| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 25 Apr 2018 00:02:56 +0200
From: Enric Balletbo Serra <eballetbo@...il.com>
To: Abel Vesa <abel.vesa@....com>
Cc: Lee Jones <lee.jones@...aro.org>,
Sebastian Reichel <sre@...nel.org>,
Robin Gong <yibin.gong@....com>,
linux-kernel <linux-kernel@...r.kernel.org>,
Linux PM list <linux-pm@...r.kernel.org>, linux-imx@....com,
Abel Vesa <abelvesa@...ux.com>
Subject: Re: [PATCH 2/2] power: pf1550_charger: add pf1550 charger driver
Hi Abel,
Some comments below, hope will be helpful for you.
2018-04-17 16:20 GMT+02:00 Abel Vesa <abel.vesa@....com>:
> From: Robin Gong <b38343@...escale.com>
>
> Add basic pf1550 charger driver.
>
> Signed-off-by: Robin Gong <yibin.gong@....com>
> Signed-off-by: Abel Vesa <abel.vesa@....com>
> ---
> drivers/power/supply/Kconfig | 6 +
> drivers/power/supply/Makefile | 1 +
> drivers/power/supply/pf1550_charger.c | 660 ++++++++++++++++++++++++++++++++++
> 3 files changed, 667 insertions(+)
> create mode 100644 drivers/power/supply/pf1550_charger.c
>
> diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
> index 428b426..2ebd38c 100644
> --- a/drivers/power/supply/Kconfig
> +++ b/drivers/power/supply/Kconfig
> @@ -380,6 +380,12 @@ config CHARGER_PCF50633
> help
> Say Y to include support for NXP PCF50633 Main Battery Charger.
>
> +config CHARGER_PF1550
> + tristate "Freescale PF1550 battery charger driver"
> + depends on MFD_PF1550
> + help
> + Say Y to enable support for the Freescale PF1550 battery charger.
> +
> config BATTERY_JZ4740
> tristate "Ingenic JZ4740 battery"
> depends on MACH_JZ4740
> diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
> index e83aa84..0b2e424 100644
> --- a/drivers/power/supply/Makefile
> +++ b/drivers/power/supply/Makefile
> @@ -55,6 +55,7 @@ obj-$(CONFIG_BATTERY_S3C_ADC) += s3c_adc_battery.o
> obj-$(CONFIG_BATTERY_TWL4030_MADC) += twl4030_madc_battery.o
> obj-$(CONFIG_CHARGER_88PM860X) += 88pm860x_charger.o
> obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o
> +obj-$(CONFIG_CHARGER_PF1550) += pf1550_charger.o
> obj-$(CONFIG_BATTERY_JZ4740) += jz4740-battery.o
> obj-$(CONFIG_BATTERY_RX51) += rx51_battery.o
> obj-$(CONFIG_AB8500_BM) += ab8500_bmdata.o ab8500_charger.o ab8500_fg.o ab8500_btemp.o abx500_chargalg.o pm2301_charger.o
> diff --git a/drivers/power/supply/pf1550_charger.c b/drivers/power/supply/pf1550_charger.c
> new file mode 100644
> index 0000000..c5e0c55
> --- /dev/null
> +++ b/drivers/power/supply/pf1550_charger.c
> @@ -0,0 +1,660 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * pf1550_charger.c - regulator driver for the PF1550
> + *
> + * Copyright (C) 2016 Freescale Semiconductor, Inc.
> + * Robin Gong <yibin.gong@...escale.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
I think that the general consensus is to remove the GPL notice if you
provide the SPDX license identifier.
