[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <E1fAfpo-0004D5-5n@debutante>
Date: Mon, 23 Apr 2018 19:05:04 +0100
From: Mark Brown <broonie@...nel.org>
To: Geert Uytterhoeven <geert+renesas@...der.be>
Cc: Lee Jones <lee.jones@...aro.org>, Mark Brown <broonie@...nel.org>,
Marek Vasut <marek.vasut+renesas@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Simon Horman <horms@...ge.net.au>,
Magnus Damm <magnus.damm@...il.com>,
Lee Jones <lee.jones@...aro.org>,
linux-renesas-soc@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-pm@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Applied "mfd: bd9571mwv: Allow DDR Backup Power register access" to the regulator tree
The patch
mfd: bd9571mwv: Allow DDR Backup Power register access
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 7b569bcb2a2f985fe2d1407aed705882af30cb77 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert+renesas@...der.be>
Date: Wed, 18 Apr 2018 15:18:03 +0200
Subject: [PATCH] mfd: bd9571mwv: Allow DDR Backup Power register access
Enable read/write access to the BD9571MWV_BKUP_MODE_CNT register, which
is amongst others used to configure DDR Backup Power.
Signed-off-by: Geert Uytterhoeven <geert+renesas@...der.be>
Acked-by: Lee Jones <lee.jones@...aro.org>
Signed-off-by: Mark Brown <broonie@...nel.org>
---
drivers/mfd/bd9571mwv.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/mfd/bd9571mwv.c b/drivers/mfd/bd9571mwv.c
index 64e088dfe7b0..503979c81dae 100644
--- a/drivers/mfd/bd9571mwv.c
+++ b/drivers/mfd/bd9571mwv.c
@@ -29,6 +29,7 @@ static const struct mfd_cell bd9571mwv_cells[] = {
static const struct regmap_range bd9571mwv_readable_yes_ranges[] = {
regmap_reg_range(BD9571MWV_VENDOR_CODE, BD9571MWV_PRODUCT_REVISION),
+ regmap_reg_range(BD9571MWV_BKUP_MODE_CNT, BD9571MWV_BKUP_MODE_CNT),
regmap_reg_range(BD9571MWV_AVS_SET_MONI, BD9571MWV_AVS_DVFS_VID(3)),
regmap_reg_range(BD9571MWV_VD18_VID, BD9571MWV_VD33_VID),
regmap_reg_range(BD9571MWV_DVFS_VINIT, BD9571MWV_DVFS_VINIT),
@@ -44,6 +45,7 @@ static const struct regmap_access_table bd9571mwv_readable_table = {
};
static const struct regmap_range bd9571mwv_writable_yes_ranges[] = {
+ regmap_reg_range(BD9571MWV_BKUP_MODE_CNT, BD9571MWV_BKUP_MODE_CNT),
regmap_reg_range(BD9571MWV_AVS_VD09_VID(0), BD9571MWV_AVS_VD09_VID(3)),
regmap_reg_range(BD9571MWV_DVFS_SETVID, BD9571MWV_DVFS_SETVID),
regmap_reg_range(BD9571MWV_GPIO_DIR, BD9571MWV_GPIO_OUT),
--
2.17.0
Powered by blists - more mailing lists