the buffer happens synchronously on both Dom0 and DomU
sides. In case if DRM_IOCTL_XEN_ZCOPY_DUMB_WAIT_FREE returns with 
time-out error
(BTW, wait time is a parameter of this IOCTL), Xen will defer grant 
reference
removal and will retry later until those are free.

Hope this helps understand how buffers are synchronously deleted in case
of xen-zcopy with a single protocol command.

I think the above logic can also be re-used by the hyper-dmabuf driver with
some additional work:

1. xen-zcopy can be split into 2 parts and extend:
1.1. Xen gntdev driver [4], [5] to allow creating dma-buf from grefs and 
vise versa,
implement "wait" ioctl (wait for dma-buf->release): currently these are
DRM_XEN_ZCOPY_DUMB_FROM_REFS, DRM_XEN_ZCOPY_DUMB_TO_REFS and 
DRM_XEN_ZCOPY_DUMB_WAIT_FREE
1.2. Xen balloon driver [6] to allow allocating contiguous buffers (not 
needed
by current hyper-dmabuf, but is a must for xen-zcopy use-cases)

2. Then hyper-dmabuf uses Xen gntdev driver for Xen specific dma-buf 
alloc/free/wait

3. hyper-dmabuf uses its own protocol between VMs to communicate buffer
creation/deletion and whatever else is needed (fences?).

To Xen community: please think of dma-buf here as of a buffer 
representation mechanism,
e.g. at the end of the day it's just a set of pages.

