Message-ID: <2b2377b3-c230-74a4-51ef-647e69ddce74@oracle.com>
Date:   Fri, 20 Apr 2018 12:15:36 -0600
From:   Tom Hromatka <tom.hromatka@...cle.com>
To:     Wim Coekaerts <wim.coekaerts@...cle.com>, davem@...emloft.net
Cc:     sparclinux@...r.kernel.org, arnd@...db.de,
        gregkh@...uxfoundation.org, linux-kernel@...r.kernel.org,
        shuah@...nel.org, linux-kselftest@...r.kernel.org,
        allen.pais@...cle.com, khalid.aziz@...cle.com,
        shannon.nelson@...cle.com, anthony.yznaga@...cle.com
Subject: Re: [PATCH v2 2/2] selftests: sparc64: char: Selftest for privileged
 ADI driver

Doggonit!  Thanks, Wim.

I'll send out a new revision shortly.

Tom



On 04/20/2018 12:08 PM, Wim Coekaerts wrote:
> Tom, you used the wrong GPL license header. Please fix that to be v2 
> not v3.
>
> The
>
> +# SPDX-License-Identifier: GPL-2.0
>
> is correct but the adi-test.c one is not.
>
> On 04/20/2018 10:34 AM, Tom Hromatka wrote:
>> Add a selftest for the sparc64 privileged ADI driver.  These
>> tests verify the read(), pread(), write(), pwrite(), and seek()
>> functionality of the driver.  The tests also report simple
>> performance statistics:
>>
>>          Syscall Call    AvgTime AvgSize
>>                  Count   (ticks) (bytes)
>>          -------------------------------
>>          read          3  119638    8133
>>          pread         4  118164    6741
>>          write         3  339442    8133
>>          pwrite        4  280134    6741
>>          seek         10    2919       0
>>          Pass 8 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0
>>
>> Signed-off-by: Tom Hromatka <tom.hromatka@...cle.com>
>> Reviewed-by: Allen Pais <allen.pais@...cle.com>
>> ---
>>   tools/testing/selftests/Makefile                   |   1 +
>>   tools/testing/selftests/sparc64/Makefile           |  46 ++
>>   tools/testing/selftests/sparc64/drivers/.gitignore |   1 +
>>   tools/testing/selftests/sparc64/drivers/Makefile   |  15 +
>>   tools/testing/selftests/sparc64/drivers/adi-test.c | 732 
>> +++++++++++++++++++++
>>   .../selftests/sparc64/drivers/drivers_test.sh      |  30 +
>>   tools/testing/selftests/sparc64/run.sh             |   3 +
>>   7 files changed, 828 insertions(+)
>>   create mode 100644 tools/testing/selftests/sparc64/Makefile
>>   create mode 100644 tools/testing/selftests/sparc64/drivers/.gitignore
>>   create mode 100644 tools/testing/selftests/sparc64/drivers/Makefile
>>   create mode 100644 tools/testing/selftests/sparc64/drivers/adi-test.c
>>   create mode 100755 
>> tools/testing/selftests/sparc64/drivers/drivers_test.sh
>>   create mode 100755 tools/testing/selftests/sparc64/run.sh
>>
>> diff --git a/tools/testing/selftests/Makefile 
>> b/tools/testing/selftests/Makefile
>> index 7442dfb73b7f..94da632579e7 100644
>> --- a/tools/testing/selftests/Makefile
>> +++ b/tools/testing/selftests/Makefile
>> @@ -28,6 +28,7 @@ TARGETS += ptrace
>>   TARGETS += seccomp
>>   TARGETS += sigaltstack
>>   TARGETS += size
>> +TARGETS += sparc64
>>   TARGETS += splice
>>   TARGETS += static_keys
>>   TARGETS += sync
>> diff --git a/tools/testing/selftests/sparc64/Makefile 
>> b/tools/testing/selftests/sparc64/Makefile
>> new file mode 100644
>> index 000000000000..2082eeffd779
>> --- /dev/null
>> +++ b/tools/testing/selftests/sparc64/Makefile
>> @@ -0,0 +1,46 @@
>> +SUBDIRS := drivers
>> +
>> +TEST_PROGS := run.sh
>> +
>> +.PHONY: all clean
>> +
>> +include ../lib.mk
>> +
>> +all:
>> +    @for DIR in $(SUBDIRS); do        \
>> +        BUILD_TARGET=$(OUTPUT)/$$DIR;    \
>> +        mkdir $$BUILD_TARGET  -p;    \
>> +        make OUTPUT=$$BUILD_TARGET -C $$DIR $@;\
>> +        #SUBDIR test prog name should be in the form: SUBDIR_test.sh \
