| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <2b0ba677-921c-c6e0-00d2-ac5bdefd2d6b@codeaurora.org>
Date: Mon, 23 Apr 2018 22:20:22 +0530
From: Taniya Das <tdas@...eaurora.org>
To: Stephen Boyd <sboyd@...nel.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...eaurora.org>
Cc: Andy Gross <andy.gross@...aro.org>,
David Brown <david.brown@...aro.org>,
Rajendra Nayak <rnayak@...eaurora.org>,
Odelu Kukatla <okukatla@...eaurora.org>,
Amit Nischal <anischal@...eaurora.org>,
linux-arm-msm@...r.kernel.org, linux-soc@...r.kernel.org,
linux-clk@...r.kernel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, David Collins <collinsd@...eaurora.org>
Subject: Re: [PATCH v3 2/2] clk: qcom: clk-rpmh: Add QCOM RPMh clock driver
Thanks Stephen for the review comments.
On 4/16/2018 11:08 PM, Stephen Boyd wrote:
> Quoting Taniya Das (2018-04-13 19:36:41)
>> Add the RPMh clock driver to control the RPMh managed clock resources on
>> some of the Qualcomm Technologies, Inc. SoCs.
>>
>> Signed-off-by: David Collins <collinsd@...eaurora.org>
>> Signed-off-by: Amit Nischal <anischal@...eaurora.org>
>
> Your signoff chain is very confused. The first signoff should match the
> "From:" header but that doesn't seem to be the case here. And the sender
> should be the last in the chain.
>
>> ---
>> drivers/clk/qcom/Kconfig | 9 ++
>> drivers/clk/qcom/Makefile | 1 +
>> drivers/clk/qcom/clk-rpmh.c | 367 ++++++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 377 insertions(+)
>> create mode 100644 drivers/clk/qcom/clk-rpmh.c
>>
>> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
>> index fbf4532..63c3372 100644
>> --- a/drivers/clk/qcom/Kconfig
>> +++ b/drivers/clk/qcom/Kconfig
>> @@ -112,6 +112,15 @@ config IPQ_GCC_8074
>> i2c, USB, SD/eMMC, etc. Select this for the root clock
>> of ipq8074.
>>
>> +config QCOM_CLK_RPMH
>> + tristate "RPMh Clock Driver"
>> + depends on COMMON_CLK_QCOM && QCOM_RPMH
>> + help
>> + RPMh manages shared resources on some Qualcomm Technologies, Inc.
>> + SoCs. It accepts requests from other hardware subsystems via RSC.
>> + Say Y if you want to support the clocks exposed by RPMh on
>> + platforms such as sdm845.
>
> Capitalize sdm?
>
>> +
>
Would use SDM845.
> Can this Kconfig be put into alphabetical order in this file?
>
Would place it with the QCOM_* configs in this file.
>> config MSM_GCC_8660
>> tristate "MSM8660 Global Clock Controller"
>> depends on COMMON_CLK_QCOM
>> diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
>> index 230332c..b2b5babf 100644
>> --- a/drivers/clk/qcom/Makefile
>> +++ b/drivers/clk/qcom/Makefile
>> @@ -36,5 +36,6 @@ obj-$(CONFIG_MSM_MMCC_8996) += mmcc-msm8996.o
>> obj-$(CONFIG_QCOM_A53PLL) += a53-pll.o
>> obj-$(CONFIG_QCOM_CLK_APCS_MSM8916) += apcs-msm8916.o
>> obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o
>> +obj-$(CONFIG_QCOM_CLK_RPMH) += clk-rpmh.o
>> obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
>> obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o
>> diff --git a/drivers/clk/qcom/clk-rpmh.c b/drivers/clk/qcom/clk-rpmh.c
>> new file mode 100644
>> index 0000000..fa61284
>> --- /dev/null
>> +++ b/drivers/clk/qcom/clk-rpmh.c
>> @@ -0,0 +1,367 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (c) 2018, The Linux Foundation. All rights reserved.
>> + */
>> +
>> +#include <linux/clk.h>
>
> Is this include used?
>
Would remove this include.