> + */
> +
> +#include <linux/interrupt.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/power_supply.h>
> +#include <linux/regmap.h>
> +#include <linux/mfd/pf1550.h>
> +
> +#define PF1550_CHARGER_NAME "pf1550-charger"
> +#define PF1550_DEFAULT_CONSTANT_VOLT 4200000
> +#define PF1550_DEFAULT_MIN_SYSTEM_VOLT 3500000
> +#define PF1550_DEFAULT_THERMAL_TEMP 75
> +
> +static const char *pf1550_charger_model = "PF1550";
> +static const char *pf1550_charger_manufacturer = "Freescale";
> +
> +struct pf1550_charger {
> + struct device *dev;
> + struct pf1550_dev *pf1550;
> + struct power_supply *charger;
> + struct power_supply_desc psy_desc;
> + int irq;
> + struct delayed_work irq_work;
> + struct mutex mutex;
> +
> + u32 constant_volt;
> + u32 min_system_volt;
> + u32 thermal_regulation_temp;
> +};
> +
> +static struct pf1550_irq_info pf1550_charger_irqs[] = {
> + { PF1550_CHARG_IRQ_BAT2SOCI, "BAT2SOC" },
> + { PF1550_CHARG_IRQ_BATI, "BAT" },
> + { PF1550_CHARG_IRQ_CHGI, "CHG" },
> + { PF1550_CHARG_IRQ_VBUSI, "VBUS" },
> + { PF1550_CHARG_IRQ_THMI, "THM" },
> +};
> +
> +static int pf1550_get_charger_state(struct regmap *regmap, int *val)
> +{
> + int ret;
> + unsigned int data;
> +
> + ret = regmap_read(regmap, PF1550_CHARG_REG_CHG_SNS, &data);
> + if (ret < 0)
> + return ret;
> +
> + data &= PF1550_CHG_SNS_MASK;
> +
> + switch (data) {
> + case PF1550_CHG_PRECHARGE:
> + case PF1550_CHG_CONSTANT_CURRENT:
> + case PF1550_CHG_CONSTANT_VOL:
> + case PF1550_CHG_EOC:
> + *val = POWER_SUPPLY_STATUS_CHARGING;
> + break;
> + case PF1550_CHG_DONE:
> + *val = POWER_SUPPLY_STATUS_FULL;
> + break;
> + case PF1550_CHG_TIMER_FAULT:
> + case PF1550_CHG_SUSPEND:
> + *val = POWER_SUPPLY_STATUS_NOT_CHARGING;
> + break;
> + case PF1550_CHG_OFF_INV:
> + case PF1550_CHG_OFF_TEMP:
> + case PF1550_CHG_LINEAR_ONLY:
> + *val = POWER_SUPPLY_STATUS_DISCHARGING;
> + break;
> + default:
> + *val = POWER_SUPPLY_STATUS_UNKNOWN;
> + }
> +
> + return 0;
> +}
> +
> +static int pf1550_get_charge_type(struct regmap *regmap, int *val)
> +{
> + int ret;
> + unsigned int data;
> +
> + ret = regmap_read(regmap, PF1550_CHARG_REG_CHG_SNS, &data);
> + if (ret < 0)
> + return ret;
> +
> + data &= PF1550_CHG_SNS_MASK;
> +
> + switch (data) {
> + case PF1550_CHG_SNS_MASK:
> + *val = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
> + break;
> + case PF1550_CHG_CONSTANT_CURRENT:
> + case PF1550_CHG_CONSTANT_VOL:
> + case PF1550_CHG_EOC:
> + *val = POWER_SUPPLY_CHARGE_TYPE_FAST;
> + break;
> + case PF1550_CHG_DONE:
> + case PF1550_CHG_TIMER_FAULT:
> + case PF1550_CHG_SUSPEND:
> + case PF1550_CHG_OFF_INV:
> + case PF1550_CHG_BAT_OVER:
> + case PF1550_CHG_OFF_TEMP:
> + case PF1550_CHG_LINEAR_ONLY:
> + *val = POWER_SUPPLY_CHARGE_TYPE_NONE;
> + break;
> + default:
> + *val = POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
> + }
> +
> + return 0;
> +}
> +
> +/*
> + * Supported health statuses:
> + * - POWER_SUPPLY_HEALTH_DEAD
> + * - POWER_SUPPLY_HEALTH_GOOD
> + * - POWER_SUPPLY_HEALTH_OVERVOLTAGE
> + * - POWER_SUPPLY_HEALTH_UNKNOWN
> + */
> +static int pf1550_get_battery_health(struct regmap *regmap, int *val)
> +{
> + int ret;
> + unsigned int data;
> +
> + ret = regmap_read(regmap, PF1550_CHARG_REG_BATT_SNS, &data);
> + if (ret < 0)
> + return ret;
> +
> + data &= PF1550_BAT_SNS_MASK;
> +
> + switch (data) {
> + case PF1550_BAT_NO_DETECT:
> + *val = POWER_SUPPLY_HEALTH_DEAD;
> + break;
> + case PF1550_BAT_NO_VBUS:
> + case PF1550_BAT_LOW_THAN_PRECHARG:
> + case PF1550_BAT_CHARG_FAIL:
> + case PF1550_BAT_HIGH_THAN_PRECHARG:
> + *val = POWER_SUPPLY_HEALTH_GOOD;
> + break;
> + case PF1550_BAT_OVER_VOL:
> + *val = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
> + break;
> + default:
> + *val = POWER_SUPPLY_HEALTH_UNKNOWN;
> + break;
> + }
> +
> + return 0;
> +}
> +
> +static int pf1550_get_present(struct regmap *regmap, int *val)
> +{
> + unsigned int data;
> + int ret;
> +
> + ret = regmap_read(regmap, PF1550_CHARG_REG_BATT_SNS, &data);
> + if (ret < 0)
> + return ret;
> +
> + data &= PF1550_BAT_SNS_MASK;
> + *val = (data == PF1550_BAT_NO_DETECT) ? 0 : 1;
> +
> + return 0;
> +}
> +
> +static int pf1550_get_online(struct regmap *regmap, int *val)
> +{
> + unsigned int data;
> + int ret;
> +
> + ret = regmap_read(regmap, PF1550_CHARG_REG_VBUS_SNS, &data);
> + if (ret < 0)
> + return ret;
> +
> + *val = (data & PF1550_VBUS_VALID) ? 1 : 0;
> +
> + return 0;
> +}
> +
> +static void pf1550_chg_bat_isr(struct pf1550_charger *chg)
> +{
> + unsigned int data;
> +
> + if (regmap_read(chg->pf1550->regmap,
> + PF1550_CHARG_REG_BATT_SNS, &data)) {
> + dev_err(chg->dev, "Read BATT_SNS error.\n");
> + return;
> + }
> +
> + switch (data & PF1550_BAT_SNS_MASK) {
> + case PF1550_BAT_NO_VBUS:
> + dev_dbg(chg->dev, "No valid VBUS input.\n");
> + break;
> + case PF1550_BAT_LOW_THAN_PRECHARG:
> + dev_dbg(chg->dev, "VBAT < VPRECHG.LB.\n");
> + break;
> + case PF1550_BAT_CHARG_FAIL:
> + dev_dbg(chg->dev, "Battery charging failed.\n");
> + break;
> + case PF1550_BAT_HIGH_THAN_PRECHARG:
> + dev_dbg(chg->dev, "VBAT > VPRECHG.LB.\n");
> + break;
> + case PF1550_BAT_OVER_VOL:
> + dev_dbg(chg->dev, "VBAT > VBATOV.\n");
> + break;
> + case PF1550_BAT_NO_DETECT:
> + dev_dbg(chg->dev, "Battery not detected.\n");
> + break;
> + default:
> + dev_err(chg->dev, "Unknown value read:%x\n",
> + data & PF1550_CHG_SNS_MASK);
> + }
> +}
> +
nit: This function only prints a debug message or an error and you do
nothing with the info, maybe you can consider adding this kind of
info in debugfs instead?