>> +        TEST=$$DIR"_test.sh"; \
>> +        if [ -e $$DIR/$$TEST ]; then \
>> +            rsync -a $$DIR/$$TEST $$BUILD_TARGET/; \
>> +        fi \
>> +    done
>> +
>> +override define RUN_TESTS
>> +    @cd $(OUTPUT); ./run.sh
>> +endef
>> +
>> +override define INSTALL_RULE
>> +    mkdir -p $(INSTALL_PATH)
>> +    install -t $(INSTALL_PATH) $(TEST_PROGS) $(TEST_PROGS_EXTENDED) 
>> $(TEST_FILES)
>> +
>> +    @for SUBDIR in $(SUBDIRS); do \
>> +        BUILD_TARGET=$(OUTPUT)/$$SUBDIR;    \
>> +        mkdir $$BUILD_TARGET  -p;    \
>> +        $(MAKE) OUTPUT=$$BUILD_TARGET -C $$SUBDIR 
>> INSTALL_PATH=$(INSTALL_PATH)/$$SUBDIR install; \
>> +    done;
>> +endef
>> +
>> +override define EMIT_TESTS
>> +    echo "./run.sh"
>> +endef
>> +
>> +override define CLEAN
>> +    @for DIR in $(SUBDIRS); do        \
>> +        BUILD_TARGET=$(OUTPUT)/$$DIR;    \
>> +        mkdir $$BUILD_TARGET  -p;    \
>> +        make OUTPUT=$$BUILD_TARGET -C $$DIR $@;\
>> +    done
>> +endef
>> diff --git a/tools/testing/selftests/sparc64/drivers/.gitignore 
>> b/tools/testing/selftests/sparc64/drivers/.gitignore
>> new file mode 100644
>> index 000000000000..90e835ed74e6
>> --- /dev/null
>> +++ b/tools/testing/selftests/sparc64/drivers/.gitignore
>> @@ -0,0 +1 @@
>> +adi-test
>> diff --git a/tools/testing/selftests/sparc64/drivers/Makefile 
>> b/tools/testing/selftests/sparc64/drivers/Makefile
>> new file mode 100644
>> index 000000000000..6264f40bbdbc
>> --- /dev/null
>> +++ b/tools/testing/selftests/sparc64/drivers/Makefile
>> @@ -0,0 +1,15 @@
>> +
>> +INCLUDEDIR := -I.
>> +CFLAGS := $(CFLAGS) $(INCLUDEDIR) -Wall -O2 -g
>> +
>> +TEST_GEN_FILES := adi-test
>> +
>> +all: $(TEST_GEN_FILES)
>> +
>> +$(TEST_GEN_FILES): adi-test.c
>> +
>> +TEST_PROGS := drivers_test.sh
>> +
>> +include ../../lib.mk
>> +
>> +$(OUTPUT)/adi-test: adi-test.c
>> diff --git a/tools/testing/selftests/sparc64/drivers/adi-test.c 
>> b/tools/testing/selftests/sparc64/drivers/adi-test.c
>> new file mode 100644
>> index 000000000000..22ffd06fba24
>> --- /dev/null
>> +++ b/tools/testing/selftests/sparc64/drivers/adi-test.c
>> @@ -0,0 +1,732 @@
>> +/*
>> + * Copyright (c) 2017, 2018, Oracle and/or its affiliates. All 
>> rights reserved.
>> + * Author: Tom Hromatka <tom.hromatka@...cle.com>
>> + *
>> + * This program is free software: you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation, either version 3 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program.  If not, see 
>> <http://www.gnu.org/licenses/>.
>> + */
>> +#include <linux/kernel.h>
>> +#include <errno.h>
>> +#include <fcntl.h>
>> +#include <stdarg.h>
>> +#include <stdio.h>
>> +#include <stdlib.h>
>> +#include <string.h>
>> +#include <sys/syscall.h>
>> +#include <sys/types.h>
>> +#include <sys/stat.h>
>> +#include <unistd.h>
>> +
>> +#include "../../kselftest.h"
>> +
>> +#define DEBUG_LEVEL_1_BIT    (0x0001)
>> +#define DEBUG_LEVEL_2_BIT    (0x0002)
>> +#define DEBUG_LEVEL_3_BIT    (0x0004)
>> +#define DEBUG_LEVEL_4_BIT    (0x0008)
>> +#define DEBUG_TIMING_BIT    (0x1000)
>> +
>> +#ifndef ARRAY_SIZE
>> +# define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
>> +#endif
>> +
>> +/* bit mask of enabled bits to print */
>> +#define DEBUG 0x0001
>> +
>> +#define DEBUG_PRINT_L1(...)    debug_print(DEBUG_LEVEL_1_BIT, 
>> __VA_ARGS__)
>> +#define DEBUG_PRINT_L2(...)    debug_print(DEBUG_LEVEL_2_BIT, 
>> __VA_ARGS__)
>> +#define DEBUG_PRINT_L3(...)    debug_print(DEBUG_LEVEL_3_BIT, 
>> __VA_ARGS__)
>> +#define DEBUG_PRINT_L4(...)    debug_print(DEBUG_LEVEL_4_BIT, 
>> __VA_ARGS__)
>> +#define DEBUG_PRINT_T(...)    debug_print(DEBUG_TIMING_BIT, 
>> __VA_ARGS__)
>> +
>> +static void debug_print(int level, const char *s, ...)
