[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1524556449-5262-3-git-send-email-yannick.fertre@st.com>
Date: Tue, 24 Apr 2018 09:54:08 +0200
From: yannick fertre <yannick.fertre@...com>
To: Philippe Cornu <philippe.cornu@...com>,
Alexandre Torgue <alexandre.torgue@...com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
Loic Pallardy <loic.pallardy@...com>,
"Gerald Baeza" <gerald.baeza@...com>,
Patrice Chotard <patrice.chotard@...com>,
"Kamel Kholti" <kamel.kholti@...com>
CC: Benjamin Gaignard <benjamin.gaignard@...com>
Subject: [PATCH v1 2/3] ARM: dts: stm32: add cec pins to stm32mp157c
This patch adds cec support on stm32mp157c eval board.
Signed-off-by: Yannick Fertre <yannick.fertre@...com>
---
arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
index 6f044100..67b0349 100644
--- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
@@ -14,6 +14,15 @@
ranges = <0 0x50002000 0xa400>;
pins-are-numbered;
+ cec_pins_a: cec@0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 15, AF4)>;
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
gpioa: gpio@...02000 {
gpio-controller;
#gpio-cells = <2>;
--
1.9.1
Powered by blists - more mailing lists