> +static void pf1550_chg_chg_isr(struct pf1550_charger *chg)
> +{
> + unsigned int data;
> +
> + if (regmap_read(chg->pf1550->regmap,
> + PF1550_CHARG_REG_CHG_SNS, &data)) {
> + dev_err(chg->dev, "Read CHG_SNS error.\n");
> + return;
> + }
> +
> + switch (data & PF1550_CHG_SNS_MASK) {
> + case PF1550_CHG_PRECHARGE:
> + dev_dbg(chg->dev, "In pre-charger mode.\n");
> + break;
> + case PF1550_CHG_CONSTANT_CURRENT:
> + dev_dbg(chg->dev, "In fast-charge constant current mode.\n");
> + break;
> + case PF1550_CHG_CONSTANT_VOL:
> + dev_dbg(chg->dev, "In fast-charge constant voltage mode.\n");
> + break;
> + case PF1550_CHG_EOC:
> + dev_dbg(chg->dev, "In EOC mode.\n");
> + break;
> + case PF1550_CHG_DONE:
> + dev_dbg(chg->dev, "In DONE mode.\n");
> + break;
> + case PF1550_CHG_TIMER_FAULT:
> + dev_info(chg->dev, "In timer fault mode.\n");
> + break;
> + case PF1550_CHG_SUSPEND:
> + dev_info(chg->dev, "In thermistor suspend mode.\n");
> + break;
> + case PF1550_CHG_OFF_INV:
> + dev_info(chg->dev, "Input invalid, charger off.\n");
> + break;
> + case PF1550_CHG_BAT_OVER:
> + dev_info(chg->dev, "Battery over-voltage.\n");
> + break;
> + case PF1550_CHG_OFF_TEMP:
> + dev_info(chg->dev, "Temp high, charger off.\n");
> + break;
> + case PF1550_CHG_LINEAR_ONLY:
> + dev_dbg(chg->dev, "In Linear mode, not charging.\n");
> + break;
> + default:
> + dev_err(chg->dev, "Unknown value read:%x\n",
> + data & PF1550_CHG_SNS_MASK);
> + }
> +}
> +
nit: debugfs?
> +static void pf1550_chg_vbus_isr(struct pf1550_charger *chg)
> +{
> + enum power_supply_type old_type;
> + unsigned int data;
> +
> + if (regmap_read(chg->pf1550->regmap,
> + PF1550_CHARG_REG_VBUS_SNS, &data)) {
> + dev_err(chg->dev, "Read VBUS_SNS error.\n");
> + return;
> + }
> +
> + old_type = chg->psy_desc.type;
> +
> + if (data & PF1550_VBUS_UVLO) {
> + chg->psy_desc.type = POWER_SUPPLY_TYPE_BATTERY;
> + dev_dbg(chg->dev, "VBUS deattached.\n");
> + }
> + if (data & PF1550_VBUS_IN2SYS)
> + dev_dbg(chg->dev, "VBUS_IN2SYS_SNS.\n");
> + if (data & PF1550_VBUS_OVLO)
> + dev_dbg(chg->dev, "VBUS_OVLO_SNS.\n");
> + if (data & PF1550_VBUS_VALID) {
> + chg->psy_desc.type = POWER_SUPPLY_TYPE_MAINS;
> + dev_dbg(chg->dev, "VBUS attached.\n");
> + }
> +
> + if (old_type != chg->psy_desc.type)
> + power_supply_changed(chg->charger);
> +}
> +
> +static irqreturn_t pf1550_charger_irq_handler(int irq, void *data)
> +{
> + struct pf1550_charger *chg = data;
> +
> + chg->irq = irq;
> + schedule_delayed_work(&chg->irq_work, msecs_to_jiffies(10));
> +
> + return IRQ_HANDLED;
> +}
> +
> +static void pf1550_charger_irq_work(struct work_struct *work)
> +{
> + struct pf1550_charger *chg = container_of(to_delayed_work(work),
> + struct pf1550_charger,
> + irq_work);
