| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <2efb90f1d86529a51e566824566016b9430f56ea.1524054807.git.baolin.wang@linaro.org>
Date: Thu, 19 Apr 2018 10:00:50 +0800
From: Baolin Wang <baolin.wang@...aro.org>
To: dan.j.williams@...el.com, vinod.koul@...el.com
Cc: eric.long@...eadtrum.com, broonie@...nel.org,
dmaengine@...r.kernel.org, linux-kernel@...r.kernel.org,
baolin.wang@...aro.org
Subject: [PATCH v2 5/5] dmaengine: sprd: Add 'device_config' and 'device_prep_slave_sg' interfaces
From: Eric Long <eric.long@...eadtrum.com>
This patch adds the 'device_config' and 'device_prep_slave_sg' interfaces
for users to configure DMA.
Signed-off-by: Eric Long <eric.long@...eadtrum.com>
Signed-off-by: Baolin Wang <baolin.wang@...aro.org>
---
Changes since v1:
- The request mode and interrupt type will be passed from flags.
- Add sprd_dma_get_step() to get src/dst step.
- Add sprd_dma_get_datawidth() to convert data width values which
can be used by Spreadtrum DMA.
---
drivers/dma/sprd-dma.c | 115 ++++++++++++++++++++++++++++++++++++++++++
include/linux/dma/sprd-dma.h | 4 ++
2 files changed, 119 insertions(+)
diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c
index 23846ed..f2598ed 100644
--- a/drivers/dma/sprd-dma.c
+++ b/drivers/dma/sprd-dma.c
@@ -590,6 +590,47 @@ static void sprd_dma_issue_pending(struct dma_chan *chan)
spin_unlock_irqrestore(&schan->vc.lock, flags);
}
+static enum sprd_dma_datawidth
+sprd_dma_get_datawidth(enum dma_slave_buswidth buswidth)
+{
+ switch (buswidth) {
+ case DMA_SLAVE_BUSWIDTH_1_BYTE:
+ return SPRD_DMA_DATAWIDTH_1_BYTE;
+
+ case DMA_SLAVE_BUSWIDTH_2_BYTES:
+ return SPRD_DMA_DATAWIDTH_2_BYTES;
+
+ case DMA_SLAVE_BUSWIDTH_4_BYTES:
+ return SPRD_DMA_DATAWIDTH_4_BYTES;
+
+ case DMA_SLAVE_BUSWIDTH_8_BYTES:
+ return SPRD_DMA_DATAWIDTH_8_BYTES;
+
+ default:
+ return SPRD_DMA_DATAWIDTH_4_BYTES;
+ }
+}
+
+static u32 sprd_dma_get_step(enum sprd_dma_datawidth datawidth)
+{
+ switch (datawidth) {
+ case SPRD_DMA_DATAWIDTH_1_BYTE:
+ return SPRD_DMA_BYTE_STEP;
+
+ case SPRD_DMA_DATAWIDTH_2_BYTES:
+ return SPRD_DMA_SHORT_STEP;
+
+ case SPRD_DMA_DATAWIDTH_4_BYTES:
+ return SPRD_DMA_WORD_STEP;
+
+ case SPRD_DMA_DATAWIDTH_8_BYTES:
+ return SPRD_DMA_DWORD_STEP;
+
+ default:
+ return SPRD_DMA_DWORD_STEP;
+ }
+}
+
static int sprd_dma_config(struct dma_chan *chan, struct sprd_dma_desc *sdesc,
struct sprd_dma_config *slave_cfg)
{
@@ -711,6 +752,78 @@ static int sprd_dma_config(struct dma_chan *chan, struct sprd_dma_desc *sdesc,
return vchan_tx_prep(&schan->vc, &sdesc->vd, flags);
}
+static struct dma_async_tx_descriptor *
+sprd_dma_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
+ unsigned int sglen, enum dma_transfer_direction dir,
+ unsigned long flags, void *context)
+{
+ struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
+ struct sprd_dma_config *slave_cfg = &schan->slave_cfg;
+ struct sprd_dma_desc *sdesc;