>> +{
>> +    va_list args;
>> +
>> +    va_start(args, s);
>> +
>> +    if (DEBUG & level)
>> +        vfprintf(stdout, s, args);
>> +    va_end(args);
>> +}
>> +
>> +#ifndef min
>> +#define min(x, y) ((x) < (y) ? x : y)
>> +#endif
>> +
>> +#define RETURN_FROM_TEST(_ret) \
>> +    do { \
>> +        DEBUG_PRINT_L1( \
>> +            "\tTest %s returned %d\n", __func__, _ret); \
>> +        return _ret; \
>> +    } while (0)
>> +
>> +#define ADI_BLKSZ    64
>> +#define ADI_MAX_VERSION    15
>> +
>> +#define TEST_STEP_FAILURE(_ret) \
>> +    do { \
>> +        fprintf(stderr, "\tTest step failure: %d at %s:%d\n", \
>> +            _ret, __func__, __LINE__); \
>> +        goto out; \
>> +    } while (0)
>> +
>> +#define RDTICK(_x) \
>> +    asm volatile(" rd %%tick, %0\n" : "=r" (_x))
>> +
>> +static int random_version(void)
>> +{
>> +    long tick;
>> +
>> +    RDTICK(tick);
>> +
>> +    return tick % (ADI_MAX_VERSION + 1);
>> +}
>> +
>> +#define MAX_RANGES_SUPPORTED    5
>> +static const char system_ram_str[] = "System RAM\n";
>> +static int range_count;
>> +static unsigned long long int start_addr[MAX_RANGES_SUPPORTED];
>> +static unsigned long long int   end_addr[MAX_RANGES_SUPPORTED];
>> +
>> +struct stats {
>> +    char        name[16];
>> +    unsigned long    total;
>> +    unsigned long    count;
>> +    unsigned long    bytes;
>> +};
>> +
>> +static struct stats read_stats = {
>> +    .name = "read", .total = 0, .count = 0, .bytes = 0};
>> +static struct stats pread_stats = {
>> +    .name = "pread", .total = 0, .count = 0, .bytes = 0};
>> +static struct stats write_stats = {
>> +    .name = "write", .total = 0, .count = 0, .bytes = 0};
>> +static struct stats pwrite_stats = {
>> +    .name = "pwrite", .total = 0, .count = 0, .bytes = 0};
>> +static struct stats seek_stats = {
>> +    .name = "seek", .total = 0, .count = 0, .bytes = 0};
>> +
>> +static void update_stats(struct stats * const ustats,
>> +             unsigned long measurement, unsigned long bytes)
>> +{
>> +    ustats->total += measurement;
>> +    ustats->bytes += bytes;
>> +    ustats->count++;
>> +}
>> +
>> +static void print_ustats(const struct stats * const ustats)
>> +{
>> +    DEBUG_PRINT_L1("%s\t%7d\t%7.0f\t%7.0f\n",
>> +               ustats->name, ustats->count,
>> +               (float)ustats->total / (float)ustats->count,
>> +               (float)ustats->bytes / (float)ustats->count);
>> +}
>> +
>> +static void print_stats(void)
>> +{
>> +    DEBUG_PRINT_L1("\nSyscall\tCall\tAvgTime\tAvgSize\n"
>> +               "\tCount\t(ticks)\t(bytes)\n"
>> +               "-------------------------------\n");
>> +
>> +    print_ustats(&read_stats);
>> +    print_ustats(&pread_stats);
>> +    print_ustats(&write_stats);
>> +    print_ustats(&pwrite_stats);
>> +    print_ustats(&seek_stats);
>> +}
>> +
>> +static int build_memory_map(void)
>> +{
>> +    char line[256];
>> +    FILE *fp;
>> +    int i;
>> +
>> +    range_count = 0;
>> +
>> +    fp = fopen("/proc/iomem", "r");
>> +    if (!fp) {
>> +        fprintf(stderr, "/proc/iomem: error %d: %s\n",
>> +            errno, strerror(errno));
>> +        return -errno;
>> +    }
>> +
>> +    while (fgets(line, sizeof(line), fp) != 0) {
>> +        if (strstr(line, system_ram_str)) {
>> +            char *dash, *end_ptr;
>> +
>> +            /* Given a line like this:
>> +             * d0400000-10ffaffff : System RAM
>> +             * replace the "-" with a space
>> +             */
>> +            dash = strstr(line, "-");
>> +            dash[0] = 0x20;
>> +
>> +            start_addr[range_count] = strtoull(line, &end_ptr, 16);
