[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180423145729.14368-1-yixun.lan@amlogic.com>
Date: Mon, 23 Apr 2018 14:57:29 +0000
From: Yixun Lan <yixun.lan@...ogic.com>
To: Kevin Hilman <khilman@...libre.com>
CC: Yixun Lan <yixun.lan@...ogic.com>, Carlo Caione <carlo@...one.org>,
Jerome Brunet <jbrunet@...libre.com>,
<linux-amlogic@...ts.infradead.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>
Subject: [PATCH] ARM64: dts: meson-axg: enable AP6255 wifi module
The Meson-AXG S400 board is shipped with AP6255 wifi module,
which is actually using the brcmfmac 43455 driver.
Signed-off-by: Yixun Lan <yixun.lan@...ogic.com>
---
.../arm64/boot/dts/amlogic/meson-axg-s400.dts | 44 ++++++++++++++++++-
1 file changed, 43 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index f67d4e47e641..b3e1bdca32bb 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -51,7 +51,16 @@
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
- reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>;
+ clocks = <&wifi32k>;
+ clock-names = "ext_clock";
+ };
+
+ wifi32k: wifi32k {
+ compatible = "pwm-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */
};
};
@@ -86,6 +95,12 @@
pinctrl-names = "default";
};
+&pwm_ab {
+ status = "okay";
+ pinctrl-0 = <&pwm_a_x20_pins>;
+ pinctrl-names = "default";
+};
+
/* emmc storage */
&sd_emmc_c {
status = "okay";
@@ -105,3 +120,30 @@
vmmc-supply = <&vcc_3v3>;
vqmmc-supply = <&vddio_boot>;
};
+
+/* wifi module */
+&sd_emmc_b {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pinctrl-0 = <&sdio_pins>;
+ pinctrl-1 = <&sdio_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <100000000>;
+ non-removable;
+ disable-wp;
+
+ mmc-pwrseq = <&sdio_pwrseq>;
+
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ };
+};
--
2.17.0
Powered by blists - more mailing lists