+ struct scatterlist *sg;
+ int ret, i;
+
+ /* TODO: now we only support one sg for each DMA configuration. */
+ if (!is_slave_direction(dir) || sglen > 1)
+ return NULL;
+
+ sdesc = kzalloc(sizeof(*sdesc), GFP_NOWAIT);
+ if (!sdesc)
+ return NULL;
+
+ for_each_sg(sgl, sg, sglen, i) {
+ if (dir == DMA_MEM_TO_DEV) {
+ slave_cfg->src_addr = sg_dma_address(sg);
+ slave_cfg->src_step =
+ sprd_dma_get_step(slave_cfg->src_datawidth);
+ slave_cfg->dst_step = SPRD_DMA_NONE_STEP;
+ } else {
+ slave_cfg->dst_addr = sg_dma_address(sg);
+ slave_cfg->src_step = SPRD_DMA_NONE_STEP;
+ slave_cfg->dst_step =
+ sprd_dma_get_step(slave_cfg->dst_datawidth);
+ }
+
+ slave_cfg->block_len = sg_dma_len(sg);
+ slave_cfg->transcation_len = sg_dma_len(sg);
+ }
+
+ slave_cfg->req_mode =
+ (flags >> SPRD_DMA_REQ_SHIFT) & SPRD_DMA_REQ_MODE_MASK;
+ slave_cfg->int_mode = flags & SPRD_DMA_INT_MASK;
+
+ ret = sprd_dma_config(chan, sdesc, slave_cfg);
+ if (ret) {
+ kfree(sdesc);
+ return NULL;
+ }
+
+ return vchan_tx_prep(&schan->vc, &sdesc->vd, flags);
+}
+
+static int sprd_dma_slave_config(struct dma_chan *chan,
+ struct dma_slave_config *config)
+{
+ struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
+ struct sprd_dma_config *slave_cfg = &schan->slave_cfg;
+
+ if (!is_slave_direction(config->direction))
+ return -EINVAL;
+
+ memset(slave_cfg, 0, sizeof(*slave_cfg));
+
+ slave_cfg->slave_id = config->slave_id;
+ slave_cfg->src_addr = config->src_addr;
+ slave_cfg->dst_addr = config->dst_addr;
+ slave_cfg->fragment_len = config->src_maxburst;
+ slave_cfg->src_datawidth =
+ sprd_dma_get_datawidth(config->src_addr_width);
+ slave_cfg->dst_datawidth =
+ sprd_dma_get_datawidth(config->dst_addr_width);
+
+ return 0;
+}
+
static int sprd_dma_pause(struct dma_chan *chan)
{
struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
@@ -838,6 +951,8 @@ static int sprd_dma_probe(struct platform_device *pdev)
sdev->dma_dev.device_tx_status = sprd_dma_tx_status;
sdev->dma_dev.device_issue_pending = sprd_dma_issue_pending;
sdev->dma_dev.device_prep_dma_memcpy = sprd_dma_prep_dma_memcpy;
+ sdev->dma_dev.device_prep_slave_sg = sprd_dma_prep_slave_sg;
+ sdev->dma_dev.device_config = sprd_dma_slave_config;
sdev->dma_dev.device_pause = sprd_dma_pause;
sdev->dma_dev.device_resume = sprd_dma_resume;
sdev->dma_dev.device_terminate_all = sprd_dma_terminate_all;
diff --git a/include/linux/dma/sprd-dma.h b/include/linux/dma/sprd-dma.h
index c545162..b0115e3 100644
--- a/include/linux/dma/sprd-dma.h
+++ b/include/linux/dma/sprd-dma.h
@@ -3,6 +3,10 @@
#ifndef _SPRD_DMA_H_
#define _SPRD_DMA_H_
+#define SPRD_DMA_REQ_SHIFT 16
+#define SPRD_DMA_FLAGS(req_mode, int_type) \
+ ((req_mode) << SPRD_DMA_REQ_SHIFT | (int_type))
+
/*
* enum sprd_dma_req_mode: define the DMA request mode
* @SPRD_DMA_FRAG_REQ: fragment request mode
--
1.7.9.5
Powered by blists - more mailing lists