>> +            end_addr[range_count] = strtoull(end_ptr, NULL, 16);
>> +            range_count++;
>> +        }
>> +    }
>> +
>> +    fclose(fp);
>> +
>> +    DEBUG_PRINT_L1("RAM Ranges\n");
>> +    for (i = 0; i < range_count; i++)
>> +        DEBUG_PRINT_L1("\trange %d: 0x%llx\t- 0x%llx\n",
>> +                   i, start_addr[i], end_addr[i]);
>> +
>> +    if (range_count == 0) {
>> +        fprintf(stderr, "No valid address ranges found. Error.\n");
>> +        return -1;
>> +    }
>> +
>> +    return 0;
>> +}
>> +
>> +static int read_adi(int fd, unsigned char *buf, int buf_sz)
>> +{
>> +    int ret, bytes_read = 0;
>> +    long start, end, elapsed_time = 0;
>> +
>> +    do {
>> +        RDTICK(start);
>> +        ret = read(fd, buf + bytes_read, buf_sz - bytes_read);
>> +        RDTICK(end);
>> +        if (ret < 0)
>> +            return -errno;
>> +
>> +        elapsed_time += end - start;
>> +        update_stats(&read_stats, elapsed_time, buf_sz);
>> +        bytes_read += ret;
>> +
>> +    } while (bytes_read < buf_sz);
>> +
>> +    DEBUG_PRINT_T("\tread elapsed timed = %ld\n", elapsed_time);
>> +    DEBUG_PRINT_L3("\tRead  %d bytes\n", bytes_read);
>> +
>> +    return bytes_read;
>> +}
>> +
>> +static int pread_adi(int fd, unsigned char *buf,
>> +             int buf_sz, unsigned long offset)
>> +{
>> +    int ret, i, bytes_read = 0;
>> +    unsigned long cur_offset;
>> +    long start, end, elapsed_time = 0;
>> +
>> +    cur_offset = offset;
>> +    do {
>> +        RDTICK(start);
>> +        ret = pread(fd, buf + bytes_read, buf_sz - bytes_read,
>> +                cur_offset);
>> +        RDTICK(end);
>> +        if (ret < 0)
>> +            return -errno;
>> +
>> +        elapsed_time += end - start;
>> +        update_stats(&pread_stats, elapsed_time, buf_sz);
>> +        bytes_read += ret;
>> +        cur_offset += ret;
>> +
>> +    } while (bytes_read < buf_sz);
>> +
>> +    DEBUG_PRINT_T("\tpread elapsed timed = %ld\n", elapsed_time);
>> +    DEBUG_PRINT_L3("\tRead  %d bytes starting at offset 0x%lx\n",
>> +               bytes_read, offset);
>> +    for (i = 0; i < bytes_read; i++)
>> +        DEBUG_PRINT_L4("\t\t0x%lx\t%d\n", offset + i, buf[i]);
>> +
>> +    return bytes_read;
>> +}
>> +
>> +static int write_adi(int fd, const unsigned char * const buf, int 
>> buf_sz)
>> +{
>> +    int ret, bytes_written = 0;
>> +    long start, end, elapsed_time = 0;
>> +
>> +    do {
>> +        RDTICK(start);
>> +        ret = write(fd, buf + bytes_written, buf_sz - bytes_written);
>> +        RDTICK(end);
>> +        if (ret < 0)
>> +            return -errno;
>> +
>> +        elapsed_time += (end - start);
>> +        update_stats(&write_stats, elapsed_time, buf_sz);
>> +        bytes_written += ret;
>> +    } while (bytes_written < buf_sz);
>> +
>> +    DEBUG_PRINT_T("\twrite elapsed timed = %ld\n", elapsed_time);
>> +    DEBUG_PRINT_L3("\tWrote %d of %d bytes\n", bytes_written, buf_sz);
>> +
>> +    return bytes_written;
>> +}
>> +
>> +static int pwrite_adi(int fd, const unsigned char * const buf,
>> +              int buf_sz, unsigned long offset)
>> +{
>> +    int ret, bytes_written = 0;
>> +    unsigned long cur_offset;
>> +    long start, end, elapsed_time = 0;
>> +
>> +    cur_offset = offset;
>> +
>> +    do {
>> +        RDTICK(start);
>> +        ret = pwrite(fd, buf + bytes_written,
>> +                 buf_sz - bytes_written, cur_offset);
>> +        RDTICK(end);
>> +        if (ret < 0) {
>> +            fprintf(stderr, "pwrite(): error %d: %s\n",
>> +                errno, strerror(errno));
>> +            return -errno;
>> +        }
>> +
