linux-kernel - [PATCH 4.9 83/95] powerpc/eeh: Fix enabling bridge MMIO windows

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Sun, 22 Apr 2018 15:53:52 +0200
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org,
        Pridhiviraj Paidipeddi <ppaidipe@...ux.vnet.ibm.com>,
        Michael Neuling <mikey@...ling.org>,
        Russell Currey <ruscur@...sell.cc>,
        Michael Ellerman <mpe@...erman.id.au>
Subject: [PATCH 4.9 83/95] powerpc/eeh: Fix enabling bridge MMIO windows

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Neuling <mikey@...ling.org>

commit 13a83eac373c49c0a081cbcd137e79210fe78acd upstream.

On boot we save the configuration space of PCIe bridges. We do this so
when we get an EEH event and everything gets reset that we can restore
them.

Unfortunately we save this state before we've enabled the MMIO space
on the bridges. Hence if we have to reset the bridge when we come back
MMIO is not enabled and we end up taking an PE freeze when the driver
starts accessing again.

This patch forces the memory/MMIO and bus mastering on when restoring
bridges on EEH. Ideally we'd do this correctly by saving the
configuration space writes later, but that will have to come later in
a larger EEH rewrite. For now we have this simple fix.

The original bug can be triggered on a boston machine by doing:
  echo 0x8000000000000000 > /sys/kernel/debug/powerpc/PCI0001/err_injct_outbound
On boston, this PHB has a PCIe switch on it.  Without this patch,
you'll see two EEH events, 1 expected and 1 the failure we are fixing
here. The second EEH event causes the anything under the PHB to
disappear (i.e. the i40e eth).

With this patch, only 1 EEH event occurs and devices properly recover.

Fixes: 652defed4875 ("powerpc/eeh: Check PCIe link after reset")
Cc: stable@...r.kernel.org # v3.11+
Reported-by: Pridhiviraj Paidipeddi <ppaidipe@...ux.vnet.ibm.com>
Signed-off-by: Michael Neuling <mikey@...ling.org>
Acked-by: Russell Currey <ruscur@...sell.cc>
Signed-off-by: Michael Ellerman <mpe@...erman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>

---
 arch/powerpc/kernel/eeh_pe.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/arch/powerpc/kernel/eeh_pe.c
+++ b/arch/powerpc/kernel/eeh_pe.c
@@ -795,7 +795,8 @@ static void eeh_restore_bridge_bars(stru
 	eeh_ops->write_config(pdn, 15*4, 4, edev->config_space[15]);

 	/* PCI Command: 0x4 */
-	eeh_ops->write_config(pdn, PCI_COMMAND, 4, edev->config_space[1]);
+	eeh_ops->write_config(pdn, PCI_COMMAND, 4, edev->config_space[1] |
+			      PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);

 	/* Check the PCIe link is ready */
 	eeh_bridge_check_link(edev);