Thank you,
Oleksandr
>> -Daniel
>>
>>> Regards,
>>> DW
>>>   
>>> On Mon, Apr 16, 2018 at 05:33:46PM +0300, Oleksandr Andrushchenko wrote:
>>>> Hello, all!
>>>>
>>>> After discussing xen-zcopy and hyper-dmabuf [1] approaches
>>>>
>>>> it seems that xen-zcopy can be made not depend on DRM core any more
>>>>
>>>> and be dma-buf centric (which it in fact is).
>>>>
>>>> The DRM code was mostly there for dma-buf's FD import/export
>>>>
>>>> with DRM PRIME UAPI and with DRM use-cases in mind, but it comes out that if
>>>>
>>>> the proposed 2 IOCTLs (DRM_XEN_ZCOPY_DUMB_FROM_REFS and
>>>> DRM_XEN_ZCOPY_DUMB_TO_REFS)
>>>>
>>>> are extended to also provide a file descriptor of the corresponding dma-buf,
>>>> then
>>>>
>>>> PRIME stuff in the driver is not needed anymore.
>>>>
>>>> That being said, xen-zcopy can safely be detached from DRM and moved from
>>>>
>>>> drivers/gpu/drm/xen into drivers/xen/dma-buf-backend(?).
>>>>
>>>> This driver then becomes a universal way to turn any shared buffer between
>>>> Dom0/DomD
>>>>
>>>> and DomU(s) into a dma-buf, e.g. one can create a dma-buf from any grant
>>>> references
>>>>
>>>> or represent a dma-buf as grant-references for export.
>>>>
>>>> This way the driver can be used not only for DRM use-cases, but also for
>>>> other
>>>>
>>>> use-cases which may require zero copying between domains.
>>>>
>>>> For example, the use-cases we are about to work in the nearest future will
>>>> use
>>>>
>>>> V4L, e.g. we plan to support cameras, codecs etc. and all these will benefit
>>>>
>>>> from zero copying much. Potentially, even block/net devices may benefit,
>>>>
>>>> but this needs some evaluation.
>>>>
>>>>
>>>> I would love to hear comments for authors of the hyper-dmabuf
>>>>
>>>> and Xen community, as well as DRI-Devel and other interested parties.
>>>>
>>>>
>>>> Thank you,
>>>>
>>>> Oleksandr
>>>>
>>>>
>>>> On 03/29/2018 04:19 PM, Oleksandr Andrushchenko wrote:
>>>>> From: Oleksandr Andrushchenko <oleksandr_andrushchenko@...m.com>
>>>>>
>>>>> Hello!
>>>>>
>>>>> When using Xen PV DRM frontend driver then on backend side one will need
>>>>> to do copying of display buffers' contents (filled by the
>>>>> frontend's user-space) into buffers allocated at the backend side.
>>>>> Taking into account the size of display buffers and frames per seconds
>>>>> it may result in unneeded huge data bus occupation and performance loss.
>>>>>
>>>>> This helper driver allows implementing zero-copying use-cases
>>>>> when using Xen para-virtualized frontend display driver by
>>>>> implementing a DRM/KMS helper driver running on backend's side.
>>>>> It utilizes PRIME buffers API to share frontend's buffers with
>>>>> physical device drivers on backend's side:
>>>>>
>>>>>   - a dumb buffer created on backend's side can be shared
>>>>>     with the Xen PV frontend driver, so it directly writes
>>>>>     into backend's domain memory (into the buffer exported from
>>>>>     DRM/KMS driver of a physical display device)
>>>>>   - a dumb buffer allocated by the frontend can be imported
>>>>>     into physical device DRM/KMS driver, thus allowing to
>>>>>     achieve no copying as well
>>>>>
>>>>> For that reason number of IOCTLs are introduced:
>>>>>   -  DRM_XEN_ZCOPY_DUMB_FROM_REFS
>>>>>      This will create a DRM dumb buffer from grant references provided
>>>>>      by the frontend
>>>>>   - DRM_XEN_ZCOPY_DUMB_TO_REFS
>>>>>     This will grant references to a dumb/display buffer's memory provided
>>>>>     by the backend
>>>>>   - DRM_XEN_ZCOPY_DUMB_WAIT_FREE
>>>>>     This will block until the dumb buffer with the wait handle provided
>>>>>     be freed
>>>>>
>>>>> With this helper driver I was able to drop CPU usage from 17% to 3%
>>>>> on Renesas R-Car M3 board.
>>>>>
>>>>> This was tested with Renesas' Wayland-KMS and backend running as DRM master.
>>>>>
>>>>> Thank you,
>>>>> Oleksandr
>>>>>
>>>>> Oleksandr Andrushchenko (1):
>>>>>    drm/xen-zcopy: Add Xen zero-copy helper DRM driver
>>>>>
>>>>>   Documentation/gpu/drivers.rst               |   1 +
>>>>>   Documentation/gpu/xen-zcopy.rst             |  32 +
>>>>>   drivers/gpu/drm/xen/Kconfig                 |  25 +
>>>>>   drivers/gpu/drm/xen/Makefile                |   5 +
>>>>>   drivers/gpu/drm/xen/xen_drm_zcopy.c         | 880 ++++++++++++++++++++++++++++
>>>>>   drivers/gpu/drm/xen/xen_drm_zcopy_balloon.c | 154 +++++
>>>>>   drivers/gpu/drm/xen/xen_drm_zcopy_balloon.h |  38 ++
>>>>>   include/uapi/drm/xen_zcopy_drm.h            | 129 ++++
>>>>>   8 files changed, 1264 insertions(+)
>>>>>   create mode 100644 Documentation/gpu/xen-zcopy.rst
>>>>>   create mode 100644 drivers/gpu/drm/xen/xen_drm_zcopy.c
>>>>>   create mode 100644 drivers/gpu/drm/xen/xen_drm_zcopy_balloon.c
>>>>>   create mode 100644 drivers/gpu/drm/xen/xen_drm_zcopy_balloon.h
>>>>>   create mode 100644 include/uapi/drm/xen_zcopy_drm.h
>>>>>
>>>> [1]
>>>> https://lists.xenproject.org/archives/html/xen-devel/2018-02/msg01202.html
>>> _______________________________________________
>>> dri-devel mailing list
>>> dri-devel@...ts.freedesktop.org
>>> https://lists.freedesktop.org/mailman/listinfo/dri-devel
>> -- 
>> Daniel Vetter
>> Software Engineer, Intel Corporation
>> http://blog.ffwll.ch

[1] 
https://elixir.bootlin.com/linux/v4.17-rc1/source/include/xen/interface/io/displif.h
[2] 
https://elixir.bootlin.com/linux/v4.17-rc1/source/include/xen/interface/io/displif.h#L539
[3] 
https://elixir.bootlin.com/linux/v4.17-rc1/source/drivers/gpu/drm/drm_prime.c#L39
[4] https://elixir.bootlin.com/linux/v4.17-rc1/source/drivers/xen/gntdev.c
[5] 
https://elixir.bootlin.com/linux/v4.17-rc1/source/include/uapi/xen/gntdev.h
[6] https://elixir.bootlin.com/linux/v4.17-rc1/source/drivers/xen/balloon.c

Powered by blists - more mailing lists