>> +        elapsed_time += (end - start);
>> +        update_stats(&pwrite_stats, elapsed_time, buf_sz);
>> +        bytes_written += ret;
>> +        cur_offset += ret;
>> +
>> +    } while (bytes_written < buf_sz);
>> +
>> +    DEBUG_PRINT_T("\tpwrite elapsed timed = %ld\n", elapsed_time);
>> +    DEBUG_PRINT_L3("\tWrote %d of %d bytes starting at address 
>> 0x%lx\n",
>> +               bytes_written, buf_sz, offset);
>> +
>> +    return bytes_written;
>> +}
>> +
>> +static off_t seek_adi(int fd, off_t offset, int whence)
>> +{
>> +    long start, end;
>> +    off_t ret;
>> +
>> +    RDTICK(start);
>> +    ret = lseek(fd, offset, whence);
>> +    RDTICK(end);
>> +    DEBUG_PRINT_L2("\tlseek ret = 0x%llx\n", ret);
>> +    if (ret < 0)
>> +        goto out;
>> +
>> +    DEBUG_PRINT_T("\tlseek elapsed timed = %ld\n", end - start);
>> +    update_stats(&seek_stats, end - start, 0);
>> +
>> +out:
>> +    (void)lseek(fd, 0, SEEK_END);
>> +    return ret;
>> +}
>> +
>> +static int test0_prpw_aligned_1byte(int fd)
>> +{
>> +    /* somewhat arbitrarily chosen address */
>> +    unsigned long paddr =
>> +        (end_addr[range_count - 1] - 0x1000) & ~(ADI_BLKSZ - 1);
>> +    unsigned char version[1], expected_version;
>> +    loff_t offset;
>> +    int ret;
>> +
>> +    version[0] = random_version();
>> +    expected_version = version[0];
>> +
>> +    offset = paddr / ADI_BLKSZ;
>> +
>> +    ret = pwrite_adi(fd, version, sizeof(version), offset);
>> +    if (ret != sizeof(version))
>> +        TEST_STEP_FAILURE(ret);
>> +
>> +    ret = pread_adi(fd, version, sizeof(version), offset);
>> +    if (ret != sizeof(version))
>> +        TEST_STEP_FAILURE(ret);
>> +
>> +    if (expected_version != version[0]) {
>> +        DEBUG_PRINT_L2("\tExpected version %d but read version %d\n",
>> +                   expected_version, version[0]);
>> +        TEST_STEP_FAILURE(-expected_version);
>> +    }
>> +
>> +    ret = 0;
>> +out:
>> +    RETURN_FROM_TEST(ret);
>> +}
>> +
>> +#define TEST1_VERSION_SZ    4096
>> +static int test1_prpw_aligned_4096bytes(int fd)
>> +{
>> +    /* somewhat arbitrarily chosen address */
>> +    unsigned long paddr =
>> +        (end_addr[range_count - 1] - 0x6000) & ~(ADI_BLKSZ - 1);
>> +    unsigned char version[TEST1_VERSION_SZ],
>> +        expected_version[TEST1_VERSION_SZ];
>> +    loff_t offset;
>> +    int ret, i;
>> +
>> +    for (i = 0; i < TEST1_VERSION_SZ; i++) {
>> +        version[i] = random_version();
>> +        expected_version[i] = version[i];
>> +    }
>> +
>> +    offset = paddr / ADI_BLKSZ;
>> +
>> +    ret = pwrite_adi(fd, version, sizeof(version), offset);
>> +    if (ret != sizeof(version))
>> +        TEST_STEP_FAILURE(ret);
>> +
>> +    ret = pread_adi(fd, version, sizeof(version), offset);
>> +    if (ret != sizeof(version))
>> +        TEST_STEP_FAILURE(ret);
>> +
>> +    for (i = 0; i < TEST1_VERSION_SZ; i++) {
>> +        if (expected_version[i] != version[i]) {
>> +            DEBUG_PRINT_L2(
>> +                "\tExpected version %d but read version %d\n",
>> +                expected_version, version[0]);
>> +            TEST_STEP_FAILURE(-expected_version[i]);
>> +        }
>> +    }
>> +
>> +    ret = 0;
>> +out:
>> +    RETURN_FROM_TEST(ret);
>> +}
>> +
>> +#define TEST2_VERSION_SZ    10327
>> +static int test2_prpw_aligned_10327bytes(int fd)
>> +{
>> +    /* somewhat arbitrarily chosen address */
>> +    unsigned long paddr =
>> +        (start_addr[0] + 0x6000) & ~(ADI_BLKSZ - 1);
>> +    unsigned char version[TEST2_VERSION_SZ],
>> +        expected_version[TEST2_VERSION_SZ];
>> +    loff_t offset;
>> +    int ret, i;
>> +
