linux-kernel - [PATCH] clk: imx6ull: use OSC clock during AXI rate change

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20180418124908.3079-1-stefan@agner.ch>
Date:   Wed, 18 Apr 2018 14:49:08 +0200
From:   Stefan Agner <stefan@...er.ch>
To:     shawnguo@...nel.org, kernel@...gutronix.de
Cc:     fabio.estevam@....com, mturquette@...libre.com, sboyd@...nel.org,
        linux-arm-kernel@...ts.infradead.org, linux-clk@...r.kernel.org,
        linux-kernel@...r.kernel.org, Stefan Agner <stefan@...er.ch>
Subject: [PATCH] clk: imx6ull: use OSC clock during AXI rate change

On i.MX6 ULL using PLL3 seems to cause a freeze when setting
the parent to IMX6UL_CLK_PLL3_USB_OTG. This only seems to appear
since commit 6f9575e55632 ("clk: imx: Add CLK_IS_CRITICAL flag
for busy divider and busy mux"), probably because the clock is
now forced to be on.

Fixes: 6f9575e55632("clk: imx: Add CLK_IS_CRITICAL flag for busy divider and busy mux")
Signed-off-by: Stefan Agner <stefan@...er.ch>
---
This addresses a regression ssen on v4.17-rc1 where the kernel
boots during clock initialization, see also:
https://patchwork.kernel.org/patch/10295927/

 drivers/clk/imx/clk-imx6ul.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/imx/clk-imx6ul.c b/drivers/clk/imx/clk-imx6ul.c
index 114ecbb94ec5..12320118f8de 100644
--- a/drivers/clk/imx/clk-imx6ul.c
+++ b/drivers/clk/imx/clk-imx6ul.c
@@ -464,7 +464,7 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
 	clk_set_rate(clks[IMX6UL_CLK_AHB], 99000000);
 
 	/* Change periph_pre clock to pll2_bus to adjust AXI rate to 264MHz */
-	clk_set_parent(clks[IMX6UL_CLK_PERIPH_CLK2_SEL], clks[IMX6UL_CLK_PLL3_USB_OTG]);
+	clk_set_parent(clks[IMX6UL_CLK_PERIPH_CLK2_SEL], clks[IMX6UL_CLK_OSC]);
 	clk_set_parent(clks[IMX6UL_CLK_PERIPH], clks[IMX6UL_CLK_PERIPH_CLK2]);
 	clk_set_parent(clks[IMX6UL_CLK_PERIPH_PRE], clks[IMX6UL_CLK_PLL2_BUS]);
 	clk_set_parent(clks[IMX6UL_CLK_PERIPH], clks[IMX6UL_CLK_PERIPH_PRE]);
-- 
2.17.0