>> +#include <linux/clk-provider.h>
>> +#include <linux/err.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_device.h>
>> +#include <linux/platform_device.h>
>> +#include <soc/qcom/cmd-db.h>
>> +#include <soc/qcom/rpmh.h>
>> +
>> +#include <dt-bindings/clock/qcom,rpmh.h>
>> +
>> +#define CLK_RPMH_ARC_EN_OFFSET 0
>> +#define CLK_RPMH_VRM_EN_OFFSET 4
>> +#define CLK_RPMH_APPS_RSC_AO_STATE_MASK (BIT(RPMH_WAKE_ONLY_STATE) | \
>> + BIT(RPMH_ACTIVE_ONLY_STATE))
>> +#define CLK_RPMH_APPS_RSC_STATE_MASK (BIT(RPMH_WAKE_ONLY_STATE) | \
>> + BIT(RPMH_ACTIVE_ONLY_STATE) | \
>> + BIT(RPMH_SLEEP_STATE))
>
> Is there a reason these aren't inlined into the one place they're used?
>
Would clean the above.
>> +struct clk_rpmh {
>> + struct clk_hw hw;
>> + const char *res_name;
>> + u32 res_addr;
>> + u32 res_en_offset;
>
> Why do we store both res_addr and res_en_offset? Can't we just store
> res_en_offset and then use that all the time? I don't see a user of
> res_addr anywhere.
>
The res_addr would be the address for the resource returned by the
cmd_db_read_addr. And the res_en_offset would be the offsets of ARC_EN
or VRM_EN.
>> + u32 res_on_val;
>> + u32 res_off_val;
>
> Is this used?
Yes the above are used.
>
>> + u32 state;
>> + u32 aggr_state;
>> + u32 last_sent_aggr_state;
>> + u32 valid_state_mask;
>> + struct rpmh_client *rpmh_client;
>> + struct device *dev;
>> + struct clk_rpmh *peer;
>> + unsigned long rate;
>> +};
>
> Can you add some kernel-doc on these structure members?
>
Sure will add the same.
>> +
>> +struct rpmh_cc {
>> + struct clk_onecell_data data;
>> + struct clk *clks[];
>> +};
>
> Hopefully this structure isn't needed.
>
Yes, would remove the above.
>> +
>> +struct clk_rpmh_desc {
>> + struct clk_hw **clks;
>> + size_t num_clks;
>> +};
>> +
> [...]
>> +
>> +static inline bool has_state_changed(struct clk_rpmh *c, u32 state)
>> +{
>> + return ((c->last_sent_aggr_state & BIT(state))
>> + != (c->aggr_state & BIT(state)));
>
> Too many parenthesis here.
>
Would clean it up.
>> +}
>> +
>> +static int clk_rpmh_send_aggregate_command(struct clk_rpmh *c)
>> +{
>> + struct tcs_cmd cmd = { 0 };
>> + u32 cmd_state, on_val;
>> + enum rpmh_state state = RPMH_SLEEP_STATE;
>> + int ret = 0;
>> +
>> + cmd.addr = c->res_addr + c->res_en_offset;
>> + cmd_state = c->aggr_state;
>> + on_val = c->res_on_val;
>> +
>> + for (; state <= RPMH_ACTIVE_ONLY_STATE; state++) {
>> + if (has_state_changed(c, state)) {
>> + cmd.data = (cmd_state & BIT(state)) ? on_val : 0;
>> + ret = rpmh_write_async(c->rpmh_client, state,
>> + &cmd, 1);
>> + if (ret) {
>> + dev_err(c->dev, "set %s state of %s failed: (%d)\n",
>> + (!state) ? "sleep" :
>> + (state == RPMH_WAKE_ONLY_STATE) ?
>> + "wake" : "active", c->res_name, ret);
>> + return ret;
>> + }
>> + }
>> + }
>> +
>> + c->last_sent_aggr_state = c->aggr_state;
>> + c->peer->last_sent_aggr_state = c->last_sent_aggr_state;
>> +
>> + return 0;
>> +}
>> +
>> +static int clk_rpmh_aggregate_state_send_command(struct clk_rpmh *c,
>> + bool enable)
>> +{
>> + int ret;
>> +
>> + /* Update state and aggregate state values based on enable value. */
>
> Maybe this comment can go above the function itself.
>
Sure would move it above the function.
>> + c->state = enable ? c->valid_state_mask : 0;
>> + c->aggr_state = c->state | c->peer->state;
>> + c->peer->aggr_state = c->aggr_state;
>> +
>> + ret = clk_rpmh_send_aggregate_command(c);
>> + if (ret && enable) {
>> + c->state = 0;
>> + } else if (ret) {
>> + c->state = c->valid_state_mask;
>> + WARN(1, "clk: %s failed to disable\n", c->res_name);
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +static int clk_rpmh_prepare(struct clk_hw *hw)
>> +{
>> + struct clk_rpmh *c = to_clk_rpmh(hw);
>> + int ret = 0;
>> +
>> + mutex_lock(&rpmh_clk_lock);
>> +
>> + if (c->state)
>> + goto out;
>> +
>> + ret = clk_rpmh_aggregate_state_send_command(c, true);
>
> Rewrite this as:
>
> if (!c->state)
> ret = clk_rpmh_aggregate_state_send_command(c, true);
>
> and drop the goto.
