linux-kernel - [PATCH v3 0/2] Add support for ov7251 camera sensor

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1524582067-28585-1-git-send-email-todor.tomov@linaro.org>
Date:   Tue, 24 Apr 2018 18:01:05 +0300
From:   Todor Tomov <todor.tomov@...aro.org>
To:     mchehab@...nel.org, hverkuil@...all.nl, sakari.ailus@....fi,
        laurent.pinchart@...asonboard.com, linux-media@...r.kernel.org,
        linux-kernel@...r.kernel.org
Cc:     Todor Tomov <todor.tomov@...aro.org>
Subject: [PATCH v3 0/2] Add support for ov7251 camera sensor

The ov7251 sensor is a 1/7.5-Inch B&W VGA (640x480) CMOS Digital Image
Sensor from Omnivision.

--------------------------------------------------------------------------

Version 3:
- DT binding: added that there shall be a single endpoint node in the port node;
- added a comment for regulator enable order;
- set exposure and gain with a single i2c transaction;
- caclulate sleep after gpio config from external clock frequency;
- use MEDIA_BUS_FMT_Y10_1X10 format code;
- lock for power state, controls, mode and start streaming;
- remove regulator_set_voltage();
- use probe_new();
- remove i2c_device_id table;
- change of_property_read_u32 to fwnode_property_read_u32;
- few corrections from checkpatch --strict.

--------------------------------------------------------------------------

Version 2:
- changed ov7251 node's name in DT binding example;
- SPDX licence identifier;
- better names for register value defines;
- remove power reference counting and leave a power state only;
- use v4l2_find_nearest_size() to find sensor mode by requested size;
- set ycbcr_enc, quantization and xfer_func in set_fmt;
- use struct fwnode_handle instead of struct device_node;
- add comment in driver about external clock value.

--------------------------------------------------------------------------

Todor Tomov (2):
  dt-bindings: media: Binding document for OV7251 camera sensor
  media: Add a driver for the ov7251 camera sensor

 .../devicetree/bindings/media/i2c/ov7251.txt       |   52 +
 drivers/media/i2c/Kconfig                          |   13 +
 drivers/media/i2c/Makefile                         |    1 +
 drivers/media/i2c/ov7251.c                         | 1501 ++++++++++++++++++++
 4 files changed, 1567 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/ov7251.txt
 create mode 100644 drivers/media/i2c/ov7251.c

-- 
2.7.4