[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <7ho9if3wo3.fsf@baylibre.com>
Date: Thu, 19 Apr 2018 10:58:52 -0700
From: Kevin Hilman <khilman@...libre.com>
To: Yixun Lan <yixun.lan@...ogic.com>
Cc: Nan Li <nan.li@...ogic.com>, Carlo Caione <carlo@...one.org>,
Jerome Brunet <jbrunet@...libre.com>,
Heiner Kallweit <hkallweit1@...il.com>,
Rob Herring <robh@...nel.org>, <linux-mmc@...r.kernel.org>,
<linux-amlogic@...ts.infradead.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>
Subject: Re: [PATCH v2] ARM64: dts: meson-axg: enable the eMMC controller
Yixun Lan <yixun.lan@...ogic.com> writes:
> From: Nan Li <nan.li@...ogic.com>
>
> The IP of eMMC controller in AXG is similiar to Meson-GX series.
> Here we add the initial support of the HS200 mode with
> clock running at 166MHz (to be safe), since we found some eMMC chip
> fail to run at 200MHz due to tunning phase error.
>
> Signed-off-by: Nan Li <nan.li@...ogic.com>
> Signed-off-by: Yixun Lan <yixun.lan@...ogic.com>
Applied to v4.18/dt64
> ---
> Hi Kevin
> Please note this patch actually depend on the eMMC driver here [0].
> Still a few problem to solve, to improve the tuning phase driver to make
> the clock running at 200MHz, and to further support the HS400 mode.
> Anyway, this patch itself is quite independent.
The driver changes are queued for v4.18 also. Good!
Kevin
Powered by blists - more mailing lists