>
Would cleanup to remove goto.
>> +out:
>> + mutex_unlock(&rpmh_clk_lock);
>> + return ret;
>> +};
>> +
>> +static void clk_rpmh_unprepare(struct clk_hw *hw)
>> +{
>> + struct clk_rpmh *c = to_clk_rpmh(hw);
>> +
>> + mutex_lock(&rpmh_clk_lock);
>> +
>> + if (!c->state)
>> + goto out;
>> +
>> + clk_rpmh_aggregate_state_send_command(c, false);
>> +out:
>
> Same comment.
>
>> + mutex_unlock(&rpmh_clk_lock);
>> + return;
>> +};
>> +
>> +static unsigned long clk_rpmh_recalc_rate(struct clk_hw *hw,
>> + unsigned long parent_rate)
>> +{
>> + struct clk_rpmh *r = to_clk_rpmh(hw);
>> +
>> + /*
>> + * RPMh clocks have a fixed rate. Return static rate set
>> + * at init time.
>> + */
>> + return r->rate;
>
> The rate should come from the parent. In the case of tcxo it would be
> board_xo clk rate (or maybe some fixed div-2 on the board XO that's also
> defined in DT because the board_xo seems to be two times 19.2 MHz?).
>
There would not be any parent for the RPMH clock, they would be the
parent for other clocks.
The TCXO is 19.2MHz and once we have the RPMH clocks, we would remove
the DT reference for board_xo.
>> +}
>> +
>> +static const struct clk_ops clk_rpmh_ops = {
>> + .prepare = clk_rpmh_prepare,
>> + .unprepare = clk_rpmh_unprepare,
>> + .recalc_rate = clk_rpmh_recalc_rate,
>> +};
>> +
>> +/* Resource name must match resource id present in cmd-db. */
>> +DEFINE_CLK_RPMH_ARC(sdm845, bi_tcxo, bi_tcxo_ao, "xo.lvl", 0x3, 0x0, 19200000);
>> +DEFINE_CLK_RPMH_VRM(sdm845, ln_bb_clk2, ln_bb_clk2_ao, "lnbclka2", 19200000);
>> +DEFINE_CLK_RPMH_VRM(sdm845, ln_bb_clk3, ln_bb_clk3_ao, "lnbclka3", 19200000);
>> +DEFINE_CLK_RPMH_VRM(sdm845, rf_clk1, rf_clk1_ao, "rfclka1", 38400000);
>> +DEFINE_CLK_RPMH_VRM(sdm845, rf_clk2, rf_clk2_ao, "rfclka2", 38400000);
>> +DEFINE_CLK_RPMH_VRM(sdm845, rf_clk3, rf_clk3_ao, "rfclka3", 38400000);
>> +
>> +static struct clk_hw *sdm845_rpmh_clocks[] = {
>> + [RPMH_CXO_CLK] = &sdm845_bi_tcxo.hw,
>> + [RPMH_CXO_CLK_A] = &sdm845_bi_tcxo_ao.hw,
>> + [RPMH_LN_BB_CLK2] = &sdm845_ln_bb_clk2.hw,
>> + [RPMH_LN_BB_CLK2_A] = &sdm845_ln_bb_clk2_ao.hw,
>> + [RPMH_LN_BB_CLK3] = &sdm845_ln_bb_clk3.hw,
>> + [RPMH_LN_BB_CLK3_A] = &sdm845_ln_bb_clk3_ao.hw,
>> + [RPMH_RF_CLK1] = &sdm845_rf_clk1.hw,
>> + [RPMH_RF_CLK1_A] = &sdm845_rf_clk1_ao.hw,
>> + [RPMH_RF_CLK2] = &sdm845_rf_clk2.hw,
>> + [RPMH_RF_CLK2_A] = &sdm845_rf_clk2_ao.hw,
>> + [RPMH_RF_CLK3] = &sdm845_rf_clk3.hw,
>> + [RPMH_RF_CLK3_A] = &sdm845_rf_clk3_ao.hw,
>> +};
>> +
>> +static const struct clk_rpmh_desc clk_rpmh_sdm845 = {
>> + .clks = sdm845_rpmh_clocks,
>> + .num_clks = ARRAY_SIZE(sdm845_rpmh_clocks),
>> +};
>> +
>> +static int clk_rpmh_probe(struct platform_device *pdev)
>> +{
>> + struct clk **clks;
>> + struct clk *clk;
>> + struct rpmh_cc *rcc;
>> + struct clk_onecell_data *data;
>> + struct clk_hw **hw_clks;
>> + struct clk_rpmh *rpmh_clk;
>> + const struct clk_rpmh_desc *desc;
>> + struct rpmh_client *rpmh_client;
>> + struct device *dev;
>> + size_t num_clks, i;
>> + int ret;
>> +
>> + dev = &pdev->dev;
>> +
>> + ret = cmd_db_ready();
>> + if (ret) {
>> + if (ret != -EPROBE_DEFER) {
>> + dev_err(dev, "Command DB not available (%d)\n", ret);
>> + goto fail;
>
> Please just return error here instead of goto.
