lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  PHC 
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Thu, 26 Apr 2018 19:17:42 -0500
From:   David Lechner <>
Cc:     Michael Turquette <>,
        Stephen Boyd <>,
        Rob Herring <>,
        Mark Rutland <>,
        Sekhar Nori <>,
        Kevin Hilman <>,
        Bartosz Golaszewski <>,
        Adam Ford <>,,
        David Lechner <>
Subject: [PATCH v9 24/27] dt-bindings: timer: new bindings for TI DaVinci timer

This adds new device tree bindings for the timer IP block of TI
DaVinci-like SoCs.

Signed-off-by: David Lechner <>

v9 changes:
- new patch in v9

 .../bindings/timer/ti,davinci-timer.txt       | 24 +++++++++++++++++++
 1 file changed, 24 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/timer/ti,davinci-timer.txt

diff --git a/Documentation/devicetree/bindings/timer/ti,davinci-timer.txt b/Documentation/devicetree/bindings/timer/ti,davinci-timer.txt
new file mode 100644
index 000000000000..2091eca46981
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/ti,davinci-timer.txt
@@ -0,0 +1,24 @@
+* Device tree bindings for Texas Instruments DaVinci timer
+This document provides bindings for the 64-bit timer in the DaVinci
+architecture devices. The timer can be configured as a general-purpose 64-bit
+timer, dual general-purpose 32-bit timers. When configured as dual 32-bit
+timers, each half can operate in conjunction (chain mode) or independently
+(unchained mode) of each other.
+It is global timer is a free running up-counter and can generate interrupt
+when the counter reaches preset counter values.
+Required properties:
+- compatible : should be "ti,davinci-timer".
+- reg : specifies base physical address and count of the registers.
+- clocks : the clock feeding the timer clock.
+	clocksource: timer@...00 {
+		compatible = "ti,davinci-timer";
+		reg = <0x20000 0x1000>;
+		clocks = <&pll0_auxclk>;
+	};

Powered by blists - more mailing lists