> + int i, irq_type = -1;
> + unsigned int status;
> +
> + if (!chg->charger)
> + return;
> +
> + mutex_lock(&chg->mutex);
> +
> + for (i = 0; i < ARRAY_SIZE(pf1550_charger_irqs); i++)
> + if (chg->irq == pf1550_charger_irqs[i].virq)
> + irq_type = pf1550_charger_irqs[i].irq;
> +
> + switch (irq_type) {
> + case PF1550_CHARG_IRQ_BAT2SOCI:
> + dev_info(chg->dev, "BAT to SYS Overcurrent interrupt.\n");
> + break;
> + case PF1550_CHARG_IRQ_BATI:
> + pf1550_chg_bat_isr(chg);
> + break;
> + case PF1550_CHARG_IRQ_CHGI:
> + pf1550_chg_chg_isr(chg);
> + break;
> + case PF1550_CHARG_IRQ_VBUSI:
> + pf1550_chg_vbus_isr(chg);
> + break;
> + case PF1550_CHARG_IRQ_THMI:
> + dev_info(chg->dev, "Thermal interrupt.\n");
> + break;
> + default:
> + dev_err(chg->dev, "unknown interrupt occurred.\n");
> + }
> +
> + if (regmap_read(chg->pf1550->regmap, PF1550_CHARG_REG_CHG_INT, &status))
> + dev_err(chg->dev, "Read CHG_INT error.\n");
> + if (regmap_write(chg->pf1550->regmap, PF1550_CHARG_REG_CHG_INT, status))
> + dev_err(chg->dev, "clear CHG_INT error.\n");
> +
> + mutex_unlock(&chg->mutex);
> +}
> +
> +static enum power_supply_property pf1550_charger_props[] = {
> + POWER_SUPPLY_PROP_STATUS,
> + POWER_SUPPLY_PROP_CHARGE_TYPE,
> + POWER_SUPPLY_PROP_HEALTH,
> + POWER_SUPPLY_PROP_PRESENT,
> + POWER_SUPPLY_PROP_ONLINE,
> + POWER_SUPPLY_PROP_MODEL_NAME,
> + POWER_SUPPLY_PROP_MANUFACTURER,
> +};
> +
> +static int pf1550_charger_get_property(struct power_supply *psy,
> + enum power_supply_property psp,
> + union power_supply_propval *val)
> +{
> + struct pf1550_charger *chg = power_supply_get_drvdata(psy);
> + struct regmap *regmap = chg->pf1550->regmap;
> + int ret = 0;
> +
> + switch (psp) {
> + case POWER_SUPPLY_PROP_STATUS:
> + ret = pf1550_get_charger_state(regmap, &val->intval);
> + break;
> + case POWER_SUPPLY_PROP_CHARGE_TYPE:
> + ret = pf1550_get_charge_type(regmap, &val->intval);
> + break;
> + case POWER_SUPPLY_PROP_HEALTH:
> + ret = pf1550_get_battery_health(regmap, &val->intval);
> + break;
> + case POWER_SUPPLY_PROP_PRESENT:
> + ret = pf1550_get_present(regmap, &val->intval);
> + break;
> + case POWER_SUPPLY_PROP_ONLINE:
> + ret = pf1550_get_online(regmap, &val->intval);
> + break;
> + case POWER_SUPPLY_PROP_MODEL_NAME:
> + val->strval = pf1550_charger_model;
> + break;
> + case POWER_SUPPLY_PROP_MANUFACTURER:
> + val->strval = pf1550_charger_manufacturer;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return ret;
> +}
> +
> +static int pf1550_set_constant_volt(struct pf1550_charger *chg,
> + unsigned int uvolt)
> +{
> + unsigned int data;
> +
> + if (uvolt >= 3500000 && uvolt <= 4440000)
> + data = 8 + (uvolt - 3500000) / 20000;
You should use braces {} for this statement.
