| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 27 Apr 2018 18:36:06 +0800
From: John Garry <john.garry@...wei.com>
To: <gregkh@...uxfoundation.org>, <jslaby@...e.com>, <joel@....id.au>,
<p.zabel@...gutronix.de>, <arnd@...db.de>, <fcooper@...com>,
<sergei.shtylyov@...entembedded.com>,
<yamada.masahiro@...ionext.com>, <khoroshilov@...ras.ru>
CC: <linux-serial@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<andriy.shevchenko@...ux.intel.com>, <linuxarm@...wei.com>,
John Garry <john.garry@...wei.com>
Subject: [PATCH v2] serial: 8250_of: Add IO space support
Currently the 8250_of driver only supports MEM IO type
accesses.
Some development boards (Huawei D03, specifically) require
IO space access for 8250-compatible OF driver support, so
add it.
The modification is quite simple: just set the port iotype
and associated flags depending on the device address
resource type.
Signed-off-by: John Garry <john.garry@...wei.com>
---
Changes v1->v2:
- rebase to Greg's tty-testing branch
- use resource_type() helper
diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index 3de8d6a..bfb37f0 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -92,13 +92,43 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
goto err_unprepare;
}
+ port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_FIXED_PORT |
+ UPF_FIXED_TYPE;
spin_lock_init(&port->lock);
- port->mapbase = resource.start;
- port->mapsize = resource_size(&resource);
- /* Check for shifted address mapping */
- if (of_property_read_u32(np, "reg-offset", &prop) == 0)
- port->mapbase += prop;
+ if (resource_type(&resource) == IORESOURCE_IO) {
+ port->iotype = UPIO_PORT;
+ port->iobase = resource.start;
+ } else {
+ port->mapbase = resource.start;
+ port->mapsize = resource_size(&resource);
+
+ /* Check for shifted address mapping */
+ if (of_property_read_u32(np, "reg-offset", &prop) == 0)
+ port->mapbase += prop;
+
+ port->iotype = UPIO_MEM;
+ if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
+ switch (prop) {
+ case 1:
+ port->iotype = UPIO_MEM;
+ break;
+ case 2:
+ port->iotype = UPIO_MEM16;
+ break;
+ case 4:
+ port->iotype = of_device_is_big_endian(np) ?
+ UPIO_MEM32BE : UPIO_MEM32;
+ break;
+ default:
+ dev_warn(&ofdev->dev, "unsupported reg-io-width (%d)\n",
+ prop);
+ ret = -EINVAL;
+ goto err_dispose;
+ }
+ }
+ port->flags |= UPF_IOREMAP;
+ }
/* Check for registers offset within the devices address range */
if (of_property_read_u32(np, "reg-shift", &prop) == 0)
@@ -114,26 +144,6 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
port->line = ret;
port->irq = irq_of_parse_and_map(np, 0);
- port->iotype = UPIO_MEM;
- if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
- switch (prop) {
- case 1:
- port->iotype = UPIO_MEM;
- break;
- case 2:
- port->iotype = UPIO_MEM16;
- break;
- case 4:
- port->iotype = of_device_is_big_endian(np) ?
- UPIO_MEM32BE : UPIO_MEM32;
- break;
- default:
- dev_warn(&ofdev->dev, "unsupported reg-io-width (%d)\n",
- prop);
- ret = -EINVAL;
- goto err_dispose;
- }
- }
info->rst = devm_reset_control_get_optional_shared(&ofdev->dev, NULL);
if (IS_ERR(info->rst)) {
@@ -147,8 +157,6 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
port->type = type;
port->uartclk = clk;
- port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP
- | UPF_FIXED_PORT | UPF_FIXED_TYPE;
port->irqflags |= IRQF_SHARED;
if (of_property_read_bool(np, "no-loopback-test"))
--
1.9.1
Powered by blists - more mailing lists