>> +    for (i = 0; i < TEST2_VERSION_SZ; i++) {
>> +        version[i] = random_version();
>> +        expected_version[i] = version[i];
>> +    }
>> +
>> +    offset = paddr / ADI_BLKSZ;
>> +
>> +    ret = pwrite_adi(fd, version, sizeof(version), offset);
>> +    if (ret != sizeof(version))
>> +        TEST_STEP_FAILURE(ret);
>> +
>> +    ret = pread_adi(fd, version, sizeof(version), offset);
>> +    if (ret != sizeof(version))
>> +        TEST_STEP_FAILURE(ret);
>> +
>> +    for (i = 0; i < TEST2_VERSION_SZ; i++) {
>> +        if (expected_version[i] != version[i]) {
>> +            DEBUG_PRINT_L2(
>> +                "\tExpected version %d but read version %d\n",
>> +                expected_version, version[0]);
>> +            TEST_STEP_FAILURE(-expected_version[i]);
>> +        }
>> +    }
>> +
>> +    ret = 0;
>> +out:
>> +    RETURN_FROM_TEST(ret);
>> +}
>> +
>> +#define TEST3_VERSION_SZ    12541
>> +static int test3_prpw_unaligned_12541bytes(int fd)
>> +{
>> +    /* somewhat arbitrarily chosen address */
>> +    unsigned long paddr =
>> +        ((start_addr[0] + 0xC000) & ~(ADI_BLKSZ - 1)) + 17;
>> +    unsigned char version[TEST3_VERSION_SZ],
>> +        expected_version[TEST3_VERSION_SZ];
>> +    loff_t offset;
>> +    int ret, i;
>> +
>> +    for (i = 0; i < TEST3_VERSION_SZ; i++) {
>> +        version[i] = random_version();
>> +        expected_version[i] = version[i];
>> +    }
>> +
>> +    offset = paddr / ADI_BLKSZ;
>> +
>> +    ret = pwrite_adi(fd, version, sizeof(version), offset);
>> +    if (ret != sizeof(version))
>> +        TEST_STEP_FAILURE(ret);
>> +
>> +    ret = pread_adi(fd, version, sizeof(version), offset);
>> +    if (ret != sizeof(version))
>> +        TEST_STEP_FAILURE(ret);
>> +
>> +    for (i = 0; i < TEST3_VERSION_SZ; i++) {
>> +        if (expected_version[i] != version[i]) {
>> +            DEBUG_PRINT_L2(
>> +                "\tExpected version %d but read version %d\n",
>> +                expected_version, version[0]);
>> +            TEST_STEP_FAILURE(-expected_version[i]);
>> +        }
>> +    }
>> +
>> +    ret = 0;
>> +out:
>> +    RETURN_FROM_TEST(ret);
>> +}
>> +
>> +static int test4_lseek(int fd)
>> +{
>> +#define    OFFSET_ADD    (0x100)
>> +#define OFFSET_SUBTRACT    (0xFFFFFFF000000000)
>> +
>> +    off_t offset_out, offset_in;
>> +    int ret;
>> +
>> +
>> +    offset_in = 0x123456789abcdef0;
>> +    offset_out = seek_adi(fd, offset_in, SEEK_SET);
>> +    if (offset_out != offset_in) {
>> +        ret = -1;
>> +        TEST_STEP_FAILURE(ret);
>> +    }
>> +
>> +    /* seek to the current offset.  this should return EINVAL */
>> +    offset_out = seek_adi(fd, offset_in, SEEK_SET);
>> +    if (offset_out < 0 && errno == EINVAL)
>> +        DEBUG_PRINT_L2(
>> +            "\tSEEK_SET failed as designed. Not an error\n");
>> +    else {
>> +        ret = -2;
>> +        TEST_STEP_FAILURE(ret);
>> +    }
>> +
>> +    offset_out = seek_adi(fd, 0, SEEK_CUR);
>> +    if (offset_out != offset_in) {
>> +        ret = -3;
>> +        TEST_STEP_FAILURE(ret);
>> +    }
>> +
>> +    offset_out = seek_adi(fd, OFFSET_ADD, SEEK_CUR);
>> +    if (offset_out != (offset_in + OFFSET_ADD)) {
>> +        ret = -4;
>> +        TEST_STEP_FAILURE(ret);
>> +    }
>> +
>> +    offset_out = seek_adi(fd, OFFSET_SUBTRACT, SEEK_CUR);
>> +    if (offset_out != (offset_in + OFFSET_ADD + OFFSET_SUBTRACT)) {
>> +        ret = -5;
>> +        TEST_STEP_FAILURE(ret);
>> +    }
>> +
>> +    ret = 0;
>> +out:
>> +    RETURN_FROM_TEST(ret);
>> +}
>> +
>> +static int test5_rw_aligned_1byte(int fd)
>> +{
>> +    /* somewhat arbitrarily chosen address */