> + else {
> + dev_err(chg->dev, "Wrong value for constant voltage\n");
> + return -EINVAL;
> + }
> +
> + dev_dbg(chg->dev, "Charging constant voltage: %u (0x%x)\n", uvolt,
> + data);
> +
> + return regmap_update_bits(chg->pf1550->regmap,
> + PF1550_CHARG_REG_BATT_REG,
> + PF1550_CHARG_REG_BATT_REG_CHGCV_MASK, data);
> +}
> +
> +static int pf1550_set_min_system_volt(struct pf1550_charger *chg,
> + unsigned int uvolt)
> +{
> + unsigned int data;
> +
> + switch (uvolt) {
> + case 3500000:
> + data = 0x0;
> + break;
> + case 3700000:
> + data = 0x1;
> + break;
> + case 4300000:
> + data = 0x2;
> + break;
> + default:
> + dev_err(chg->dev, "Wrong value for minimum system voltage\n");
> + return -EINVAL;
> + }
> +
> + data <<= PF1550_CHARG_REG_BATT_REG_VMINSYS_SHIFT;
> +
> + dev_dbg(chg->dev, "Minimum system regulation voltage: %u (0x%x)\n",
> + uvolt, data);
> +
> + return regmap_update_bits(chg->pf1550->regmap,
> + PF1550_CHARG_REG_BATT_REG,
> + PF1550_CHARG_REG_BATT_REG_VMINSYS_MASK, data);
> +}
> +
> +static int pf1550_set_thermal_regulation_temp(struct pf1550_charger *chg,
> + unsigned int cels)
> +{
> + unsigned int data;
> +
> + switch (cels) {
> + case 60:
> + data = 0x0;
> + break;
> + case 75:
> + data = 0x1;
> + break;
> + case 90:
> + data = 0x2;
> + break;
> + case 105:
> + data = 0x3;
> + break;
> + default:
> + dev_err(chg->dev, "Wrong value for thermal temperature\n");
> + return -EINVAL;
> + }
> +
> + data <<= PF1550_CHARG_REG_THM_REG_CNFG_REGTEMP_SHIFT;
> +
> + dev_dbg(chg->dev, "Thermal regulation loop temperature: %u (0x%x)\n",
> + cels, data);
> +
> + return regmap_update_bits(chg->pf1550->regmap,
> + PF1550_CHARG_REG_THM_REG_CNFG,
> + PF1550_CHARG_REG_THM_REG_CNFG_REGTEMP_MASK, data);
> +}
> +
> +/*
> + * Sets charger registers to proper and safe default values.
> + */
> +static int pf1550_reg_init(struct pf1550_charger *chg)
> +{
> + int ret;
> + unsigned int data;
> +
> + /* Unmask charger interrupt, mask DPMI and reserved bit */
> + ret = regmap_write(chg->pf1550->regmap, PF1550_CHARG_REG_CHG_INT_MASK,
> + 0x51);
Better do not use magic numbers.
> + if (ret) {
> + dev_err(chg->dev, "Error unmask charger interrupt: %d\n", ret);
> + return ret;
> + }
> +
> + ret = regmap_read(chg->pf1550->regmap, PF1550_CHARG_REG_VBUS_SNS,
> + &data);
> + if (ret) {
> + dev_err(chg->dev, "Read charg vbus_sns error: %d\n", ret);
> + return ret;
> + }
> +
> + if (data & PF1550_VBUS_VALID)
> + chg->psy_desc.type = POWER_SUPPLY_TYPE_MAINS;
> +
> + ret = pf1550_set_constant_volt(chg, chg->constant_volt);
> + if (ret)
> + return ret;
> +
> + ret = pf1550_set_min_system_volt(chg, chg->min_system_volt);
> + if (ret)
> + return ret;
> +
> + ret = pf1550_set_thermal_regulation_temp(chg,
> + chg->thermal_regulation_temp);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +static int pf1550_dt_init(struct device *dev, struct pf1550_charger *chg)
> +{
> + struct device_node *np = dev->of_node;
> +
> + if (!np) {
> + dev_err(dev, "no charger OF node\n");
> + return -EINVAL;
> + }
> +
> + if (of_property_read_u32(np, "fsl,constant-microvolt",
> + &chg->constant_volt))
> + chg->constant_volt = PF1550_DEFAULT_CONSTANT_VOLT;
> +
> + if (of_property_read_u32(np, "fsl,min-system-microvolt",
> + &chg->min_system_volt))
> + chg->min_system_volt = PF1550_DEFAULT_MIN_SYSTEM_VOLT;
> +
> + if (of_property_read_u32(np, "fsl,thermal-regulation",
> + &chg->thermal_regulation_temp))
> + chg->thermal_regulation_temp = PF1550_DEFAULT_THERMAL_TEMP;
> +
All these properties should be documented with a binding.
