linux-kernel - Re: [PATCH] ARM64: dts: meson: disable sd-uhs modes on the libretech-cc

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <7hvacczcis.fsf@baylibre.com>
Date:   Fri, 27 Apr 2018 12:15:39 -0700
From:   Kevin Hilman <khilman@...libre.com>
To:     Jerome Brunet <jbrunet@...libre.com>
Cc:     Carlo Caione <carlo@...one.org>, devicetree@...r.kernel.org,
        linux-amlogic@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] ARM64: dts: meson: disable sd-uhs modes on the libretech-cc

Jerome Brunet <jbrunet@...libre.com> writes:

> There is a problem with the sd-uhs mode when doing a soft reboot.
> Switching back from 1.8v to 3.3v messes with the card, which no longer
> respond (timeout errors). According to the specification, we should
> perform a card reset (power cycling the card) but this is something we
> cannot control on this design.
>
> Then the only solution to restore the communication with the card is an
> "unplug-plug" which is not acceptable
>
> Until we find a solution, if any, disable the sd-uhs modes on this design.
> For the people using uhs at the moment, there will a performance drop as
> a result.
>
> Fixes: 3cde63ebc85c ("ARM64: dts: meson-gxl: libretech-cc: enable high speed modes")
> Signed-off-by: Jerome Brunet <jbrunet@...libre.com>

Applied to v4.17/fixes, and adding a Cc to stable.

Thanks,

Kevin