>> +    unsigned long paddr =
>> +        (end_addr[range_count - 1] - 0xF000) & ~(ADI_BLKSZ - 1);
>> +    unsigned char version, expected_version;
>> +    loff_t offset;
>> +    off_t oret;
>> +    int ret;
>> +
>> +    offset = paddr / ADI_BLKSZ;
>> +    version = expected_version = random_version();
>> +
>> +    oret = seek_adi(fd, offset, SEEK_SET);
>> +    if (oret != offset) {
>> +        ret = -1;
>> +        TEST_STEP_FAILURE(ret);
>> +    }
>> +
>> +    ret = write_adi(fd, &version, sizeof(version));
>> +    if (ret != sizeof(version))
>> +        TEST_STEP_FAILURE(ret);
>> +
>> +    oret = seek_adi(fd, offset, SEEK_SET);
>> +    if (oret != offset) {
>> +        ret = -1;
>> +        TEST_STEP_FAILURE(ret);
>> +    }
>> +
>> +    ret = read_adi(fd, &version, sizeof(version));
>> +    if (ret != sizeof(version))
>> +        TEST_STEP_FAILURE(ret);
>> +
>> +    if (expected_version != version) {
>> +        DEBUG_PRINT_L2("\tExpected version %d but read version %d\n",
>> +                   expected_version, version);
>> +        TEST_STEP_FAILURE(-expected_version);
>> +    }
>> +
>> +    ret = 0;
>> +out:
>> +    RETURN_FROM_TEST(ret);
>> +}
>> +
>> +#define TEST6_VERSION_SZ        9434
>> +static int test6_rw_aligned_9434bytes(int fd)
>> +{
>> +    /* somewhat arbitrarily chosen address */
>> +    unsigned long paddr =
>> +        (end_addr[range_count - 1] - 0x5F000) & ~(ADI_BLKSZ - 1);
>> +    unsigned char version[TEST6_VERSION_SZ],
>> +              expected_version[TEST6_VERSION_SZ];
>> +    loff_t offset;
>> +    off_t oret;
>> +    int ret, i;
>> +
>> +    offset = paddr / ADI_BLKSZ;
>> +    for (i = 0; i < TEST6_VERSION_SZ; i++)
>> +        version[i] = expected_version[i] = random_version();
>> +
>> +    oret = seek_adi(fd, offset, SEEK_SET);
>> +    if (oret != offset) {
>> +        ret = -1;
>> +        TEST_STEP_FAILURE(ret);
>> +    }
>> +
>> +    ret = write_adi(fd, version, sizeof(version));
>> +    if (ret != sizeof(version))
>> +        TEST_STEP_FAILURE(ret);
>> +
>> +    memset(version, 0, TEST6_VERSION_SZ);
>> +
>> +    oret = seek_adi(fd, offset, SEEK_SET);
>> +    if (oret != offset) {
>> +        ret = -1;
>> +        TEST_STEP_FAILURE(ret);
>> +    }
>> +
>> +    ret = read_adi(fd, version, sizeof(version));
>> +    if (ret != sizeof(version))
>> +        TEST_STEP_FAILURE(ret);
>> +
>> +    for (i = 0; i < TEST6_VERSION_SZ; i++) {
>> +        if (expected_version[i] != version[i]) {
>> +            DEBUG_PRINT_L2(
>> +                "\tExpected version %d but read version %d\n",
>> +                expected_version[i], version[i]);
>> +            TEST_STEP_FAILURE(-expected_version[i]);
>> +        }
>> +    }
>> +
>> +    ret = 0;
>> +out:
>> +    RETURN_FROM_TEST(ret);
>> +}
>> +
>> +#define TEST7_VERSION_SZ        14963
>> +static int test7_rw_aligned_14963bytes(int fd)
>> +{
>> +    /* somewhat arbitrarily chosen address */
>> +    unsigned long paddr =
>> +      ((start_addr[range_count - 1] + 0xF000) & ~(ADI_BLKSZ - 1)) + 39;
>> +    unsigned char version[TEST7_VERSION_SZ],
>> +              expected_version[TEST7_VERSION_SZ];
>> +    loff_t offset;
>> +    off_t oret;
>> +    int ret, i;
>> +
>> +    offset = paddr / ADI_BLKSZ;
>> +    for (i = 0; i < TEST7_VERSION_SZ; i++) {
>> +        version[i] = random_version();
>> +        expected_version[i] = version[i];
>> +    }
>> +
>> +    oret = seek_adi(fd, offset, SEEK_SET);
>> +    if (oret != offset) {
>> +        ret = -1;
>> +        TEST_STEP_FAILURE(ret);
>> +    }
>> +
>> +    ret = write_adi(fd, version, sizeof(version));
>> +    if (ret != sizeof(version))