> + return 0;
> +}
> +
> +static int pf1550_charger_probe(struct platform_device *pdev)
> +{
> + struct pf1550_charger *chg;
> + struct power_supply_config psy_cfg = {};
> + struct pf1550_dev *pf1550 = dev_get_drvdata(pdev->dev.parent);
> + int i, ret;
> +
> + chg = devm_kzalloc(&pdev->dev, sizeof(*chg), GFP_KERNEL);
> + if (!chg)
> + return -ENOMEM;
> +
> + chg->dev = &pdev->dev;
> + chg->pf1550 = pf1550;
> +
> + platform_set_drvdata(pdev, chg);
> +
> + ret = pf1550_dt_init(&pdev->dev, chg);
> + if (ret)
> + return ret;
> +
> + mutex_init(&chg->mutex);
> +
> + INIT_DELAYED_WORK(&chg->irq_work, pf1550_charger_irq_work);
> +
> + for (i = 0; i < ARRAY_SIZE(pf1550_charger_irqs); i++) {
> + struct pf1550_irq_info *charger_irq =
> + &pf1550_charger_irqs[i];
> + unsigned int virq = 0;
> +
> + virq = regmap_irq_get_virq(pf1550->irq_data_charger,
> + charger_irq->irq);
> + if (!virq)
> + return -EINVAL;
> +
> + charger_irq->virq = virq;
> +
> + ret = devm_request_threaded_irq(&pdev->dev, virq, NULL,
> + pf1550_charger_irq_handler,
> + IRQF_NO_SUSPEND,
> + charger_irq->name, chg);
> + if (ret) {
> + dev_err(&pdev->dev,
> + "failed: irq request (IRQ: %d, error :%d)\n",
> + charger_irq->irq, ret);
> + return ret;
> + }
> + }
> +
> + psy_cfg.drv_data = chg;
> +
> + chg->psy_desc.name = PF1550_CHARGER_NAME;
> + chg->psy_desc.type = POWER_SUPPLY_TYPE_BATTERY;
> + chg->psy_desc.get_property = pf1550_charger_get_property;
> + chg->psy_desc.properties = pf1550_charger_props;
> + chg->psy_desc.num_properties = ARRAY_SIZE(pf1550_charger_props);
> +
> + chg->charger = power_supply_register(&pdev->dev, &chg->psy_desc,
> + &psy_cfg);
Use the devm_ variant.
> + if (IS_ERR(chg->charger)) {
> + dev_err(&pdev->dev, "failed: power supply register\n");
> + ret = PTR_ERR(chg->charger);
> + return ret;
> + }
> +
> + ret = pf1550_reg_init(chg);
> +
> + return ret;
> +}
> +
> +static int pf1550_charger_remove(struct platform_device *pdev)
> +{
> + struct pf1550_charger *chg = platform_get_drvdata(pdev);
> +
> + cancel_delayed_work_sync(&chg->irq_work);
> + power_supply_unregister(chg->charger);
You can drop power_supply_unregister after using the devm_
registration function.
> +
> + return 0;
> +}
> +
> +static const struct platform_device_id pf1550_charger_id[] = {
> + { "pf1550-charger", 0, },
Remove the comma after the 0
> + { }
> +};
{ /*sentinel */ }
> +MODULE_DEVICE_TABLE(platform, pf1550_charger_id);
> +
> +static struct platform_driver pf1550_charger_driver = {
> + .driver = {
> + .name = "pf1550-charger",
> + },
> + .probe = pf1550_charger_probe,
> + .remove = pf1550_charger_remove,
> + .id_table = pf1550_charger_id,
> +};
> +module_platform_driver(pf1550_charger_driver);
> +
> +MODULE_AUTHOR("Robin Gong <yibin.gong@...escale.com>");
> +MODULE_DESCRIPTION("PF1550 charger driver");
> +MODULE_LICENSE("GPL");
> --
> 2.7.4
>
Powered by blists - more mailing lists