>
Sure would clean this.
>> + }
>> + return ret;
>> + }
>> +
>> + rpmh_client = rpmh_get_client(pdev);
>> + if (IS_ERR(rpmh_client)) {
>> + ret = PTR_ERR(rpmh_client);
>> + dev_err(dev, "Failed to request RPMh client, ret=%d\n", ret);
>> + return ret;
>> + }
>
> I hope we get rid of rpmh_get_client() still.
> >> +
>> + desc = of_device_get_match_data(&pdev->dev);
>> + hw_clks = desc->clks;
>> + num_clks = desc->num_clks;
>> +
>> + rcc = devm_kzalloc(&pdev->dev, sizeof(*rcc) + sizeof(*clks) * num_clks,
>> + GFP_KERNEL);
>> + if (!rcc) {
>> + ret = -ENOMEM;
>> + goto err;
>> + }
>> +
>> + clks = rcc->clks;
>> + data = &rcc->data;
>> + data->clks = clks;
>> + data->clk_num = num_clks;
>> +
>> + for (i = 0; i < num_clks; i++) {
>> + rpmh_clk = to_clk_rpmh(hw_clks[i]);
>> + rpmh_clk->res_addr = cmd_db_read_addr(rpmh_clk->res_name);
>> + if (!rpmh_clk->res_addr) {
>> + dev_err(dev, "missing RPMh resource address for %s\n",
>> + rpmh_clk->res_name);
>> + ret = -ENODEV;
>> + goto err;
>> + }
>> +
>> + rpmh_clk->rpmh_client = rpmh_client;
>> +
>> + clk = devm_clk_register(&pdev->dev, hw_clks[i]);
>> + if (IS_ERR(clk)) {
>> + ret = PTR_ERR(clk);
>> + dev_err(dev, "failed to register %s\n",
>> + hw_clks[i]->init->name);
>
> This isn't a useful error message either.
>
>> + goto err;
>> + }
>> +
>> + clks[i] = clk;
>> + rpmh_clk->dev = &pdev->dev;
>> + }
>> +
>> + ret = of_clk_add_provider(pdev->dev.of_node, of_clk_src_onecell_get,
>
> Use devm please and register clk_hw pointers instead of clk pointers.
>
Sure would move to use devm & would register clk_hw.
>> + data);
>> + if (ret) {
>> + dev_err(dev, "Failed to add clock provider\n");
>> + goto err;
>> + }
>> +
>> + dev_dbg(dev, "Registered RPMh clocks\n");
>> +
>> + return 0;
>> +err:
>> + if (rpmh_client)
>> + rpmh_release(rpmh_client);
>> +fail:
>> + dev_err(dev, "Error registering RPMh Clock driver (%d)\n", ret);
>
> Please remove this error message.
>
Thanks would remove the above.
>> + return ret;
>> +}
>> +
>> +static int clk_rpmh_remove(struct platform_device *pdev)
>> +{
>> + const struct clk_rpmh_desc *desc =
>> + of_device_get_match_data(&pdev->dev);
>> + struct clk_hw **hw_clks = desc->clks;
>> + struct clk_rpmh *rpmh_clk = to_clk_rpmh(hw_clks[0]);
>> +
>> + rpmh_release(rpmh_clk->rpmh_client);
>> + of_clk_del_provider(pdev->dev.of_node);
>> +
>> + return 0;
>> +}
>
> Hopefully this whole remove function goes away.
> We would still require the rpmh_release code.
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation.
--
Powered by blists - more mailing lists