>> +        TEST_STEP_FAILURE(ret);
>> +
>> +    memset(version, 0, TEST7_VERSION_SZ);
>> +
>> +    oret = seek_adi(fd, offset, SEEK_SET);
>> +    if (oret != offset) {
>> +        ret = -1;
>> +        TEST_STEP_FAILURE(ret);
>> +    }
>> +
>> +    ret = read_adi(fd, version, sizeof(version));
>> +    if (ret != sizeof(version))
>> +        TEST_STEP_FAILURE(ret);
>> +
>> +    for (i = 0; i < TEST7_VERSION_SZ; i++) {
>> +        if (expected_version[i] != version[i]) {
>> +            DEBUG_PRINT_L2(
>> +                "\tExpected version %d but read version %d\n",
>> +                expected_version[i], version[i]);
>> +            TEST_STEP_FAILURE(-expected_version[i]);
>> +        }
>> +
>> +        paddr += ADI_BLKSZ;
>> +    }
>> +
>> +    ret = 0;
>> +out:
>> +    RETURN_FROM_TEST(ret);
>> +}
>> +
>> +static int (*tests[])(int fd) = {
>> +    test0_prpw_aligned_1byte,
>> +    test1_prpw_aligned_4096bytes,
>> +    test2_prpw_aligned_10327bytes,
>> +    test3_prpw_unaligned_12541bytes,
>> +    test4_lseek,
>> +    test5_rw_aligned_1byte,
>> +    test6_rw_aligned_9434bytes,
>> +    test7_rw_aligned_14963bytes,
>> +};
>> +#define TEST_COUNT    ARRAY_SIZE(tests)
>> +
>> +int main(int argc, char *argv[])
>> +{
>> +    int fd, ret, test;
>> +
>> +    ret = build_memory_map();
>> +    if (ret < 0)
>> +        return ret;
>> +
>> +    fd = open("/dev/adi", O_RDWR);
>> +    if (fd < 0) {
>> +        fprintf(stderr, "open: error %d: %s\n",
>> +            errno, strerror(errno));
>> +        return -errno;
>> +    }
>> +
>> +    for (test = 0; test < TEST_COUNT; test++) {
>> +        DEBUG_PRINT_L1("Running test #%d\n", test);
>> +
>> +        ret = (*tests[test])(fd);
>> +        if (ret != 0)
>> +            ksft_test_result_fail("Test #%d failed: error %d\n",
>> +                          test, ret);
>> +        else
>> +            ksft_test_result_pass("Test #%d passed\n", test);
>> +    }
>> +
>> +    print_stats();
>> +    close(fd);
>> +
>> +    if (ksft_get_fail_cnt() > 0)
>> +        ksft_exit_fail();
>> +    else
>> +        ksft_exit_pass();
>> +
>> +    /* it's impossible to get here, but the compiler throws a warning
>> +     * about control reaching the end of non-void function. bah.
>> +     */
>> +    return 0;
>> +}
>> diff --git a/tools/testing/selftests/sparc64/drivers/drivers_test.sh 
>> b/tools/testing/selftests/sparc64/drivers/drivers_test.sh
>> new file mode 100755
>> index 000000000000..6d08273b7532
>> --- /dev/null
>> +++ b/tools/testing/selftests/sparc64/drivers/drivers_test.sh
>> @@ -0,0 +1,30 @@
>> +#!/bin/sh
>> +# SPDX-License-Identifier: GPL-2.0
>> +
>> +SRC_TREE=../../../../
>> +
>> +test_run()
>> +{
>> +    if [ -f ${SRC_TREE}/drivers/char/adi.ko ]; then
>> +        insmod ${SRC_TREE}/drivers/char/adi.ko 2> /dev/null
>> +        if [ $? -ne 0 ]; then
>> +            rc=1
>> +        fi
>> +    else
>> +        # Use modprobe dry run to check for missing adi module
>> +        if ! /sbin/modprobe -q -n adi; then
>> +            echo "adi: [SKIP]"
>> +        elif /sbin/modprobe -q adi; then
>> +            echo "adi: ok"
>> +        else
>> +            echo "adi: [FAIL]"
>> +            rc=1
>> +        fi
>> +    fi
>> +    ./adi-test
>> +    rmmod adi 2> /dev/null
>> +}
>> +
>> +rc=0
>> +test_run
>> +exit $rc
>> diff --git a/tools/testing/selftests/sparc64/run.sh 
>> b/tools/testing/selftests/sparc64/run.sh
>> new file mode 100755
>> index 000000000000..38ad61f9328e
>> --- /dev/null
>> +++ b/tools/testing/selftests/sparc64/run.sh
>> @@ -0,0 +1,3 @@
>> +#!/bin/sh
>> +
>> +(cd drivers; ./drivers_test.sh)
>

Powered by blists - more mailing lists